mirror of
https://github.com/micropython/micropython.git
synced 2025-07-21 13:01:10 +02:00
b8e56a17b1
This commit takes the QEMU/Arm CI build and test step and splits it into three separate steps (bigendian, sabrelite, thumb), to allow them to run in parallel. Currently the QEMU/Arm CI build step would take up to 16 minutes, often being the last step blocking a full test run. With this commit, when the steps run in parallel the time it takes to complete the QEMU/Arm build and test procedure is cut in half - taking between 8 to 9 minutes depending on the CI runner load. The existing `ci_build_and_test_arm` function has been removed, in favour of having three separate functions - one per configuration. They are called `ci_build_and_test_arm_bigendian`, `ci_build_and_test_arm_sabrelite`, and `ci_build_and_test_arm_thumb`. Signed-off-by: Alessandro Gatti <a.gatti@frob.it>
894 lines
30 KiB
Bash
Executable File
894 lines
30 KiB
Bash
Executable File
#!/bin/bash
|
|
|
|
if which nproc > /dev/null; then
|
|
MAKEOPTS="-j$(nproc)"
|
|
else
|
|
MAKEOPTS="-j$(sysctl -n hw.ncpu)"
|
|
fi
|
|
|
|
# Ensure known OPEN_MAX (NO_FILES) limit.
|
|
ulimit -n 1024
|
|
|
|
########################################################################################
|
|
# general helper functions
|
|
|
|
function ci_gcc_arm_setup {
|
|
sudo apt-get install gcc-arm-none-eabi libnewlib-arm-none-eabi
|
|
arm-none-eabi-gcc --version
|
|
}
|
|
|
|
function ci_gcc_riscv_setup {
|
|
sudo apt-get install gcc-riscv64-unknown-elf picolibc-riscv64-unknown-elf
|
|
riscv64-unknown-elf-gcc --version
|
|
}
|
|
|
|
function ci_picotool_setup {
|
|
# Manually installing picotool ensures we use a release version, and speeds up the build.
|
|
git clone https://github.com/raspberrypi/pico-sdk.git
|
|
(cd pico-sdk && git submodule update --init lib/mbedtls)
|
|
git clone https://github.com/raspberrypi/picotool.git
|
|
(cd picotool && mkdir build && cd build && cmake -DPICO_SDK_PATH=../../pico-sdk .. && make && sudo make install)
|
|
picotool version
|
|
}
|
|
|
|
########################################################################################
|
|
# c code formatting
|
|
|
|
function ci_c_code_formatting_setup {
|
|
sudo apt-get install uncrustify
|
|
uncrustify --version
|
|
}
|
|
|
|
function ci_c_code_formatting_run {
|
|
# Only run on C files. The ruff rule runs separately on Python.
|
|
tools/codeformat.py -v -c
|
|
}
|
|
|
|
########################################################################################
|
|
# commit formatting
|
|
|
|
function ci_commit_formatting_run {
|
|
# Default GitHub Actions checkout for a PR is a generated merge commit where
|
|
# the parents are the head of base branch (i.e. master) and the head of the
|
|
# PR branch, respectively. Use these parents to find the merge-base (i.e.
|
|
# where the PR branch head was branched)
|
|
|
|
# If the common ancestor commit hasn't been found, fetch more.
|
|
git merge-base HEAD^1 HEAD^2 || git fetch --unshallow origin
|
|
|
|
MERGE_BASE=$(git merge-base HEAD^1 HEAD^2)
|
|
HEAD=$(git rev-parse HEAD^2)
|
|
echo "Checking commits between merge base ${MERGE_BASE} and PR head ${HEAD}..."
|
|
tools/verifygitlog.py -v "${MERGE_BASE}..${HEAD}"
|
|
}
|
|
|
|
########################################################################################
|
|
# code size
|
|
|
|
function ci_code_size_setup {
|
|
sudo apt-get update
|
|
sudo apt-get install gcc-multilib
|
|
gcc --version
|
|
ci_gcc_arm_setup
|
|
ci_gcc_riscv_setup
|
|
ci_picotool_setup
|
|
}
|
|
|
|
function ci_code_size_build {
|
|
# check the following ports for the change in their code size
|
|
PORTS_TO_CHECK=bmusxpdv
|
|
SUBMODULES="lib/asf4 lib/berkeley-db-1.xx lib/btstack lib/cyw43-driver lib/lwip lib/mbedtls lib/micropython-lib lib/nxp_driver lib/pico-sdk lib/stm32lib lib/tinyusb"
|
|
|
|
# Default GitHub pull request sets HEAD to a generated merge commit
|
|
# between PR branch (HEAD^2) and base branch (i.e. master) (HEAD^1).
|
|
#
|
|
# We want to compare this generated commit with the base branch, to see what
|
|
# the code size impact would be if we merged this PR.
|
|
REFERENCE=$(git rev-parse --short HEAD^1)
|
|
COMPARISON=$(git rev-parse --short HEAD)
|
|
|
|
echo "Comparing sizes of reference ${REFERENCE} to ${COMPARISON}..."
|
|
git log --oneline $REFERENCE..$COMPARISON
|
|
|
|
function code_size_build_step {
|
|
COMMIT=$1
|
|
OUTFILE=$2
|
|
|
|
echo "Building ${COMMIT}..."
|
|
git checkout --detach $COMMIT
|
|
git submodule update --init $SUBMODULES
|
|
git show -s
|
|
tools/metrics.py clean $PORTS_TO_CHECK
|
|
tools/metrics.py build $PORTS_TO_CHECK | tee $OUTFILE
|
|
return $?
|
|
}
|
|
|
|
# Allow errors from tools/metrics.py to propagate out of the pipe above.
|
|
set -o pipefail
|
|
|
|
# build reference, save to size0
|
|
# ignore any errors with this build, in case master is failing
|
|
code_size_build_step $REFERENCE ~/size0
|
|
# build PR/branch, save to size1
|
|
code_size_build_step $COMPARISON ~/size1
|
|
STATUS=$?
|
|
|
|
set +o pipefail
|
|
unset -f code_size_build_step
|
|
|
|
return $STATUS
|
|
}
|
|
|
|
########################################################################################
|
|
# .mpy file format
|
|
|
|
function ci_mpy_format_setup {
|
|
sudo apt-get update
|
|
sudo apt-get install python2.7
|
|
sudo pip3 install pyelftools
|
|
python2.7 --version
|
|
python3 --version
|
|
}
|
|
|
|
function ci_mpy_format_test {
|
|
# Test mpy-tool.py dump feature on bytecode
|
|
python2.7 ./tools/mpy-tool.py -xd tests/frozen/frozentest.mpy
|
|
python3 ./tools/mpy-tool.py -xd tests/frozen/frozentest.mpy
|
|
|
|
# Build MicroPython
|
|
ci_unix_standard_build
|
|
micropython=./ports/unix/build-standard/micropython
|
|
$micropython -m mip install --target . argparse __future__
|
|
export MICROPYPATH=.
|
|
|
|
# Test mpy-tool.py running under MicroPython
|
|
$micropython ./tools/mpy-tool.py -x -d tests/frozen/frozentest.mpy
|
|
|
|
# Test mpy-tool.py dump feature on native code
|
|
make -C examples/natmod/features1
|
|
./tools/mpy-tool.py -xd examples/natmod/features1/features1.mpy
|
|
$micropython ./tools/mpy-tool.py -x -d examples/natmod/features1/features1.mpy
|
|
}
|
|
|
|
########################################################################################
|
|
# ports/cc3200
|
|
|
|
function ci_cc3200_setup {
|
|
ci_gcc_arm_setup
|
|
}
|
|
|
|
function ci_cc3200_build {
|
|
make ${MAKEOPTS} -C ports/cc3200 BTARGET=application BTYPE=release
|
|
make ${MAKEOPTS} -C ports/cc3200 BTARGET=bootloader BTYPE=release
|
|
}
|
|
|
|
########################################################################################
|
|
# ports/esp32
|
|
|
|
# GitHub tag of ESP-IDF to use for CI (note: must be a tag or a branch)
|
|
IDF_VER=v5.4.1
|
|
PYTHON=$(command -v python3 2> /dev/null)
|
|
PYTHON_VER=$(${PYTHON:-python} --version | cut -d' ' -f2)
|
|
|
|
export IDF_CCACHE_ENABLE=1
|
|
|
|
function ci_esp32_idf_setup {
|
|
git clone --depth 1 --branch $IDF_VER https://github.com/espressif/esp-idf.git
|
|
# doing a treeless clone isn't quite as good as --shallow-submodules, but it
|
|
# is smaller than full clones and works when the submodule commit isn't a head.
|
|
git -C esp-idf submodule update --init --recursive --filter=tree:0
|
|
./esp-idf/install.sh
|
|
# Install additional packages for mpy_ld into the IDF env
|
|
source esp-idf/export.sh
|
|
pip3 install pyelftools
|
|
pip3 install ar
|
|
}
|
|
|
|
function ci_esp32_build_common {
|
|
source esp-idf/export.sh
|
|
make ${MAKEOPTS} -C mpy-cross
|
|
make ${MAKEOPTS} -C ports/esp32 submodules
|
|
}
|
|
|
|
function ci_esp32_build_cmod_spiram_s2 {
|
|
ci_esp32_build_common
|
|
|
|
make ${MAKEOPTS} -C ports/esp32 \
|
|
USER_C_MODULES=../../../examples/usercmodule/micropython.cmake \
|
|
FROZEN_MANIFEST=$(pwd)/ports/esp32/boards/manifest_test.py
|
|
|
|
# Test building native .mpy with xtensawin architecture.
|
|
ci_native_mpy_modules_build xtensawin
|
|
|
|
make ${MAKEOPTS} -C ports/esp32 BOARD=ESP32_GENERIC BOARD_VARIANT=SPIRAM
|
|
make ${MAKEOPTS} -C ports/esp32 BOARD=ESP32_GENERIC_S2
|
|
}
|
|
|
|
function ci_esp32_build_s3_c3 {
|
|
ci_esp32_build_common
|
|
|
|
make ${MAKEOPTS} -C ports/esp32 BOARD=ESP32_GENERIC_S3
|
|
make ${MAKEOPTS} -C ports/esp32 BOARD=ESP32_GENERIC_C3
|
|
}
|
|
|
|
########################################################################################
|
|
# ports/esp8266
|
|
|
|
function ci_esp8266_setup {
|
|
sudo pip3 install pyserial esptool==3.3.1 pyelftools ar
|
|
wget https://micropython.org/resources/xtensa-lx106-elf-standalone.tar.gz
|
|
zcat xtensa-lx106-elf-standalone.tar.gz | tar x
|
|
# Remove this esptool.py so pip version is used instead
|
|
rm xtensa-lx106-elf/bin/esptool.py
|
|
}
|
|
|
|
function ci_esp8266_path {
|
|
echo $(pwd)/xtensa-lx106-elf/bin
|
|
}
|
|
|
|
function ci_esp8266_build {
|
|
make ${MAKEOPTS} -C mpy-cross
|
|
make ${MAKEOPTS} -C ports/esp8266 submodules
|
|
make ${MAKEOPTS} -C ports/esp8266 BOARD=ESP8266_GENERIC
|
|
make ${MAKEOPTS} -C ports/esp8266 BOARD=ESP8266_GENERIC BOARD_VARIANT=FLASH_512K
|
|
make ${MAKEOPTS} -C ports/esp8266 BOARD=ESP8266_GENERIC BOARD_VARIANT=FLASH_1M
|
|
|
|
# Test building native .mpy with xtensa architecture.
|
|
ci_native_mpy_modules_build xtensa
|
|
}
|
|
|
|
########################################################################################
|
|
# ports/webassembly
|
|
|
|
function ci_webassembly_setup {
|
|
npm install terser
|
|
git clone https://github.com/emscripten-core/emsdk.git
|
|
(cd emsdk && ./emsdk install latest && ./emsdk activate latest)
|
|
}
|
|
|
|
function ci_webassembly_build {
|
|
source emsdk/emsdk_env.sh
|
|
make ${MAKEOPTS} -C ports/webassembly VARIANT=pyscript submodules
|
|
make ${MAKEOPTS} -C ports/webassembly VARIANT=pyscript
|
|
}
|
|
|
|
function ci_webassembly_run_tests {
|
|
make -C ports/webassembly VARIANT=pyscript test_min
|
|
}
|
|
|
|
########################################################################################
|
|
# ports/mimxrt
|
|
|
|
function ci_mimxrt_setup {
|
|
ci_gcc_arm_setup
|
|
}
|
|
|
|
function ci_mimxrt_build {
|
|
make ${MAKEOPTS} -C mpy-cross
|
|
make ${MAKEOPTS} -C ports/mimxrt BOARD=MIMXRT1020_EVK submodules
|
|
make ${MAKEOPTS} -C ports/mimxrt BOARD=MIMXRT1020_EVK
|
|
make ${MAKEOPTS} -C ports/mimxrt BOARD=TEENSY40 submodules
|
|
make ${MAKEOPTS} -C ports/mimxrt BOARD=TEENSY40
|
|
make ${MAKEOPTS} -C ports/mimxrt BOARD=MIMXRT1060_EVK submodules
|
|
make ${MAKEOPTS} -C ports/mimxrt BOARD=MIMXRT1060_EVK CFLAGS_EXTRA=-DMICROPY_HW_USB_MSC=1
|
|
}
|
|
|
|
########################################################################################
|
|
# ports/nrf
|
|
|
|
function ci_nrf_setup {
|
|
ci_gcc_arm_setup
|
|
}
|
|
|
|
function ci_nrf_build {
|
|
ports/nrf/drivers/bluetooth/download_ble_stack.sh s140_nrf52_6_1_1
|
|
make ${MAKEOPTS} -C mpy-cross
|
|
make ${MAKEOPTS} -C ports/nrf submodules
|
|
make ${MAKEOPTS} -C ports/nrf BOARD=PCA10040
|
|
make ${MAKEOPTS} -C ports/nrf BOARD=MICROBIT
|
|
make ${MAKEOPTS} -C ports/nrf BOARD=PCA10056 SD=s140
|
|
make ${MAKEOPTS} -C ports/nrf BOARD=PCA10090
|
|
}
|
|
|
|
########################################################################################
|
|
# ports/powerpc
|
|
|
|
function ci_powerpc_setup {
|
|
sudo apt-get update
|
|
sudo apt-get install gcc-powerpc64le-linux-gnu libc6-dev-ppc64el-cross
|
|
}
|
|
|
|
function ci_powerpc_build {
|
|
make ${MAKEOPTS} -C ports/powerpc UART=potato
|
|
make ${MAKEOPTS} -C ports/powerpc UART=lpc_serial
|
|
}
|
|
|
|
########################################################################################
|
|
# ports/qemu
|
|
|
|
function ci_qemu_setup_arm {
|
|
ci_gcc_arm_setup
|
|
sudo apt-get update
|
|
sudo apt-get install qemu-system
|
|
sudo pip3 install pyelftools
|
|
sudo pip3 install ar
|
|
qemu-system-arm --version
|
|
}
|
|
|
|
function ci_qemu_setup_rv32 {
|
|
ci_gcc_riscv_setup
|
|
sudo apt-get update
|
|
sudo apt-get install qemu-system
|
|
sudo pip3 install pyelftools
|
|
sudo pip3 install ar
|
|
qemu-system-riscv32 --version
|
|
}
|
|
|
|
function ci_qemu_build_arm_prepare {
|
|
make ${MAKEOPTS} -C mpy-cross
|
|
make ${MAKEOPTS} -C ports/qemu submodules
|
|
}
|
|
|
|
function ci_qemu_build_arm_bigendian {
|
|
ci_qemu_build_arm_prepare
|
|
make ${MAKEOPTS} -C ports/qemu CFLAGS_EXTRA=-DMP_ENDIANNESS_BIG=1
|
|
}
|
|
|
|
function ci_qemu_build_arm_sabrelite {
|
|
ci_qemu_build_arm_prepare
|
|
make ${MAKEOPTS} -C ports/qemu BOARD=SABRELITE test_full
|
|
}
|
|
|
|
function ci_qemu_build_arm_thumb {
|
|
ci_qemu_build_arm_prepare
|
|
make ${MAKEOPTS} -C ports/qemu test_full
|
|
|
|
# Test building and running native .mpy with armv7m architecture.
|
|
ci_native_mpy_modules_build armv7m
|
|
make ${MAKEOPTS} -C ports/qemu test_natmod
|
|
}
|
|
|
|
function ci_qemu_build_rv32 {
|
|
make ${MAKEOPTS} -C mpy-cross
|
|
make ${MAKEOPTS} -C ports/qemu BOARD=VIRT_RV32 submodules
|
|
make ${MAKEOPTS} -C ports/qemu BOARD=VIRT_RV32 test_full
|
|
|
|
# Test building and running native .mpy with rv32imc architecture.
|
|
ci_native_mpy_modules_build rv32imc
|
|
make ${MAKEOPTS} -C ports/qemu BOARD=VIRT_RV32 test_natmod
|
|
}
|
|
|
|
########################################################################################
|
|
# ports/renesas-ra
|
|
|
|
function ci_renesas_ra_setup {
|
|
ci_gcc_arm_setup
|
|
sudo apt-get install protobuf-c-compiler
|
|
}
|
|
|
|
function ci_renesas_ra_board_build {
|
|
make ${MAKEOPTS} -C mpy-cross
|
|
make ${MAKEOPTS} -C ports/renesas-ra submodules
|
|
make ${MAKEOPTS} -C ports/renesas-ra BOARD=RA4M1_CLICKER
|
|
make ${MAKEOPTS} -C ports/renesas-ra BOARD=EK_RA6M2
|
|
make ${MAKEOPTS} -C ports/renesas-ra BOARD=EK_RA6M1
|
|
make ${MAKEOPTS} -C ports/renesas-ra BOARD=EK_RA4M1
|
|
make ${MAKEOPTS} -C ports/renesas-ra BOARD=EK_RA4W1
|
|
make ${MAKEOPTS} -C ports/renesas-ra BOARD=ARDUINO_PORTENTA_C33 submodules
|
|
make ${MAKEOPTS} -C ports/renesas-ra BOARD=ARDUINO_PORTENTA_C33
|
|
}
|
|
|
|
########################################################################################
|
|
# ports/rp2
|
|
|
|
function ci_rp2_setup {
|
|
ci_gcc_arm_setup
|
|
ci_picotool_setup
|
|
}
|
|
|
|
function ci_rp2_build {
|
|
make ${MAKEOPTS} -C mpy-cross
|
|
make ${MAKEOPTS} -C ports/rp2 submodules
|
|
make ${MAKEOPTS} -C ports/rp2
|
|
make ${MAKEOPTS} -C ports/rp2 BOARD=RPI_PICO_W submodules
|
|
make ${MAKEOPTS} -C ports/rp2 BOARD=RPI_PICO_W USER_C_MODULES=../../examples/usercmodule/micropython.cmake
|
|
make ${MAKEOPTS} -C ports/rp2 BOARD=RPI_PICO2 submodules
|
|
make ${MAKEOPTS} -C ports/rp2 BOARD=RPI_PICO2
|
|
make ${MAKEOPTS} -C ports/rp2 BOARD=W5100S_EVB_PICO submodules
|
|
# This build doubles as a build test for disabling threads in the config
|
|
make ${MAKEOPTS} -C ports/rp2 BOARD=W5100S_EVB_PICO CFLAGS_EXTRA=-DMICROPY_PY_THREAD=0
|
|
|
|
# Test building ninaw10 driver and NIC interface.
|
|
make ${MAKEOPTS} -C ports/rp2 BOARD=ARDUINO_NANO_RP2040_CONNECT submodules
|
|
make ${MAKEOPTS} -C ports/rp2 BOARD=ARDUINO_NANO_RP2040_CONNECT
|
|
}
|
|
|
|
########################################################################################
|
|
# ports/samd
|
|
|
|
function ci_samd_setup {
|
|
ci_gcc_arm_setup
|
|
}
|
|
|
|
function ci_samd_build {
|
|
make ${MAKEOPTS} -C mpy-cross
|
|
make ${MAKEOPTS} -C ports/samd submodules
|
|
make ${MAKEOPTS} -C ports/samd BOARD=ADAFRUIT_ITSYBITSY_M0_EXPRESS
|
|
make ${MAKEOPTS} -C ports/samd BOARD=ADAFRUIT_ITSYBITSY_M4_EXPRESS
|
|
}
|
|
|
|
########################################################################################
|
|
# ports/stm32
|
|
|
|
function ci_stm32_setup {
|
|
ci_gcc_arm_setup
|
|
pip3 install pyelftools
|
|
pip3 install ar
|
|
pip3 install pyhy
|
|
}
|
|
|
|
function ci_stm32_pyb_build {
|
|
make ${MAKEOPTS} -C mpy-cross
|
|
make ${MAKEOPTS} -C ports/stm32 MICROPY_PY_NETWORK_WIZNET5K=5200 submodules
|
|
make ${MAKEOPTS} -C ports/stm32 BOARD=PYBD_SF2 submodules
|
|
git submodule update --init lib/btstack
|
|
git submodule update --init lib/mynewt-nimble
|
|
make ${MAKEOPTS} -C ports/stm32 BOARD=PYBV11 MICROPY_PY_NETWORK_WIZNET5K=5200 USER_C_MODULES=../../examples/usercmodule
|
|
make ${MAKEOPTS} -C ports/stm32 BOARD=PYBD_SF2
|
|
make ${MAKEOPTS} -C ports/stm32 BOARD=PYBD_SF6 COPT=-O2 NANBOX=1 MICROPY_BLUETOOTH_NIMBLE=0 MICROPY_BLUETOOTH_BTSTACK=1
|
|
make ${MAKEOPTS} -C ports/stm32/mboot BOARD=PYBV10 CFLAGS_EXTRA='-DMBOOT_FSLOAD=1 -DMBOOT_VFS_LFS2=1'
|
|
make ${MAKEOPTS} -C ports/stm32/mboot BOARD=PYBD_SF6
|
|
make ${MAKEOPTS} -C ports/stm32/mboot BOARD=STM32F769DISC CFLAGS_EXTRA='-DMBOOT_ADDRESS_SPACE_64BIT=1 -DMBOOT_SDCARD_ADDR=0x100000000ULL -DMBOOT_SDCARD_BYTE_SIZE=0x400000000ULL -DMBOOT_FSLOAD=1 -DMBOOT_VFS_FAT=1'
|
|
|
|
# Test building native .mpy with armv7emsp architecture.
|
|
git submodule update --init lib/berkeley-db-1.xx
|
|
ci_native_mpy_modules_build armv7emsp
|
|
}
|
|
|
|
function ci_stm32_nucleo_build {
|
|
make ${MAKEOPTS} -C mpy-cross
|
|
make ${MAKEOPTS} -C ports/stm32 BOARD=NUCLEO_H743ZI submodules
|
|
git submodule update --init lib/mynewt-nimble
|
|
|
|
# Test building various MCU families, some with additional options.
|
|
make ${MAKEOPTS} -C ports/stm32 BOARD=NUCLEO_F091RC
|
|
make ${MAKEOPTS} -C ports/stm32 BOARD=STM32H573I_DK
|
|
make ${MAKEOPTS} -C ports/stm32 BOARD=NUCLEO_H743ZI COPT=-O2 CFLAGS_EXTRA='-DMICROPY_PY_THREAD=1'
|
|
make ${MAKEOPTS} -C ports/stm32 BOARD=NUCLEO_L073RZ
|
|
make ${MAKEOPTS} -C ports/stm32 BOARD=NUCLEO_L476RG DEBUG=1
|
|
|
|
# Test building a board with mboot packing enabled (encryption, signing, compression).
|
|
make ${MAKEOPTS} -C ports/stm32 BOARD=NUCLEO_WB55 USE_MBOOT=1 MBOOT_ENABLE_PACKING=1
|
|
make ${MAKEOPTS} -C ports/stm32/mboot BOARD=NUCLEO_WB55 USE_MBOOT=1 MBOOT_ENABLE_PACKING=1
|
|
# Test mboot_pack_dfu.py created a valid file, and that its unpack-dfu command works.
|
|
BOARD_WB55=ports/stm32/boards/NUCLEO_WB55
|
|
BUILD_WB55=ports/stm32/build-NUCLEO_WB55
|
|
python3 ports/stm32/mboot/mboot_pack_dfu.py -k $BOARD_WB55/mboot_keys.h unpack-dfu $BUILD_WB55/firmware.pack.dfu $BUILD_WB55/firmware.unpack.dfu
|
|
diff $BUILD_WB55/firmware.unpack.dfu $BUILD_WB55/firmware.dfu
|
|
# Test unpack-dfu command works without a secret key
|
|
tail -n +2 $BOARD_WB55/mboot_keys.h > $BOARD_WB55/mboot_keys_no_sk.h
|
|
python3 ports/stm32/mboot/mboot_pack_dfu.py -k $BOARD_WB55/mboot_keys_no_sk.h unpack-dfu $BUILD_WB55/firmware.pack.dfu $BUILD_WB55/firmware.unpack_no_sk.dfu
|
|
diff $BUILD_WB55/firmware.unpack.dfu $BUILD_WB55/firmware.unpack_no_sk.dfu
|
|
}
|
|
|
|
function ci_stm32_misc_build {
|
|
make ${MAKEOPTS} -C mpy-cross
|
|
make ${MAKEOPTS} -C ports/stm32 BOARD=ARDUINO_GIGA submodules
|
|
make ${MAKEOPTS} -C ports/stm32 BOARD=ARDUINO_GIGA
|
|
}
|
|
|
|
########################################################################################
|
|
# ports/unix
|
|
|
|
CI_UNIX_OPTS_SYS_SETTRACE=(
|
|
MICROPY_PY_BTREE=0
|
|
MICROPY_PY_FFI=0
|
|
MICROPY_PY_SSL=0
|
|
CFLAGS_EXTRA="-DMICROPY_PY_SYS_SETTRACE=1"
|
|
)
|
|
|
|
CI_UNIX_OPTS_SYS_SETTRACE_STACKLESS=(
|
|
MICROPY_PY_BTREE=0
|
|
MICROPY_PY_FFI=0
|
|
MICROPY_PY_SSL=0
|
|
CFLAGS_EXTRA="-DMICROPY_STACKLESS=1 -DMICROPY_STACKLESS_STRICT=1 -DMICROPY_PY_SYS_SETTRACE=1"
|
|
)
|
|
|
|
CI_UNIX_OPTS_QEMU_MIPS=(
|
|
CROSS_COMPILE=mips-linux-gnu-
|
|
VARIANT=coverage
|
|
MICROPY_STANDALONE=1
|
|
)
|
|
|
|
CI_UNIX_OPTS_QEMU_ARM=(
|
|
CROSS_COMPILE=arm-linux-gnueabi-
|
|
VARIANT=coverage
|
|
MICROPY_STANDALONE=1
|
|
)
|
|
|
|
CI_UNIX_OPTS_QEMU_RISCV64=(
|
|
CROSS_COMPILE=riscv64-linux-gnu-
|
|
VARIANT=coverage
|
|
MICROPY_STANDALONE=1
|
|
)
|
|
|
|
function ci_unix_build_helper {
|
|
make ${MAKEOPTS} -C mpy-cross
|
|
make ${MAKEOPTS} -C ports/unix "$@" submodules
|
|
make ${MAKEOPTS} -C ports/unix "$@" deplibs
|
|
make ${MAKEOPTS} -C ports/unix "$@"
|
|
}
|
|
|
|
function ci_unix_build_ffi_lib_helper {
|
|
$1 $2 -shared -o tests/ports/unix/ffi_lib.so tests/ports/unix/ffi_lib.c
|
|
}
|
|
|
|
function ci_unix_run_tests_helper {
|
|
make -C ports/unix "$@" test
|
|
}
|
|
|
|
function ci_unix_run_tests_full_helper {
|
|
variant=$1
|
|
shift
|
|
micropython=../ports/unix/build-$variant/micropython
|
|
make -C ports/unix VARIANT=$variant "$@" test_full
|
|
(cd tests && MICROPY_CPYTHON3=python3 MICROPY_MICROPYTHON=$micropython ./run-multitests.py multi_net/*.py)
|
|
(cd tests && MICROPY_CPYTHON3=python3 MICROPY_MICROPYTHON=$micropython ./run-perfbench.py 1000 1000)
|
|
}
|
|
|
|
function ci_native_mpy_modules_build {
|
|
if [ "$1" = "" ]; then
|
|
arch=x64
|
|
else
|
|
arch=$1
|
|
fi
|
|
for natmod in deflate features1 features3 features4 framebuf heapq random re
|
|
do
|
|
make -C examples/natmod/$natmod ARCH=$arch clean
|
|
make -C examples/natmod/$natmod ARCH=$arch
|
|
done
|
|
|
|
# features2 requires soft-float on armv7m, rv32imc, and xtensa. On armv6m
|
|
# the compiler generates absolute relocations in the object file
|
|
# referencing soft-float functions, which is not supported at the moment.
|
|
make -C examples/natmod/features2 ARCH=$arch clean
|
|
if [ $arch = "rv32imc" ] || [ $arch = "armv7m" ] || [ $arch = "xtensa" ]; then
|
|
make -C examples/natmod/features2 ARCH=$arch MICROPY_FLOAT_IMPL=float
|
|
elif [ $arch != "armv6m" ]; then
|
|
make -C examples/natmod/features2 ARCH=$arch
|
|
fi
|
|
|
|
# btree requires thread local storage support on rv32imc.
|
|
if [ $arch != "rv32imc" ]; then
|
|
make -C examples/natmod/btree ARCH=$arch clean
|
|
make -C examples/natmod/btree ARCH=$arch
|
|
fi
|
|
}
|
|
|
|
function ci_native_mpy_modules_32bit_build {
|
|
ci_native_mpy_modules_build x86
|
|
}
|
|
|
|
function ci_unix_minimal_build {
|
|
make ${MAKEOPTS} -C ports/unix VARIANT=minimal
|
|
}
|
|
|
|
function ci_unix_minimal_run_tests {
|
|
(cd tests && MICROPY_CPYTHON3=python3 MICROPY_MICROPYTHON=../ports/unix/build-minimal/micropython ./run-tests.py -e exception_chain -e self_type_check -e subclass_native_init -d basics)
|
|
}
|
|
|
|
function ci_unix_standard_build {
|
|
ci_unix_build_helper VARIANT=standard
|
|
ci_unix_build_ffi_lib_helper gcc
|
|
}
|
|
|
|
function ci_unix_standard_run_tests {
|
|
ci_unix_run_tests_full_helper standard
|
|
}
|
|
|
|
function ci_unix_standard_v2_build {
|
|
ci_unix_build_helper VARIANT=standard MICROPY_PREVIEW_VERSION_2=1
|
|
ci_unix_build_ffi_lib_helper gcc
|
|
}
|
|
|
|
function ci_unix_standard_v2_run_tests {
|
|
ci_unix_run_tests_full_helper standard
|
|
}
|
|
|
|
function ci_unix_coverage_setup {
|
|
sudo pip3 install setuptools
|
|
sudo pip3 install pyelftools
|
|
sudo pip3 install ar
|
|
gcc --version
|
|
python3 --version
|
|
}
|
|
|
|
function ci_unix_coverage_build {
|
|
ci_unix_build_helper VARIANT=coverage
|
|
ci_unix_build_ffi_lib_helper gcc
|
|
}
|
|
|
|
function ci_unix_coverage_run_tests {
|
|
ci_unix_run_tests_full_helper coverage
|
|
}
|
|
|
|
function ci_unix_coverage_run_mpy_merge_tests {
|
|
mptop=$(pwd)
|
|
outdir=$(mktemp -d)
|
|
allmpy=()
|
|
|
|
# Compile a selection of tests to .mpy and execute them, collecting the output.
|
|
# None of the tests should SKIP.
|
|
for inpy in $mptop/tests/basics/[acdel]*.py; do
|
|
test=$(basename $inpy .py)
|
|
echo $test
|
|
outmpy=$outdir/$test.mpy
|
|
$mptop/mpy-cross/build/mpy-cross -o $outmpy $inpy
|
|
(cd $outdir && $mptop/ports/unix/build-coverage/micropython -m $test >> out-individual)
|
|
allmpy+=($outmpy)
|
|
done
|
|
|
|
# Merge all the tests into one .mpy file, and then execute it.
|
|
python3 $mptop/tools/mpy-tool.py --merge -o $outdir/merged.mpy ${allmpy[@]}
|
|
(cd $outdir && $mptop/ports/unix/build-coverage/micropython -m merged > out-merged)
|
|
|
|
# Make sure the outputs match.
|
|
diff $outdir/out-individual $outdir/out-merged && /bin/rm -rf $outdir
|
|
}
|
|
|
|
function ci_unix_coverage_run_native_mpy_tests {
|
|
MICROPYPATH=examples/natmod/features2 ./ports/unix/build-coverage/micropython -m features2
|
|
(cd tests && ./run-natmodtests.py "$@" extmod/*.py)
|
|
}
|
|
|
|
function ci_unix_32bit_setup {
|
|
sudo dpkg --add-architecture i386
|
|
sudo apt-get update
|
|
sudo apt-get install gcc-multilib g++-multilib libffi-dev:i386 python2.7
|
|
sudo pip3 install setuptools
|
|
sudo pip3 install pyelftools
|
|
sudo pip3 install ar
|
|
gcc --version
|
|
python2.7 --version
|
|
python3 --version
|
|
}
|
|
|
|
function ci_unix_coverage_32bit_build {
|
|
ci_unix_build_helper VARIANT=coverage MICROPY_FORCE_32BIT=1
|
|
ci_unix_build_ffi_lib_helper gcc -m32
|
|
}
|
|
|
|
function ci_unix_coverage_32bit_run_tests {
|
|
ci_unix_run_tests_full_helper coverage MICROPY_FORCE_32BIT=1
|
|
}
|
|
|
|
function ci_unix_coverage_32bit_run_native_mpy_tests {
|
|
ci_unix_coverage_run_native_mpy_tests --arch x86
|
|
}
|
|
|
|
function ci_unix_nanbox_build {
|
|
# Use Python 2 to check that it can run the build scripts
|
|
ci_unix_build_helper PYTHON=python2.7 VARIANT=nanbox CFLAGS_EXTRA="-DMICROPY_PY_MATH_CONSTANTS=1"
|
|
ci_unix_build_ffi_lib_helper gcc -m32
|
|
}
|
|
|
|
function ci_unix_nanbox_run_tests {
|
|
ci_unix_run_tests_full_helper nanbox PYTHON=python2.7
|
|
}
|
|
|
|
function ci_unix_float_build {
|
|
ci_unix_build_helper VARIANT=standard CFLAGS_EXTRA="-DMICROPY_FLOAT_IMPL=MICROPY_FLOAT_IMPL_FLOAT"
|
|
ci_unix_build_ffi_lib_helper gcc
|
|
}
|
|
|
|
function ci_unix_float_run_tests {
|
|
# TODO get this working: ci_unix_run_tests_full_helper standard CFLAGS_EXTRA="-DMICROPY_FLOAT_IMPL=MICROPY_FLOAT_IMPL_FLOAT"
|
|
ci_unix_run_tests_helper CFLAGS_EXTRA="-DMICROPY_FLOAT_IMPL=MICROPY_FLOAT_IMPL_FLOAT"
|
|
}
|
|
|
|
function ci_unix_clang_setup {
|
|
sudo apt-get install clang
|
|
clang --version
|
|
}
|
|
|
|
function ci_unix_stackless_clang_build {
|
|
make ${MAKEOPTS} -C mpy-cross CC=clang
|
|
make ${MAKEOPTS} -C ports/unix submodules
|
|
make ${MAKEOPTS} -C ports/unix CC=clang CFLAGS_EXTRA="-DMICROPY_STACKLESS=1 -DMICROPY_STACKLESS_STRICT=1"
|
|
}
|
|
|
|
function ci_unix_stackless_clang_run_tests {
|
|
ci_unix_run_tests_helper CC=clang
|
|
}
|
|
|
|
function ci_unix_float_clang_build {
|
|
make ${MAKEOPTS} -C mpy-cross CC=clang
|
|
make ${MAKEOPTS} -C ports/unix submodules
|
|
make ${MAKEOPTS} -C ports/unix CC=clang CFLAGS_EXTRA="-DMICROPY_FLOAT_IMPL=MICROPY_FLOAT_IMPL_FLOAT"
|
|
}
|
|
|
|
function ci_unix_float_clang_run_tests {
|
|
ci_unix_run_tests_helper CC=clang
|
|
}
|
|
|
|
function ci_unix_settrace_build {
|
|
make ${MAKEOPTS} -C mpy-cross
|
|
make ${MAKEOPTS} -C ports/unix submodules
|
|
make ${MAKEOPTS} -C ports/unix "${CI_UNIX_OPTS_SYS_SETTRACE[@]}"
|
|
}
|
|
|
|
function ci_unix_settrace_run_tests {
|
|
ci_unix_run_tests_full_helper standard "${CI_UNIX_OPTS_SYS_SETTRACE[@]}"
|
|
}
|
|
|
|
function ci_unix_settrace_stackless_build {
|
|
make ${MAKEOPTS} -C mpy-cross
|
|
make ${MAKEOPTS} -C ports/unix submodules
|
|
make ${MAKEOPTS} -C ports/unix "${CI_UNIX_OPTS_SYS_SETTRACE_STACKLESS[@]}"
|
|
}
|
|
|
|
function ci_unix_settrace_stackless_run_tests {
|
|
ci_unix_run_tests_full_helper standard "${CI_UNIX_OPTS_SYS_SETTRACE_STACKLESS[@]}"
|
|
}
|
|
|
|
function ci_unix_macos_build {
|
|
make ${MAKEOPTS} -C mpy-cross
|
|
make ${MAKEOPTS} -C ports/unix submodules
|
|
#make ${MAKEOPTS} -C ports/unix deplibs
|
|
make ${MAKEOPTS} -C ports/unix
|
|
# check for additional compiler errors/warnings
|
|
make ${MAKEOPTS} -C ports/unix VARIANT=coverage submodules
|
|
make ${MAKEOPTS} -C ports/unix VARIANT=coverage
|
|
}
|
|
|
|
function ci_unix_macos_run_tests {
|
|
# Issues with macOS tests:
|
|
# - float_parse and float_parse_doubleprec parse/print floats out by a few mantissa bits
|
|
# - ffi_callback crashes for an unknown reason
|
|
(cd tests && MICROPY_MICROPYTHON=../ports/unix/build-standard/micropython ./run-tests.py --exclude '(float_parse|float_parse_doubleprec|ffi_callback).py')
|
|
}
|
|
|
|
function ci_unix_qemu_mips_setup {
|
|
sudo apt-get update
|
|
sudo apt-get install gcc-mips-linux-gnu g++-mips-linux-gnu libc6-mips-cross
|
|
sudo apt-get install qemu-user
|
|
qemu-mips --version
|
|
sudo mkdir /etc/qemu-binfmt
|
|
sudo ln -s /usr/mips-linux-gnu/ /etc/qemu-binfmt/mips
|
|
}
|
|
|
|
function ci_unix_qemu_mips_build {
|
|
ci_unix_build_helper "${CI_UNIX_OPTS_QEMU_MIPS[@]}"
|
|
ci_unix_build_ffi_lib_helper mips-linux-gnu-gcc
|
|
}
|
|
|
|
function ci_unix_qemu_mips_run_tests {
|
|
file ./ports/unix/build-coverage/micropython
|
|
(cd tests && MICROPY_MICROPYTHON=../ports/unix/build-coverage/micropython ./run-tests.py)
|
|
}
|
|
|
|
function ci_unix_qemu_arm_setup {
|
|
sudo apt-get update
|
|
sudo apt-get install gcc-arm-linux-gnueabi g++-arm-linux-gnueabi
|
|
sudo apt-get install qemu-user
|
|
qemu-arm --version
|
|
sudo mkdir /etc/qemu-binfmt
|
|
sudo ln -s /usr/arm-linux-gnueabi/ /etc/qemu-binfmt/arm
|
|
}
|
|
|
|
function ci_unix_qemu_arm_build {
|
|
ci_unix_build_helper "${CI_UNIX_OPTS_QEMU_ARM[@]}"
|
|
ci_unix_build_ffi_lib_helper arm-linux-gnueabi-gcc
|
|
}
|
|
|
|
function ci_unix_qemu_arm_run_tests {
|
|
# Issues with ARM tests:
|
|
# - (i)listdir does not work, it always returns the empty list (it's an issue with the underlying C call)
|
|
file ./ports/unix/build-coverage/micropython
|
|
(cd tests && MICROPY_MICROPYTHON=../ports/unix/build-coverage/micropython ./run-tests.py --exclude 'vfs_posix.*\.py')
|
|
}
|
|
|
|
function ci_unix_qemu_riscv64_setup {
|
|
sudo apt-get update
|
|
sudo apt-get install gcc-riscv64-linux-gnu g++-riscv64-linux-gnu
|
|
sudo apt-get install qemu-user
|
|
qemu-riscv64 --version
|
|
sudo mkdir /etc/qemu-binfmt
|
|
sudo ln -s /usr/riscv64-linux-gnu/ /etc/qemu-binfmt/riscv64
|
|
}
|
|
|
|
function ci_unix_qemu_riscv64_build {
|
|
ci_unix_build_helper "${CI_UNIX_OPTS_QEMU_RISCV64[@]}"
|
|
ci_unix_build_ffi_lib_helper riscv64-linux-gnu-gcc
|
|
}
|
|
|
|
function ci_unix_qemu_riscv64_run_tests {
|
|
file ./ports/unix/build-coverage/micropython
|
|
(cd tests && MICROPY_MICROPYTHON=../ports/unix/build-coverage/micropython ./run-tests.py)
|
|
}
|
|
|
|
########################################################################################
|
|
# ports/windows
|
|
|
|
function ci_windows_setup {
|
|
sudo apt-get install gcc-mingw-w64
|
|
}
|
|
|
|
function ci_windows_build {
|
|
make ${MAKEOPTS} -C mpy-cross
|
|
make ${MAKEOPTS} -C ports/windows submodules
|
|
make ${MAKEOPTS} -C ports/windows CROSS_COMPILE=i686-w64-mingw32-
|
|
}
|
|
|
|
########################################################################################
|
|
# ports/zephyr
|
|
|
|
ZEPHYR_DOCKER_VERSION=v0.27.4
|
|
ZEPHYR_SDK_VERSION=0.17.0
|
|
ZEPHYR_VERSION=v4.0.0
|
|
|
|
function ci_zephyr_setup {
|
|
IMAGE=ghcr.io/zephyrproject-rtos/ci:${ZEPHYR_DOCKER_VERSION}
|
|
|
|
docker pull ${IMAGE}
|
|
|
|
# Directories cached by GitHub Actions, mounted
|
|
# into the container
|
|
ZEPHYRPROJECT_DIR="$(pwd)/zephyrproject"
|
|
CCACHE_DIR="$(pwd)/.ccache"
|
|
|
|
mkdir -p "${ZEPHYRPROJECT_DIR}"
|
|
mkdir -p "${CCACHE_DIR}"
|
|
|
|
docker run --name zephyr-ci -d -it \
|
|
-v "$(pwd)":/micropython \
|
|
-v "${ZEPHYRPROJECT_DIR}":/zephyrproject \
|
|
-v "${CCACHE_DIR}":/root/.cache/ccache \
|
|
-e ZEPHYR_SDK_INSTALL_DIR=/opt/toolchains/zephyr-sdk-${ZEPHYR_SDK_VERSION} \
|
|
-e ZEPHYR_TOOLCHAIN_VARIANT=zephyr \
|
|
-e ZEPHYR_BASE=/zephyrproject/zephyr \
|
|
-w /micropython/ports/zephyr \
|
|
${IMAGE}
|
|
docker ps -a
|
|
|
|
# qemu-system-arm is needed to run the test suite.
|
|
sudo apt-get update
|
|
sudo apt-get install qemu-system-arm
|
|
qemu-system-arm --version
|
|
}
|
|
|
|
function ci_zephyr_install {
|
|
docker exec zephyr-ci west init --mr ${ZEPHYR_VERSION} /zephyrproject
|
|
docker exec -w /zephyrproject zephyr-ci west update
|
|
docker exec -w /zephyrproject zephyr-ci west zephyr-export
|
|
}
|
|
|
|
function ci_zephyr_build {
|
|
docker exec zephyr-ci west build -p auto -b qemu_x86 -- -DCONF_FILE=prj_minimal.conf
|
|
docker exec zephyr-ci west build -p auto -b frdm_k64f
|
|
docker exec zephyr-ci west build -p auto -b mimxrt1050_evk
|
|
docker exec zephyr-ci west build -p auto -b nucleo_wb55rg # for bluetooth
|
|
}
|
|
|
|
function ci_zephyr_run_tests {
|
|
docker exec zephyr-ci west build -p auto -b qemu_cortex_m3 -- -DCONF_FILE=prj_minimal.conf
|
|
# Issues with zephyr tests:
|
|
# - inf_nan_arith fails pow(-1, nan) test
|
|
(cd tests && ./run-tests.py -t execpty:"qemu-system-arm -cpu cortex-m3 -machine lm3s6965evb -nographic -monitor null -serial pty -kernel ../ports/zephyr/build/zephyr/zephyr.elf" -d basics float --exclude inf_nan_arith)
|
|
}
|
|
|
|
########################################################################################
|
|
# ports/alif
|
|
|
|
function ci_alif_setup {
|
|
ci_gcc_arm_setup
|
|
}
|
|
|
|
function ci_alif_ae3_build {
|
|
make ${MAKEOPTS} -C mpy-cross
|
|
make ${MAKEOPTS} -C ports/alif BOARD=OPENMV_AE3 MCU_CORE=M55_HP submodules
|
|
make ${MAKEOPTS} -C ports/alif BOARD=OPENMV_AE3 MCU_CORE=M55_HE submodules
|
|
make ${MAKEOPTS} -C ports/alif BOARD=OPENMV_AE3 MCU_CORE=M55_DUAL
|
|
make ${MAKEOPTS} -C ports/alif BOARD=ALIF_ENSEMBLE MCU_CORE=M55_DUAL
|
|
}
|