#Compass """ This module lets you access the built-in electronic compass. Before using, the compass should be calibrated, otherwise the readings may be wrong. Warning: Calibrating the compass will cause your program to pause until calibration is complete. Calibration consists of a little game to draw a circle on the LED display by rotating the device. """ #Functions def calibrate(): """ Starts the calibration process. An instructive message will be scrolled to the user after which they will need to rotate the device in order to fill the LED display. """ pass def is_calibrated(): """ Returns True if the compass has been successfully calibrated, and returns False otherwise. """ pass def clear_calibration(): """ Undoes the calibration, making the compass uncalibrated again. """ pass def get_x(): """ Gives the reading of the magnetic field strength on the x axis in nano tesla, as a positive or negative integer, depending on the direction of the field. """ pass def get_y(): """ Gives the reading of the magnetic field strength on the y axis in nano tesla, as a positive or negative integer, depending on the direction of the field. """ pass def get_z(): """ Gives the reading of the magnetic field strength on the z axis in nano tesla, as a positive or negative integer, depending on the direction of the field. """ pass def heading(): """ Gives the compass heading, calculated from the above readings, as an integer in the range from 0 to 360, representing the angle in degrees, clockwise, with north as 0. """ pass def get_field_strength(): """ Returns an integer indication of the magnitude of the magnetic field around the device in nano tesla. """ pass