error: unrecognized disk label #119

New Issue

2021-06-03T09:42:57+02:00

jerabaul29 commented

2021-06-03 09:42:57 +02:00

(Migrated from github.com)

I hit an error when running the script (rpi-clone the SD card of the built in reader into a USB SSD drive). However, things look fine. Any idea what this implies / how to fix? See the Error: /dev/sda: unrecognised disk label below.

pi@raspberrypi:~/Git/rpi-clone $ lsblk
NAME        MAJ:MIN RM   SIZE RO TYPE MOUNTPOINT
sda           8:0    0 223.6G  0 disk 
mmcblk0     179:0    0  14.9G  0 disk 
|-mmcblk0p1 179:1    0   256M  0 part /boot
`-mmcblk0p2 179:2    0  14.6G  0 part /
pi@raspberrypi:~/Git/rpi-clone $ sudo rpi-clone sda
Error: /dev/sda: unrecognised disk label

Booted disk: mmcblk0 15.9GB                Destination disk: sda 240.1GB
---------------------------------------------------------------------------
Part      Size    FS     Label           Part   Size  FS  Label
1 /boot   256.0M  fat32  --                                 
2 root     14.6G  ext4   rootfs                             
---------------------------------------------------------------------------
== Initialize: IMAGE partition table - partition number mismatch: 2 -> 0 ==
1 /boot               (47.5M used)   : MKFS  SYNC to sda1
2 root                (1.4G used)    : RESIZE  MKFS  SYNC to sda2
---------------------------------------------------------------------------
Run setup script       : no.
Verbose mode           : no.
-----------------------:
** WARNING **          : All destination disk sda data will be overwritten!
-----------------------:

Initialize and clone to the destination disk sda?  (yes/no): yes
Optional destination ext type file system label (16 chars max): 

Initializing
  Imaging past partition 1 start.
  => dd if=/dev/mmcblk0 of=/dev/sda bs=1M count=8 ...
  Resizing destination disk last partition ...
    Resize success.
  Changing destination Disk ID ...
  => mkfs -t vfat -F 32  /dev/sda1 ...
  => mkfs -t ext4  /dev/sda2 ...

Syncing file systems (can take a long time)
Syncing mounted partitions:
  Mounting /dev/sda2 on /mnt/clone
  => rsync // /mnt/clone with-root-excludes ...
  Mounting /dev/sda1 on /mnt/clone/boot
  => rsync /boot/ /mnt/clone/boot  ...

Editing /mnt/clone/boot/cmdline.txt PARTUUID to use c330f0f5
Editing /mnt/clone/etc/fstab PARTUUID to use c330f0f5
===============================
Done with clone to /dev/sda
   Start - 08:38:23    End - 08:39:42    Elapsed Time - 1:19

Cloned partitions are mounted on /mnt/clone for inspection or customizing. 

Hit Enter when ready to unmount the /dev/sda partitions ...
  unmounting /mnt/clone/boot
  unmounting /mnt/clone
===============================

I hit an error when running the script (rpi-clone the SD card of the built in reader into a USB SSD drive). However, things look fine. Any idea what this implies / how to fix? See the ```Error: /dev/sda: unrecognised disk label``` below. ``` pi@raspberrypi:~/Git/rpi-clone $ lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sda 8:0 0 223.6G 0 disk mmcblk0 179:0 0 14.9G 0 disk |-mmcblk0p1 179:1 0 256M 0 part /boot `-mmcblk0p2 179:2 0 14.6G 0 part / pi@raspberrypi:~/Git/rpi-clone $ sudo rpi-clone sda Error: /dev/sda: unrecognised disk label Booted disk: mmcblk0 15.9GB Destination disk: sda 240.1GB --------------------------------------------------------------------------- Part Size FS Label Part Size FS Label 1 /boot 256.0M fat32 -- 2 root 14.6G ext4 rootfs --------------------------------------------------------------------------- == Initialize: IMAGE partition table - partition number mismatch: 2 -> 0 == 1 /boot (47.5M used) : MKFS SYNC to sda1 2 root (1.4G used) : RESIZE MKFS SYNC to sda2 --------------------------------------------------------------------------- Run setup script : no. Verbose mode : no. -----------------------: ** WARNING ** : All destination disk sda data will be overwritten! -----------------------: Initialize and clone to the destination disk sda? (yes/no): yes Optional destination ext type file system label (16 chars max): Initializing Imaging past partition 1 start. => dd if=/dev/mmcblk0 of=/dev/sda bs=1M count=8 ... Resizing destination disk last partition ... Resize success. Changing destination Disk ID ... => mkfs -t vfat -F 32 /dev/sda1 ... => mkfs -t ext4 /dev/sda2 ... Syncing file systems (can take a long time) Syncing mounted partitions: Mounting /dev/sda2 on /mnt/clone => rsync // /mnt/clone with-root-excludes ... Mounting /dev/sda1 on /mnt/clone/boot => rsync /boot/ /mnt/clone/boot ... Editing /mnt/clone/boot/cmdline.txt PARTUUID to use c330f0f5 Editing /mnt/clone/etc/fstab PARTUUID to use c330f0f5 =============================== Done with clone to /dev/sda Start - 08:38:23 End - 08:39:42 Elapsed Time - 1:19 Cloned partitions are mounted on /mnt/clone for inspection or customizing. Hit Enter when ready to unmount the /dev/sda partitions ... unmounting /mnt/clone/boot unmounting /mnt/clone =============================== ```

Sign in to join this conversation.

1 Participants

Notifications

Due Date

No due date set.

Dependencies

No dependencies set.

Reference: Lerking/rpi-clone#119