Reverts workaround added in acbdbcd9.
According to the linked ESP-IDF issue this was only a problem for ESP-IDF
V5.0.x, and support for versions older than V5.2 was dropped in 6e5d8d009.
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
Removes redundant metadata from each, shouldn't otherwise change
any build output.
Reverts the split originally added in e4650125.
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
Particularly for out of tree builds, one may need to provide alternative or
extra linker fragment files, or specify an absolute path to the default
`linker.lf` file.
In the default case, do nothing, provide a plain `linker.lf`, as before.
Signed-off-by: Karl Palsson <karl.palsson@marel.com>
Similar to other places, CMake will error out if this file
doesn't exist yet but we don't want this if we're only getting
the list of submodules.
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
When a wrapped symbol is provided in its own file, it's possible for the
linker to skip that file entirely and not return to it depending on the
order of libraries passed on the linker command line.
This is because these wrapped symbols create linker cycles (libmain_espXX
depends on liblwip but liblwip now also depends on libmain for the wrapped
functions in lwip_patch.c, for example.)
Linker failure for symbols in lwip_patch.c was reproducible if mDNS was
disabled in the board configuration.
This commit adds an explicit undefined symbol for each file, to ensure
the linker will add the wrapped objects on its first pass.
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
For in-tree builds, these are effectively equivalent. However for
out-of-tree builds it's preferable to have as little as possible in the
top-level CMakeLists.txt file (as the out-of-tree build needs its own
copy).
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
This is a workaround for a bug in ESP-IDF where the configuration setting
for maximum active TCP sockets (PCBs) is not applied.
Fixes cases where a lot of short-lived TCP connections can cause:
- Excessive memory usage (unbounded number of sockets in TIME-WAIT).
- Much higher risk of stalled connections due to repeated port numbers. The
maximum number of active TCP PCBs is reduced from 16 to 12 to further
reduce this risk (trade-off against possibility of TIME-WAIT
Assassination as described in RFC1337).
This is not a watertight fix for the second point: a peer can still reuse a
port number while a previous socket is in TIME-WAIT, and LWIP will reject
that connection (in an RFC compliant way) causing the peer to stall.
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
Uses newer TinyUSB synopsys/dwc2 driver for esp32s2 and esp32s3 rather than
the IDF tinyusb component. This allows re-use of other tinyusb integration
code and features shared between ports.
Signed-off-by: Andrew Leech <andrew@alelec.net>
When a fatal error occurs it's important to know which precise version it
occurred on in order to be able to decode the crash dump information such
as the backtrace.
By wrapping around the built-in IDF panic handler we can print some extra
information whenever a fatal error occurs. The message links to a new wiki
page which contains additional information on how to debug ESP32 issues,
and links to the bug reporting issue template.
Signed-off-by: Daniël van de Giessen <daniel@dvdgiessen.nl>
This workaround makes sure that all ringbuf functions that may be called
from an ISR are placed in IRAM. See
https://github.com/espressif/esp-idf/issues/13378
Note that this means that all esp32-og builds get non-ISR ringbuf functions
placed in flash now, whereas previously it was just the spiram variant.
This might be a good thing (e.g. free up some IRAM for native/viper).
Fixes issue #14005.
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
This is a code factoring to have the dict for the machine module in one
location, and all the ports use that same dict. The machine.soft_reset()
function implementation is also factored because it's the same for all
ports that did already implement it. Eventually more functions/bindings
can be factored.
All ports remain functionally the same, except:
- cc3200 port: gains soft_reset, mem8, mem16, mem32, Signal; loses POWER_ON
(which was a legacy constant, replaced long ago by PWRON_RESET)
- nrf port: gains Signal
- qemu-arm port: gains soft_reset
- unix port: gains soft_reset
- zephyr port: gains soft_reset, mem8, mem16, mem32
Signed-off-by: Damien George <damien@micropython.org>
This is a code factoring to have the Python bindings in one location, and
all the ports use those same bindings. At this stage only esp32 implements
this class, so the code for the bindings comes from that port.
The documentation is also updated to reflect the esp32's behaviour of
ADCBlock.connect().
Signed-off-by: Damien George <damien@micropython.org>
ESP32-C3 is not Xtensa-based, so build settings are now tailored a bit
better following that fact. ESP-IDF 5.x already adds architecture-specific
modules by itself so there is no need to specify either the `xtensa` or the
`riscv` module in the build settings.
Signed-off-by: Alessandro Gatti <a.gatti@frob.it>
This is a code factoring to have the Python bindings in one location, and
all the ports use those same bindings. For all ports except the two listed
below there is no functional change.
The nrf port has UART.sendbreak() removed, but this method previously did
nothing.
The zephyr port has the following methods added:
- UART.init(): supports setting timeout and timeout_char.
- UART.deinit(): does nothing, just returns None.
- UART.flush(): raises OSError(EINVAL) because it's not implemented.
- UART.any() and UART.txdone(): raise NotImplementedError.
Signed-off-by: Damien George <damien@micropython.org>
No functional change, just code factoring to have the Python bindings in
one location, and all the ports use those same bindings.
Signed-off-by: Damien George <damien@micropython.org>
This factors the basic top-level I2S class code from the ports into
extmod/machine_i2s.c:
- I2S class definition and method table.
- The init and deinit method wrappers.
- The make_new code.
Further factoring will follow.
Signed-off-by: Damien George <damien@micropython.org>
There are currently 7 ports that implement machine.WDT and a lot of code is
duplicated across these implementations. This commit factors the common
parts of all these implementations to a single location in
extmod/machine_wdt.c. This common code provides the top-level Python
bindings (class and method wrappers), and then each port implements the
back end specific to that port.
With this refactor the ports remain functionally the same except for:
- The esp8266 WDT constructor now takes keyword arguments, and accepts the
"timeout" argument but raises an exception if it's not the default value
(this port doesn't support changing the timeout).
- The mimxrt and samd ports now interpret the argument to WDT.timeout_ms()
as signed and if it's negative truncate it to the minimum timeout (rather
than it being unsigned and a negative value truncating to the maximum
timeout).
Signed-off-by: Damien George <damien@micropython.org>
Some targets like the ESP32-S3 use the IDF Component Manager to provide
additional dependencies to the build. Make sure to include these extra
components when collecting properties used by MicroPython-specific build
steps, like qstr preprocessing.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
This adds named-pins support to the esp32 port, following other ports.
Since the name of esp32 CPU pins is just GPIOx, where x is an integer, the
Pin.cpu dict is not supported and CPU pins are just retrieved via their
existing integer "name" (the cost of adding Pin.cpu is about 800 bytes,
mostly due to the additional qstrs).
What this commit supports is the Pin.board dict and constructing a pin by
names given by a board. These names are defined in a pins.csv file at the
board level. If no such file exists then Pin.board exists but is empty.
As part of this commit, pin and pin IRQ objects are optimised to reduce
their size in flash (by removing their gpio_num_t entry). The net change
in firmware size for this commit is about -132 bytes.
Signed-off-by: Damien George <damien@micropython.org>
This commit updates the esp32 port to work exclusively with ESP-IDF v5.
IDF v5 is needed for some of the newer ESP32 SoCs to work, and it also
cleans up a lot of the inconsistencies between existing SoCs (eg S2, S3,
and C3).
Support for IDF v4 is dropped because it's a lot of effort to maintain both
versions at the same time.
The following components have been verified to work on the various SoCs:
ESP32 ESP32-S2 ESP32-S3 ESP32-C3
build pass pass pass pass
SPIRAM pass pass pass N/A
REPL (UART) pass pass pass pass
REPL (USB) N/A pass pass N/A
filesystem pass pass pass pass
GPIO pass pass pass pass
SPI pass pass pass pass
I2C pass pass pass pass
PWM pass pass pass pass
ADC pass pass pass pass
WiFi STA pass pass pass pass
WiFi AP pass pass pass pass
BLE pass N/A pass pass
ETH pass -- -- --
PPP pass pass pass --
sockets pass pass pass pass
SSL pass ENOMEM pass pass
RMT pass pass pass pass
NeoPixel pass pass pass pass
I2S pass pass pass N/A
ESPNow pass pass pass pass
ULP-FSM pass pass pass N/A
SDCard pass N/A N/A pass
WDT pass pass pass pass
Signed-off-by: Damien George <damien@micropython.org>
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
