mirror of
https://github.com/micropython/micropython.git
synced 2025-07-21 04:51:12 +02:00
5f058e9863
Some checks failed
JavaScript code lint and formatting with Biome / eslint (push) Has been cancelled
Check code formatting / code-formatting (push) Has been cancelled
Check spelling with codespell / codespell (push) Has been cancelled
Build docs / build (push) Has been cancelled
Check examples / embedding (push) Has been cancelled
Package mpremote / build (push) Has been cancelled
.mpy file format and tools / test (push) Has been cancelled
Build ports metadata / build (push) Has been cancelled
alif port / build_alif (alif_ae3_build) (push) Has been cancelled
cc3200 port / build (push) Has been cancelled
esp32 port / build_idf (esp32_build_cmod_spiram_s2) (push) Has been cancelled
esp32 port / build_idf (esp32_build_s3_c3) (push) Has been cancelled
esp8266 port / build (push) Has been cancelled
mimxrt port / build (push) Has been cancelled
nrf port / build (push) Has been cancelled
powerpc port / build (push) Has been cancelled
qemu port / build_and_test_arm (push) Has been cancelled
qemu port / build_and_test_rv32 (push) Has been cancelled
renesas-ra port / build_renesas_ra_board (push) Has been cancelled
rp2 port / build (push) Has been cancelled
samd port / build (push) Has been cancelled
stm32 port / build_stm32 (stm32_misc_build) (push) Has been cancelled
stm32 port / build_stm32 (stm32_nucleo_build) (push) Has been cancelled
stm32 port / build_stm32 (stm32_pyb_build) (push) Has been cancelled
unix port / minimal (push) Has been cancelled
unix port / reproducible (push) Has been cancelled
unix port / standard (push) Has been cancelled
unix port / standard_v2 (push) Has been cancelled
unix port / coverage (push) Has been cancelled
unix port / coverage_32bit (push) Has been cancelled
unix port / nanbox (push) Has been cancelled
unix port / float (push) Has been cancelled
unix port / stackless_clang (push) Has been cancelled
unix port / float_clang (push) Has been cancelled
unix port / settrace (push) Has been cancelled
unix port / settrace_stackless (push) Has been cancelled
unix port / macos (push) Has been cancelled
unix port / qemu_mips (push) Has been cancelled
unix port / qemu_arm (push) Has been cancelled
unix port / qemu_riscv64 (push) Has been cancelled
webassembly port / build (push) Has been cancelled
windows port / build-vs (Debug, x64, windows-2022, dev, 2022, [17, 18)) (push) Has been cancelled
windows port / build-vs (Debug, x64, windows-latest, dev, 2017, [15, 16)) (push) Has been cancelled
windows port / build-vs (Debug, x86, windows-2022, dev, 2022, [17, 18)) (push) Has been cancelled
windows port / build-vs (Debug, x86, windows-latest, dev, 2017, [15, 16)) (push) Has been cancelled
windows port / build-vs (Release, x64, windows-2019, dev, 2019, [16, 17)) (push) Has been cancelled
windows port / build-vs (Release, x64, windows-2019, standard, 2019, [16, 17)) (push) Has been cancelled
windows port / build-vs (Release, x64, windows-2022, dev, 2022, [17, 18)) (push) Has been cancelled
windows port / build-vs (Release, x64, windows-2022, standard, 2022, [17, 18)) (push) Has been cancelled
windows port / build-vs (Release, x64, windows-latest, dev, 2017, [15, 16)) (push) Has been cancelled
windows port / build-vs (Release, x64, windows-latest, standard, 2017, [15, 16)) (push) Has been cancelled
windows port / build-vs (Release, x86, windows-2019, dev, 2019, [16, 17)) (push) Has been cancelled
windows port / build-vs (Release, x86, windows-2019, standard, 2019, [16, 17)) (push) Has been cancelled
windows port / build-vs (Release, x86, windows-2022, dev, 2022, [17, 18)) (push) Has been cancelled
windows port / build-vs (Release, x86, windows-2022, standard, 2022, [17, 18)) (push) Has been cancelled
windows port / build-vs (Release, x86, windows-latest, dev, 2017, [15, 16)) (push) Has been cancelled
windows port / build-vs (Release, x86, windows-latest, standard, 2017, [15, 16)) (push) Has been cancelled
windows port / build-mingw (i686, mingw32, dev) (push) Has been cancelled
windows port / build-mingw (i686, mingw32, standard) (push) Has been cancelled
windows port / build-mingw (x86_64, mingw64, dev) (push) Has been cancelled
windows port / build-mingw (x86_64, mingw64, standard) (push) Has been cancelled
windows port / cross-build-on-linux (push) Has been cancelled
zephyr port / build (push) Has been cancelled
Python code lint and formatting with ruff / ruff (push) Has been cancelled
This commit updates the ADC to use the new driver `esp_adc/adc_oneshot.h`. There are several errata notes about not being able to change the bit-width of the ADCs certain chips. The only chip that can switch resolution to a lower one is the normal ESP32. ESP32 C2 and S3 are stuck at 12 bits, while S2 is at 13 bits. On the S2, you can change the resolution, but it has no effect on the resolution, rather, it prevents attenuation from working at all! The resolution is set to the maximum possible for each SoC, with the ESP32 being the only one not throwing errors when trying to set the bit-width to 9, 10, 11 or 12 bits using `ADC.width(bits)`. Signed-off-by: Damian Nowacki (purewack) bobimaster15@gmail.com
401 lines
15 KiB
C
401 lines
15 KiB
C
// Options to control how MicroPython is built for this port,
|
|
// overriding defaults in py/mpconfig.h.
|
|
|
|
// Board-specific definitions
|
|
#include "mpconfigboard.h"
|
|
|
|
#include <stdint.h>
|
|
#include <alloca.h>
|
|
#include "esp_random.h"
|
|
#include "esp_system.h"
|
|
#include "freertos/FreeRTOS.h"
|
|
#include "driver/i2s_std.h"
|
|
#include "esp_wifi_types.h"
|
|
|
|
#ifndef MICROPY_CONFIG_ROM_LEVEL
|
|
#define MICROPY_CONFIG_ROM_LEVEL (MICROPY_CONFIG_ROM_LEVEL_EXTRA_FEATURES)
|
|
#endif
|
|
|
|
// object representation and NLR handling
|
|
#define MICROPY_OBJ_REPR (MICROPY_OBJ_REPR_A)
|
|
#if CONFIG_IDF_TARGET_ARCH_XTENSA
|
|
#define MICROPY_NLR_SETJMP (1)
|
|
#endif
|
|
|
|
// memory allocation policies
|
|
#define MICROPY_ALLOC_PATH_MAX (128)
|
|
|
|
// Initial Python heap size. This starts small but adds new heap areas on demand due to
|
|
// the settings MICROPY_GC_SPLIT_HEAP and MICROPY_GC_SPLIT_HEAP_AUTO. The value is
|
|
// different for different MCUs and is chosen so they can grow the heap once (double it)
|
|
// and still have enough internal RAM to start WiFi and make a HTTPS request.
|
|
#ifndef MICROPY_GC_INITIAL_HEAP_SIZE
|
|
#if CONFIG_IDF_TARGET_ESP32
|
|
#define MICROPY_GC_INITIAL_HEAP_SIZE (56 * 1024)
|
|
#elif CONFIG_IDF_TARGET_ESP32S2 && !CONFIG_SPIRAM
|
|
#define MICROPY_GC_INITIAL_HEAP_SIZE (36 * 1024)
|
|
#else
|
|
#define MICROPY_GC_INITIAL_HEAP_SIZE (64 * 1024)
|
|
#endif
|
|
#endif
|
|
|
|
// emitters
|
|
#define MICROPY_PERSISTENT_CODE_LOAD (1)
|
|
#if CONFIG_IDF_TARGET_ARCH_RISCV
|
|
#if CONFIG_ESP_SYSTEM_PMP_IDRAM_SPLIT
|
|
#define MICROPY_EMIT_RV32 (0)
|
|
#else
|
|
#define MICROPY_EMIT_RV32 (1)
|
|
#endif
|
|
#else
|
|
#define MICROPY_EMIT_XTENSAWIN (1)
|
|
#endif
|
|
|
|
// optimisations
|
|
#ifndef MICROPY_OPT_COMPUTED_GOTO
|
|
#define MICROPY_OPT_COMPUTED_GOTO (1)
|
|
#endif
|
|
|
|
// Python internal features
|
|
#define MICROPY_READER_VFS (1)
|
|
#define MICROPY_ENABLE_GC (1)
|
|
#define MICROPY_STACK_CHECK_MARGIN (1024)
|
|
#define MICROPY_ENABLE_EMERGENCY_EXCEPTION_BUF (1)
|
|
#define MICROPY_LONGINT_IMPL (MICROPY_LONGINT_IMPL_MPZ)
|
|
#define MICROPY_ERROR_REPORTING (MICROPY_ERROR_REPORTING_NORMAL) // Debugging Note: Increase the error reporting level to view
|
|
// __FUNCTION__, __LINE__, __FILE__ in check_esp_err() exceptions
|
|
#define MICROPY_WARNINGS (1)
|
|
#define MICROPY_FLOAT_IMPL (MICROPY_FLOAT_IMPL_FLOAT)
|
|
#define MICROPY_STREAMS_POSIX_API (1)
|
|
#define MICROPY_USE_INTERNAL_ERRNO (0) // errno.h from xtensa-esp32-elf/sys-include/sys
|
|
#define MICROPY_USE_INTERNAL_PRINTF (0) // ESP32 SDK requires its own printf
|
|
#define MICROPY_SCHEDULER_DEPTH (8)
|
|
#define MICROPY_VFS (1)
|
|
|
|
// control over Python builtins
|
|
#define MICROPY_PY_STR_BYTES_CMP_WARN (1)
|
|
#define MICROPY_PY_ALL_INPLACE_SPECIAL_METHODS (1)
|
|
#define MICROPY_PY_BUILTINS_HELP_TEXT esp32_help_text
|
|
#define MICROPY_PY_IO_BUFFEREDWRITER (1)
|
|
#define MICROPY_PY_TIME_GMTIME_LOCALTIME_MKTIME (1)
|
|
#define MICROPY_PY_TIME_TIME_TIME_NS (1)
|
|
#define MICROPY_PY_TIME_INCLUDEFILE "ports/esp32/modtime.c"
|
|
#define MICROPY_PY_THREAD (1)
|
|
#define MICROPY_PY_THREAD_GIL (1)
|
|
#define MICROPY_PY_THREAD_GIL_VM_DIVISOR (32)
|
|
|
|
#define MICROPY_GC_SPLIT_HEAP (1)
|
|
#define MICROPY_GC_SPLIT_HEAP_AUTO (1)
|
|
|
|
// extended modules
|
|
#ifndef MICROPY_PY_ESPNOW
|
|
#define MICROPY_PY_ESPNOW (1)
|
|
#endif
|
|
#ifndef MICROPY_PY_BLUETOOTH
|
|
#define MICROPY_PY_BLUETOOTH (1)
|
|
#define MICROPY_PY_BLUETOOTH_USE_SYNC_EVENTS (1)
|
|
#define MICROPY_PY_BLUETOOTH_USE_SYNC_EVENTS_WITH_INTERLOCK (1)
|
|
// Event stack size is the RTOS stack size minus an allowance for the stack used
|
|
// by the NimBLE functions that call into invoke_irq_handler().
|
|
// MICROPY_STACK_CHECK_MARGIN is further subtracted from this value to set the stack limit.
|
|
#define MICROPY_PY_BLUETOOTH_SYNC_EVENT_STACK_SIZE (CONFIG_BT_NIMBLE_TASK_STACK_SIZE - 1024)
|
|
#define MICROPY_PY_BLUETOOTH_ENABLE_CENTRAL_MODE (1)
|
|
#define MICROPY_PY_BLUETOOTH_ENABLE_PAIRING_BONDING (1)
|
|
#define MICROPY_BLUETOOTH_NIMBLE (1)
|
|
#define MICROPY_BLUETOOTH_NIMBLE_BINDINGS_ONLY (1)
|
|
#endif
|
|
#define MICROPY_PY_HASHLIB_MD5 (1)
|
|
#define MICROPY_PY_HASHLIB_SHA1 (1)
|
|
#define MICROPY_PY_HASHLIB_SHA256 (1)
|
|
#define MICROPY_PY_CRYPTOLIB (1)
|
|
#define MICROPY_PY_RANDOM_SEED_INIT_FUNC (esp_random())
|
|
#define MICROPY_PY_OS_INCLUDEFILE "ports/esp32/modos.c"
|
|
#define MICROPY_PY_OS_DUPTERM (1)
|
|
#define MICROPY_PY_OS_DUPTERM_NOTIFY (1)
|
|
#define MICROPY_PY_OS_SYNC (1)
|
|
#define MICROPY_PY_OS_UNAME (1)
|
|
#define MICROPY_PY_OS_URANDOM (1)
|
|
#define MICROPY_PY_MACHINE (1)
|
|
#define MICROPY_PY_MACHINE_INCLUDEFILE "ports/esp32/modmachine.c"
|
|
#define MICROPY_PY_MACHINE_RESET (1)
|
|
#define MICROPY_PY_MACHINE_BARE_METAL_FUNCS (1)
|
|
#define MICROPY_PY_MACHINE_DISABLE_IRQ_ENABLE_IRQ (1)
|
|
#define MICROPY_PY_MACHINE_ADC (1)
|
|
#define MICROPY_PY_MACHINE_ADC_INCLUDEFILE "ports/esp32/machine_adc.c"
|
|
#define MICROPY_PY_MACHINE_ADC_ATTEN_WIDTH (1)
|
|
#define MICROPY_PY_MACHINE_ADC_INIT (1)
|
|
#define MICROPY_PY_MACHINE_ADC_DEINIT (1)
|
|
#define MICROPY_PY_MACHINE_ADC_READ (1)
|
|
#define MICROPY_PY_MACHINE_ADC_READ_UV (1)
|
|
#define MICROPY_PY_MACHINE_ADC_BLOCK (1)
|
|
#define MICROPY_PY_MACHINE_ADC_BLOCK_INCLUDEFILE "ports/esp32/machine_adc_block.c"
|
|
#define MICROPY_PY_MACHINE_PIN_MAKE_NEW mp_pin_make_new
|
|
#define MICROPY_PY_MACHINE_BITSTREAM (1)
|
|
#define MICROPY_PY_MACHINE_DHT_READINTO (1)
|
|
#define MICROPY_PY_MACHINE_PULSE (1)
|
|
#define MICROPY_PY_MACHINE_PWM (1)
|
|
#define MICROPY_PY_MACHINE_PWM_DUTY (1)
|
|
#define MICROPY_PY_MACHINE_PWM_INCLUDEFILE "ports/esp32/machine_pwm.c"
|
|
#define MICROPY_PY_MACHINE_I2C (1)
|
|
#define MICROPY_PY_MACHINE_I2C_TRANSFER_WRITE1 (1)
|
|
#define MICROPY_PY_MACHINE_SOFTI2C (1)
|
|
#define MICROPY_PY_MACHINE_SPI (1)
|
|
#define MICROPY_PY_MACHINE_SOFTSPI (1)
|
|
#ifndef MICROPY_PY_MACHINE_DAC
|
|
#define MICROPY_PY_MACHINE_DAC (SOC_DAC_SUPPORTED)
|
|
#endif
|
|
#ifndef MICROPY_PY_MACHINE_I2S
|
|
#define MICROPY_PY_MACHINE_I2S (SOC_I2S_SUPPORTED)
|
|
#endif
|
|
#define MICROPY_PY_MACHINE_I2S_INCLUDEFILE "ports/esp32/machine_i2s.c"
|
|
#define MICROPY_PY_MACHINE_I2S_FINALISER (1)
|
|
#define MICROPY_PY_MACHINE_I2S_CONSTANT_RX (I2S_DIR_RX)
|
|
#define MICROPY_PY_MACHINE_I2S_CONSTANT_TX (I2S_DIR_TX)
|
|
#define MICROPY_PY_MACHINE_UART (1)
|
|
#define MICROPY_PY_MACHINE_UART_INCLUDEFILE "ports/esp32/machine_uart.c"
|
|
#define MICROPY_PY_MACHINE_UART_SENDBREAK (1)
|
|
#define MICROPY_PY_MACHINE_UART_IRQ (1)
|
|
#define MICROPY_PY_MACHINE_WDT (1)
|
|
#define MICROPY_PY_MACHINE_WDT_INCLUDEFILE "ports/esp32/machine_wdt.c"
|
|
#define MICROPY_PY_NETWORK (1)
|
|
#ifndef MICROPY_PY_NETWORK_HOSTNAME_DEFAULT
|
|
#if CONFIG_IDF_TARGET_ESP32
|
|
#define MICROPY_PY_NETWORK_HOSTNAME_DEFAULT "mpy-esp32"
|
|
#elif CONFIG_IDF_TARGET_ESP32S2
|
|
#define MICROPY_PY_NETWORK_HOSTNAME_DEFAULT "mpy-esp32s2"
|
|
#elif CONFIG_IDF_TARGET_ESP32S3
|
|
#define MICROPY_PY_NETWORK_HOSTNAME_DEFAULT "mpy-esp32s3"
|
|
#elif CONFIG_IDF_TARGET_ESP32C3
|
|
#define MICROPY_PY_NETWORK_HOSTNAME_DEFAULT "mpy-esp32c3"
|
|
#elif CONFIG_IDF_TARGET_ESP32C6
|
|
#define MICROPY_PY_NETWORK_HOSTNAME_DEFAULT "mpy-esp32c6"
|
|
#endif
|
|
#endif
|
|
#define MICROPY_PY_NETWORK_INCLUDEFILE "ports/esp32/modnetwork.h"
|
|
#define MICROPY_PY_NETWORK_MODULE_GLOBALS_INCLUDEFILE "ports/esp32/modnetwork_globals.h"
|
|
#ifndef MICROPY_PY_NETWORK_WLAN
|
|
#define MICROPY_PY_NETWORK_WLAN (1)
|
|
#endif
|
|
#ifndef MICROPY_HW_ENABLE_SDCARD
|
|
#define MICROPY_HW_ENABLE_SDCARD (1)
|
|
#endif
|
|
#define MICROPY_HW_SOFTSPI_MIN_DELAY (0)
|
|
#define MICROPY_HW_SOFTSPI_MAX_BAUDRATE (esp_rom_get_cpu_ticks_per_us() * 1000000 / 200) // roughly
|
|
#define MICROPY_PY_SSL (1)
|
|
#define MICROPY_SSL_MBEDTLS (1)
|
|
#define MICROPY_PY_WEBSOCKET (1)
|
|
#define MICROPY_PY_WEBREPL (1)
|
|
#define MICROPY_PY_ONEWIRE (1)
|
|
#define MICROPY_PY_SOCKET_EVENTS (MICROPY_PY_WEBREPL)
|
|
#define MICROPY_PY_BLUETOOTH_RANDOM_ADDR (1)
|
|
|
|
// fatfs configuration
|
|
#define MICROPY_FATFS_ENABLE_LFN (1)
|
|
#define MICROPY_FATFS_RPATH (2)
|
|
#define MICROPY_FATFS_MAX_SS (4096)
|
|
#define MICROPY_FATFS_LFN_CODE_PAGE 437 /* 1=SFN/ANSI 437=LFN/U.S.(OEM) */
|
|
|
|
// task size
|
|
#ifndef MICROPY_TASK_STACK_SIZE
|
|
#define MICROPY_TASK_STACK_SIZE (16 * 1024)
|
|
#endif
|
|
|
|
#define MP_STATE_PORT MP_STATE_VM
|
|
|
|
#ifndef MICROPY_HW_ENABLE_USBDEV
|
|
#define MICROPY_HW_ENABLE_USBDEV (SOC_USB_OTG_SUPPORTED)
|
|
#endif
|
|
|
|
#if MICROPY_HW_ENABLE_USBDEV
|
|
#define MICROPY_SCHEDULER_STATIC_NODES (1)
|
|
#define MICROPY_HW_USB_CDC_DTR_RTS_BOOTLOADER (1)
|
|
|
|
#ifndef MICROPY_HW_USB_VID
|
|
#define USB_ESPRESSIF_VID 0x303A
|
|
#if CONFIG_TINYUSB_DESC_USE_ESPRESSIF_VID
|
|
#define MICROPY_HW_USB_VID (USB_ESPRESSIF_VID)
|
|
#else
|
|
#define MICROPY_HW_USB_VID (CONFIG_TINYUSB_DESC_CUSTOM_VID)
|
|
#endif
|
|
|
|
#ifndef MICROPY_HW_ENABLE_USB_RUNTIME_DEVICE
|
|
#define MICROPY_HW_ENABLE_USB_RUNTIME_DEVICE (1) // Support machine.USBDevice
|
|
#endif
|
|
#endif
|
|
|
|
#ifndef MICROPY_HW_USB_PID
|
|
#if CONFIG_TINYUSB_DESC_USE_DEFAULT_PID
|
|
#define _PID_MAP(itf, n) ((CFG_TUD_##itf) << (n))
|
|
// A combination of interfaces must have a unique product id, since PC will save device driver after the first plug.
|
|
// Same VID/PID with different interface e.g MSC (first), then CDC (later) will possibly cause system error on PC.
|
|
// Auto ProductID layout's Bitmap:
|
|
// [MSB] HID | MSC | CDC [LSB]
|
|
#define USB_TUSB_PID (0x4000 | _PID_MAP(CDC, 0) | _PID_MAP(MSC, 1) | _PID_MAP(HID, 2) | \
|
|
_PID_MAP(MIDI, 3)) // | _PID_MAP(AUDIO, 4) | _PID_MAP(VENDOR, 5) )
|
|
#define MICROPY_HW_USB_PID (USB_TUSB_PID)
|
|
#else
|
|
#define MICROPY_HW_USB_PID (CONFIG_TINYUSB_DESC_CUSTOM_PID)
|
|
#endif
|
|
#endif
|
|
|
|
#ifndef MICROPY_HW_USB_MANUFACTURER_STRING
|
|
#ifdef CONFIG_TINYUSB_DESC_MANUFACTURER_STRING
|
|
#define MICROPY_HW_USB_MANUFACTURER_STRING CONFIG_TINYUSB_DESC_MANUFACTURER_STRING
|
|
#else
|
|
#define MICROPY_HW_USB_MANUFACTURER_STRING "MicroPython"
|
|
#endif
|
|
#endif
|
|
|
|
#ifndef MICROPY_HW_USB_PRODUCT_FS_STRING
|
|
#ifdef CONFIG_TINYUSB_DESC_PRODUCT_STRING
|
|
#define MICROPY_HW_USB_PRODUCT_FS_STRING CONFIG_TINYUSB_DESC_PRODUCT_STRING
|
|
#else
|
|
#define MICROPY_HW_USB_PRODUCT_FS_STRING "Board in FS mode"
|
|
#endif
|
|
#endif
|
|
|
|
#endif // MICROPY_HW_ENABLE_USBDEV
|
|
|
|
// Enable stdio over native USB peripheral CDC via TinyUSB
|
|
#ifndef MICROPY_HW_USB_CDC
|
|
#define MICROPY_HW_USB_CDC (MICROPY_HW_ENABLE_USBDEV)
|
|
#endif
|
|
|
|
// Enable stdio over USB Serial/JTAG peripheral
|
|
#ifndef MICROPY_HW_ESP_USB_SERIAL_JTAG
|
|
#define MICROPY_HW_ESP_USB_SERIAL_JTAG (SOC_USB_SERIAL_JTAG_SUPPORTED && !MICROPY_HW_USB_CDC)
|
|
#endif
|
|
|
|
#if MICROPY_HW_USB_CDC && MICROPY_HW_ESP_USB_SERIAL_JTAG
|
|
#error "Invalid build config: Can't enable both native USB and USB Serial/JTAG peripheral"
|
|
#endif
|
|
|
|
// type definitions for the specific machine
|
|
|
|
#define MICROPY_MAKE_POINTER_CALLABLE(p) ((void *)((mp_uint_t)(p)))
|
|
#if SOC_CPU_IDRAM_SPLIT_USING_PMP && !CONFIG_ESP_SYSTEM_PMP_IDRAM_SPLIT
|
|
// On targets with this configuration all RAM is executable so no need for a custom commit function.
|
|
#else
|
|
void *esp_native_code_commit(void *, size_t, void *);
|
|
#define MP_PLAT_COMMIT_EXEC(buf, len, reloc) esp_native_code_commit(buf, len, reloc)
|
|
#endif
|
|
#define MP_SSIZE_MAX (0x7fffffff)
|
|
|
|
#if MICROPY_PY_SOCKET_EVENTS
|
|
#define MICROPY_PY_SOCKET_EVENTS_HANDLER extern void socket_events_handler(void); socket_events_handler();
|
|
#else
|
|
#define MICROPY_PY_SOCKET_EVENTS_HANDLER
|
|
#endif
|
|
|
|
#if MICROPY_PY_THREAD
|
|
#define MICROPY_EVENT_POLL_HOOK \
|
|
do { \
|
|
extern void mp_handle_pending(bool); \
|
|
mp_handle_pending(true); \
|
|
MICROPY_PY_SOCKET_EVENTS_HANDLER \
|
|
MP_THREAD_GIL_EXIT(); \
|
|
ulTaskNotifyTake(pdFALSE, 1); \
|
|
MP_THREAD_GIL_ENTER(); \
|
|
} while (0);
|
|
#else
|
|
#if CONFIG_IDF_TARGET_ARCH_RISCV
|
|
#define MICROPY_PY_WAIT_FOR_INTERRUPT asm volatile ("wfi\n")
|
|
#else
|
|
#define MICROPY_PY_WAIT_FOR_INTERRUPT asm volatile ("waiti 0\n")
|
|
#endif
|
|
#define MICROPY_EVENT_POLL_HOOK \
|
|
do { \
|
|
extern void mp_handle_pending(bool); \
|
|
mp_handle_pending(true); \
|
|
MICROPY_PY_SOCKET_EVENTS_HANDLER \
|
|
MICROPY_PY_WAIT_FOR_INTERRUPT; \
|
|
} while (0);
|
|
#endif
|
|
|
|
// Functions that should go in IRAM
|
|
// For ESP32 with SPIRAM workaround, firmware is larger and uses more static IRAM,
|
|
// so in that configuration don't put too many functions in IRAM.
|
|
#if !(CONFIG_IDF_TARGET_ESP32 && CONFIG_SPIRAM && CONFIG_SPIRAM_CACHE_WORKAROUND)
|
|
#define MICROPY_WRAP_MP_BINARY_OP(f) IRAM_ATTR f
|
|
#endif
|
|
#define MICROPY_WRAP_MP_EXECUTE_BYTECODE(f) IRAM_ATTR f
|
|
#define MICROPY_WRAP_MP_LOAD_GLOBAL(f) IRAM_ATTR f
|
|
#define MICROPY_WRAP_MP_LOAD_NAME(f) IRAM_ATTR f
|
|
#define MICROPY_WRAP_MP_MAP_LOOKUP(f) IRAM_ATTR f
|
|
#define MICROPY_WRAP_MP_OBJ_GET_TYPE(f) IRAM_ATTR f
|
|
#define MICROPY_WRAP_MP_SCHED_EXCEPTION(f) IRAM_ATTR f
|
|
#define MICROPY_WRAP_MP_SCHED_KEYBOARD_INTERRUPT(f) IRAM_ATTR f
|
|
|
|
#define UINT_FMT "%u"
|
|
#define INT_FMT "%d"
|
|
|
|
typedef int32_t mp_int_t; // must be pointer size
|
|
typedef uint32_t mp_uint_t; // must be pointer size
|
|
typedef long mp_off_t;
|
|
// ssize_t, off_t as required by POSIX-signatured functions in stream.h
|
|
#include <sys/types.h>
|
|
|
|
// board specifics
|
|
#define MICROPY_PY_SYS_PLATFORM "esp32"
|
|
|
|
// ESP32-S3 extended IO for 47 & 48
|
|
#ifndef MICROPY_HW_ESP32S3_EXTENDED_IO
|
|
#define MICROPY_HW_ESP32S3_EXTENDED_IO (1)
|
|
#endif
|
|
|
|
#ifndef MICROPY_HW_ENABLE_MDNS_QUERIES
|
|
#define MICROPY_HW_ENABLE_MDNS_QUERIES (1)
|
|
#endif
|
|
|
|
#ifndef MICROPY_HW_ENABLE_MDNS_RESPONDER
|
|
#define MICROPY_HW_ENABLE_MDNS_RESPONDER (1)
|
|
#endif
|
|
|
|
#ifndef MICROPY_BOARD_ENTER_BOOTLOADER
|
|
// RTC has a register to trigger bootloader on these targets
|
|
#if CONFIG_IDF_TARGET_ESP32S2 || CONFIG_IDF_TARGET_ESP32S3 || CONFIG_IDF_TARGET_ESP32C2 || CONFIG_IDF_TARGET_ESP32C3
|
|
#define MICROPY_ESP32_USE_BOOTLOADER_RTC (1)
|
|
#define MICROPY_BOARD_ENTER_BOOTLOADER(nargs, args) machine_bootloader_rtc()
|
|
#endif
|
|
#endif
|
|
|
|
#ifdef MICROPY_BOARD_ENTER_BOOTLOADER
|
|
#define MICROPY_PY_MACHINE_BOOTLOADER (1)
|
|
#else
|
|
#define MICROPY_PY_MACHINE_BOOTLOADER (0)
|
|
#endif
|
|
|
|
// Workaround for upstream bug https://github.com/espressif/esp-idf/issues/14273
|
|
// Can be removed if a fix is available in supported ESP-IDF versions.
|
|
#define MICROPY_PY_MATH_GAMMA_FIX_NEGINF (1)
|
|
|
|
#ifndef MICROPY_BOARD_STARTUP
|
|
#define MICROPY_BOARD_STARTUP boardctrl_startup
|
|
#endif
|
|
|
|
void boardctrl_startup(void);
|
|
|
|
#ifndef MICROPY_PY_NETWORK_LAN
|
|
#if CONFIG_IDF_TARGET_ESP32 || (CONFIG_ETH_USE_SPI_ETHERNET && (CONFIG_ETH_SPI_ETHERNET_KSZ8851SNL || CONFIG_ETH_SPI_ETHERNET_DM9051 || CONFIG_ETH_SPI_ETHERNET_W5500))
|
|
#define MICROPY_PY_NETWORK_LAN (1)
|
|
#else
|
|
#define MICROPY_PY_NETWORK_LAN (0)
|
|
#endif
|
|
#endif
|
|
|
|
#if MICROPY_PY_NETWORK_LAN && CONFIG_ETH_USE_SPI_ETHERNET
|
|
#ifndef MICROPY_PY_NETWORK_LAN_SPI_CLOCK_SPEED_MZ
|
|
#define MICROPY_PY_NETWORK_LAN_SPI_CLOCK_SPEED_MZ (20)
|
|
#endif
|
|
#endif
|
|
|
|
// The minimum string length threshold for string printing to stdout operations to be GIL-aware.
|
|
#ifndef MICROPY_PY_STRING_TX_GIL_THRESHOLD
|
|
#define MICROPY_PY_STRING_TX_GIL_THRESHOLD (20)
|
|
#endif
|
|
|
|
// Code can override this to provide a custom ESP-IDF entry point.
|
|
#ifndef MICROPY_ESP_IDF_ENTRY
|
|
#define MICROPY_ESP_IDF_ENTRY app_main
|
|
#endif
|