Test currently passes. It was added so it can be used to check for
regressions when fixing channel selection for AP mode in a follow-up
commit.
Also add some docs about how channel setting is observed to work for
ESP-NOW.
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
The docs have been authored by many people now. Instead of singling out
individuals in the copyright line, prefer to mention all "MicroPython
authors and contributors".
Individual contributions can still be discovered via the git history.
Signed-off-by: Damien George <damien@micropython.org>
This is currently an implementation detail of MicroPython rather than by
design.
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
Previously individual ports documented these aspects to varying degrees,
but most of the information is common to all ports.
In particular, this adds a canonical explanation of `boot.py` and
`main.py`.
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
The following ports used 65536 as the upper value (100% duty cycle) and are
changed in this commit to use 65535: esp8266, mimxrt, nrf, samd.
Tested that output is high at `duty_u16(65535)` and low at `duty_u16(0)`.
Also verified that at `duty_u16(32768)` the high and low pulse have the
same length.
Partially reverts #10850, commits 9c7ad68165
and 2ac643c15b.
Signed-off-by: robert-hh <robert@hammelrath.com>
This makes the stream that the PPP object wraps, which is normally only set
once via the constructor, accessible and configurable via the
`ppp.config()` method.
Signed-off-by: Daniël van de Giessen <daniel@dvdgiessen.nl>
Removes the deprecated network.[AP|STA]_IF form from the docs.
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
Previously to this commit, running the test suite on a bare-metal board
required specifying the target (really platform) and device, eg:
$ ./run-tests.py --target pyboard --device /dev/ttyACM1
That's quite a lot to type, and you also need to know what the target
platform is, when a lot of the time you either don't care or it doesn't
matter.
This commit makes it easier to run the tests by replacing both of these
options with a single `--test-instance` (`-t` for short) option. That
option specifies the executable/port/device to test. Then the target
platform is automatically detected.
The `--test-instance` can be passed:
- "unix" (the default) to use the unix version of MicroPython
- "webassembly" to test the webassembly port
- anything else is considered a port/device to pass to Pyboard
There are also some shortcuts to specify a port/device, following
`mpremote`:
- a<n> is short for /dev/ttyACM<n>
- u<n> is short for /dev/ttyUSB<n>
- c<n> is short for COM<n>
For example:
$ ./run-tests.py -t a1
Note that the default test instance is "unix" and so this commit does not
change the standard way to run tests on the unix port, by just doing
`./run-tests.py`.
As part of this change, the platform (and it's native architecture if it
supports importing native .mpy files) is show at the start of the test run.
Signed-off-by: Damien George <damien@micropython.org>
Descripton of mip usage with micropython port suggest using it like this:
./micropython -m mip install --target=third-party pkgname
But it should be called without equal sign:
./micropython -m mip install --target third-party pkgname
Signed-off-by: honza.klu@gmail.com
Prior to this commit, when flushing a UART on the rp2 port, it returns just
before the last character is sent out the wire.
Fix this by waiting until the BUSY flag is cleared.
This also fixes the behaviour of `UART.txdone()` to return `True` only when
the last byte has gone out.
Updated docs and tests to match. The test now checks that UART TX time is
very close to the expected time (prior, it was just testing that the TX
time was less than the expected time).
Signed-off-by: Damien George <damien@micropython.org>
Add support for 32 and 48 pin variants of RP2350.
Add new `PIO.gpio_base()` method, mirroring the Pico SDK.
Signed-off-by: Phil Howard <phil@gadgetoid.com>
Signed-off-by: Damien George <damien@micropython.org>
Zephyr v3.7.0 added a new feature to allow getting devices by their
devicetree node labels. Use this feature in the MicroPython Zephyr port
to simplify constructing machine module objects, including Pin, SPI,
I2C, and UART. It's still possible to use the more verbose device names
(e.g., gpio@400ff040, i2c@40066000, spi@4002c000), but now we can also
use their devicetree node labels (e.g., gpiob, i2c0, spi0).
Node labels aren't standardized across all SoC families because they
generally try to follow their respective SoC hardware user manual naming
convention, however many boards define common labels for devices routed
to Arduino headers (e.g., arduino_i2c, arduino_serial, and arduino_spi).
That means I2C("arduino_i2c") will work on quite a few boards (>100 in
the main Zephyr tree).
Signed-off-by: Maureen Helm <maureen.helm@analog.com>
Updates the Zephyr port build instructions and CI to use the latest
Zephyr release tag.
Tested on frdm_k64f.
Signed-off-by: Maureen Helm <maureen.helm@analog.com>
Zephyr v3.2.0 deprecated the devicetree label property as a base
property, which had been used as the device name string for
device_get_binding(). The device name string is now the devicetree node
name appended with its unit-address. Update Zephyr port documentation
to reflect this change.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
This commit adds a new `RingIO` type which exposes the internal ring-buffer
code for general use in Python programs. It has the stream interface
making it similar to `StringIO` and `BytesIO`, except `RingIO` has a fixed
buffer size and is automatically safe when reads and writes are in
different threads or an IRQ.
This new type is enabled at the "extra features" ROM level.
Signed-off-by: Andrew Leech <andrew.leech@planetinnovation.com.au>
Otherwise it's very difficult to reason about thread safety in a
scheduler callback, as it can run at any time on any thread - including
racing against any bytecode operation on any thread.
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
Original commit was by @millosolomillo from 2022, but CI no longer accepts
their auto-generated GitHub commit email...
Signed-off-by: Angus Gratton <angus@redyak.com.au>
Do NOT use `mp_hal_delay_us()` for short delays. This was initially done
to make short delays precise, but it does not allow for scheduling. Leave
using `mp_hal_delay_us()` to user code if needed.
Signed-off-by: robert-hh <robert@hammelrath.com>
These docs now match the code in `extmod/machine_uart.c`. IRQ trigger
support still need to be updated for each port (to be done in a follow-up
commit).
Signed-off-by: Damien George <damien@micropython.org>
By default, the peripheral clock for UART and SPI is set to 48 MHz and will
not be affected by the MCU clock change. This can be changed by a second
argument to `machine.freq(freq, peripheral_freq)`. The second argument
must be either 48 MHz or identical with the first argument.
Note that UART and SPI baud rates may have to be re-configured after
changing the MCU clock.
Signed-off-by: robert-hh <robert@hammelrath.com>
Introduce SRC_USERMOD_LIB_ASM to allow users to include assembly files as
part of their user modules. It could be used to include optimized
functions or outputs of other programming languages.
Signed-off-by: George Hopkins <george-hopkins@null.net>
A lot of existing code (i.e. micropython-lib lps22h, lcd160cr sensor
drivers, lora sync_modem driver, usb-device-hid) calls machine.idle()
inside a tight loop that is polling some condition. This reduces the power
usage compared to constantly looping, but can be faster than calling a
sleep function. However on a tickless port there's not always an interrupt
before the condition they are polling for, so it's difficult to restructure
this code if machine.idle() doesn't have any upper limit on execution time.
This commit specifies an upper limit of 1ms before machine.idle() resumes
execution. This is already the case for all ports except rp2.
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
Fixes and improvements to `int.to_bytes()` are:
- No longer overflows if byte size is 0 (closes#13041).
- Raises OverflowError in any case where number won't fit into byte length
(now matches CPython, previously MicroPython would return a truncated
bytes object).
- Document that `micropython int.to_bytes()` doesn't implement the optional
signed kwarg, but will behave as if `signed=True` when the integer is
negative (this is the current behaviour). Add tests for this also.
Requires changes for small ints, MPZ large ints, and "long long" large
ints.
Adds a new set of unit tests for ints between 32 and 64 bits to increase
coverage of "long long" large ints, which are otherwise untested.
Tested on unix port (64 bit small ints, MPZ long ints) and Zephyr STM32WB
board (32 bit small ints, long long large ints).
This work was funded through GitHub Sponsors.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
MPY files can now hold generated RV32IMC native code. This can be
accomplished by passing the `-march=rv32imc` flag to mpy-cross.
Signed-off-by: Alessandro Gatti <a.gatti@frob.it>
For ESP32C3/S2/S3 IDFv5 exposes new internal temperature API which is
different to the base ESP32, IDFv4.
Thanks to @robert-hh for cleaner code and testing sensor capability in
these devices.
See discussion #10443.
Signed-off-by: Rick Sorensen <rick.sorensen@gmail.com>
In the case where an OUT control transfer triggers with wLength==0 (i.e.
all data sent in the SETUP phase, and no additional data phase) the
callbacks were previously implemented to return b"" (i.e. an empty buffer
for the data phase).
However this didn't actually work as intended because b"" can't provide a
RW buffer (needed for OUT transfers with a data phase to write data into),
so actually the endpoint would stall.
The symptom was often that the device process the request (if processing
it in the SETUP phase when all information was already available), but the
host sees the endpoint stall and eventually returns an error.
This commit changes the behaviour so returning True from the SETUP phase of
a control transfer queues a zero length status response.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
This commit implements the 'e' half-float format: 10-bit mantissa, 5-bit
exponent. It uses native _Float16 if supported by the compiler, otherwise
uses custom bitshifting encoding/decoding routines.
Signed-off-by: Matthias Urlichs <matthias@urlichs.de>
Signed-off-by: Damien George <damien@micropython.org>
