The warning is not intended to disable the Create button and must only be shown
when the folder is not found, so this is implemented in the folder name exists
callback.
A "name" entry was added to FileExistsData to pass the filename to the callback
https://bugzilla.gnome.org/show_bug.cgi?id=751800
Allow the name and location columns to be resized, but arrange
for their sizing to be reset when the column layout changes (either
by the location column appearing/disappearing, or by the time
column changing between mtime and atime. This gives a decent
compromise between good automatic sizing and user control.
The code for getting the selected files was assuming that
we are always in browse mode, and was causing warnings when
hitting Ctrl-L twice, right after opening the file chooser.
The fix is to simple use the model that is passed into the
callback.
Avoid reloading models unnecessarily, e.g. when the user
switches to search and back without starting a search.
Keep the current list contents visible until a search is
actually started. Also, synchronize any changes in the
column layout with the corresponding model changes.
This search engine reuses the GFileInfo that is already loaded
for the file list, to ensure that hits from the current directory
always appear promptly.
Don't show Recent in the sidebar when we are in save mode.
We also ignore the startup-mode = recent in save mode now - we
don't want to populate the file list with recent files if Recent
is not on the sidebar. If you really want to go there, you can
still enter recent:// in the location entry.
https://bugzilla.gnome.org/show_bug.cgi?id=751653
In save modes, the entry is really more for entering a name than
entering a full location, so don't go there eagerly when '.', '/'
or '~' are pressed. Make Ctrl-L work better in this mode too.
Use the same code that brings up the location entry on '/',
'~' or '.' also when the focus is not on the file list. This
prevents those key presses on the sidebar from ending up in
the search entry.
Some internal containers were erroneously taking focus, interrupting
the flow of tab keynav, and using arrow keynav to go from the file
list to the sidebar did not work anymore, after the recent sidebar
rewrite.
Make the file chooser entry optionally capture Escape
and emit a signal. Make the file chooser widget hide the
entry on that signal and go back to the path bar.
This gives us a two-level undo:
location entry -> path bar -> dialog close.
When the location entry is permanently displayed in the
header for save mode, we still let the first Escape close
the dialog.
Arrange things so that hitting Escape during a running
search stops the search, but leaves the search results
around, and hitting Escape again leaves the search mode.
The location column did not work for search results in recent://.
Fix that by looking at the target uri in this case. Show the location
column in recent mode. And make it more similar to nautilus by
showing the full path if it is not below $HOME.
The places sidebar already does all the work to determine the
right label to use for the current location of the filechooser.
We want to use the same label in the headerbar subtitle, so
add some private API to get it.
Under Wayland, fullscreen/maximized windows may not cover the entire
area when a size increment is specified.
Ignore size increments for fullscreen/maximized windows just like most
window managers do under X11 so that windows with size increments can
still be fullscreen or fully maximized under Wayland as well.
https://bugzilla.gnome.org/show_bug.cgi?id=751368
Since 740bcf5, we use these properties to properly compute shadow widths
for unmapped windows. If a client calls gtk_window_maximize and a window
manager unmaximizes a window, we should draw borders, so we need to
reset these when we get the property notification.
This queues an unnecessary resize on the toplevel, and is not needed
anymore, now that GtkWidget does not call
gtk_style_context_set_background() on the window's GdkWindow anymore.
And wrap it with G_GNUC_IGNORE_DEPRECATIONS.
Unfortunately we can't stop rendering the background altogether here.
Also, refactor some common code in a single function.
And wrap it with G_GNUC_IGNORE_DEPRECATIONS.
Unfortunately we can't stop rendering the background altogether here.
Also, gtk_style_context_set_background() should really be called every
time the style is updated. Fix that.
We used to "invalidate" scroll valuators, so the next scroll event could
be used as the base for the next scroll deltas. This has the inconvenience
that it invariably consumes the first event received after enter and,
due to interactions with WM overeager passive button grabs, there's a
possibility we don't scroll at all if we receive interleaved "smooth
scroll" XI_Motion events and XI_Enter events (Normally triggered by regular
scroll wheels in mice).
In order to fix this, and at the expense of some sync-call overhead on
XI_Enter events (one XIQueryDevice call per slave device), query the
current scroll valuator state for all the slaves of the entered pointer,
so we do know beforehand the right base values. If new devices are plugged
while the pointer is on top of the client, the initialized scroll values
will match the valuators'.
https://bugzilla.gnome.org/show_bug.cgi?id=750994https://bugzilla.gnome.org/show_bug.cgi?id=750870
It has the unintended effect of picking the suggested action from the
context, which conflicts with the (possibly 0) status we set on our
::drag-motion handler.
Given this widget is not interested in listening to DnD from every
possible target, it is safe to just disable it.
gdk_x11_device_xi2_window_at_position() may attempt to push/pop
a few error trap pairs while traversing the window tree. Move it
outside the server grab, and around the multiple XIQueryPointer
calls we may do here.
https://bugzilla.gnome.org/show_bug.cgi?id=751739
This allows a widget to override global font_options, such as hinting and
subpixel order. The widget's PangoContext is updated when this is set.
Some update code from gtk_widget_update_pango_context was moved to
update_pango_context so that gtk_widget_update_pango_context runs it.
http://bugzilla.gnome.org/show_bug.cgi?id=751677
The WM isn't aware of O-R (popup) or offscreen windows. If somebody
maps an offscreen or a popup GTK+ window before the main window, we'll
complete the sequence before a "real" window is mapped. Make sure to
ignore these for startup notifies.
In case the X11 backend is not enabled, we still need to include the
pangofc-fontmap.h header file, as we use the Pango/FontConfig API in
both the X11 and Wayland case.
https://bugzilla.gnome.org/show_bug.cgi?id=751625
We mistakenly forced the "STRING" type, which was able to confuse higher
layer helpers like gtk_selection_data_get_uris(). This fixes a crash
happening anytime a drop is attempted on a GtkPlacesSidebar.
Currently, due to the lack of progress information in the Wayland DnD
protocol, we assume a DnD operation is finished after the first
data_source.send is finished (It's either that or leaving stuck grabs).
This however breaks previous assumptions that dest widgets can request
the data multiple times, even in response to GtkWidget::drag-motion.
This leaves us with a NULL owner for the DnD atom when we aren't
finished receiving wl_data_source events yet, causing a crash.
This commit fixes the crash, the behavior left is still far from
desirable though...
Previously, the unpremultiplied values from the GdkRGBA were taken. Now
we premultiply the color values as specified by the CSS specs.
This is only relevant when transitioning with translucent colors.
An example is the halfway transition between transparent (0, 0, 0, 0)
and white (1, 1, 1, 1). Previously, all 4 values where transitioned
separately and the result was semi-transparent gray (0.5, 0.5, 0.5,
0.5).
By depending on the alpha value, the result is now semi-transparent
white (1, 1, 1, 0.5) which is what one would naively expect.
New reftest: color-transition
And force the ungrab on it, instead of the slave, in the case of
local DnD drop. This avoids confusions on the pointer events spawn
from DnD, as GDK doesn't think anymore those are from a slave device.
Most namely, it fixes the stuck grab when finishing DnD on the
same app it was started from.
We currently only hold the last offer received, which is wrong, as both
are independent and have different life cycles.
This means we have to store per-selection wl_data_offer and targets, and
maintain these as appropriate from the clipboard/DnD specific entry points.
Setting these properties has the side-effect of setting the
corresponding -set properties, which makes GTK+ behave subtly
different. So don't mess with these.
gtk_image_set_from_resource was setting the resource_path,
only to have it overwritten again before returning. That
is not as it should be, so change things to set the resource
path late.
https://bugzilla.gnome.org/show_bug.cgi?id=751443
This oddly can be reproduced with weston+weston-dnd, when dragging
anything from GTK+ into weston-dnd, it will insist on picking its
custom application/x-wayland-dnd-flower mimetype, and this request
forwarded by the compositor, even if GTK+ didn't announce it on
its wl_data_source mimetype list. (What should probably happen here
is that the request is silenced, and/or weston-dnd picks (null))
This should be harmless, we are leaking though the fd in that case,
because the emission of GdkEventSelection on an unhandled mimetype
results in NOP. In order to avoid this, we should check whether the
mimetype is supported at all on the backend code and possibly close
the fd, this involves storing these in the first place.
https://bugzilla.gnome.org/show_bug.cgi?id=751414
If the other peer requests data too fast (too rare/unlikely though),
we might receive multiple gdk_wayland_selection_request_target() calls
with no ending gdk_wayland_selection_check_write(), in which case the
fd is leaked as no GOutputStream was created to take over it.
https://bugzilla.gnome.org/show_bug.cgi?id=751414
We weren't catching all the places where the AsyncWriteData operation
should be cancelled, which could happen if we repeatedly request the
same target on different fds.
https://bugzilla.gnome.org/show_bug.cgi?id=751414
At the moment we create the AsyncWriteData, the ownership of the
fd is granted to the GOutputStream, and the fd set to -1, so at
this moment we're just silently getting EBADFD.
This partially reverts 25885ca600, the initialization of .fd
to -1 is valid and stays though.
https://bugzilla.gnome.org/show_bug.cgi?id=751414
On X11 this is something the windowing system does for us, which the
wayland backend should emulate, being grabs completely client-side.
So, if the grab and current focus windows differ, make sure we emit
focus/crossing events as it corresponds to the grab device.
This was being done so only on pointers. Internally, a GdkDeviceGrabInfo
is kept for each of the master pointer/keyboard, failing to do this for
keyboards results in a stuck keyboard grab.
https://bugzilla.gnome.org/show_bug.cgi?id=748892
The fd must be closed on async_write_data_free(), but we should also
initialize it to -1 so gdk_wayland_selection_check_write() doesn't wrongly
pick the stdin fd.
https://bugzilla.gnome.org/show_bug.cgi?id=751414
Don't add the container border to the title request size; it
is only used for the child widget.
Don't call gtk_widget_get_preferred_width_for_height() for
the title bar with an unrelated height and subtract the title
bar height before querying the child widget width.
Guard against negative size requests after substracting the
borders/shadows and the title bar.
https://bugzilla.gnome.org/show_bug.cgi?id=751341
The minimum title width affects the minimum window width
for CSD windows. To allow smaller windows like without
CSD reduce it a bit (276px vs 156px min width)
https://bugzilla.gnome.org/show_bug.cgi?id=751341
In the non-CSD case we checked for 0x0 window size requisition
and replaced it with 200x200 so the window was still visible.
This no longer works in case of CSD as the shadow and title bar
are always added to the requisition resulting in a titlebar/shadow
only window in case there is no child widget (this is currently
visible under wayland or when setting GTK_CSD=1).
Instead of special casing the final window size, special case
the child requisition paths instead. This gives us the same
requisition in both, CSD and non-CSD cases (the header bar
has a too large minimum width atm so the resulting window is
still not the same)
https://bugzilla.gnome.org/show_bug.cgi?id=751341
Try harder not to push the scale out of balance by marks. With
this change, the remaining difference in the drawing is down
to asymmetric assets and margins coming out of the theme.
To fully support such asymmetric rendering, we need implement
baseline alignment for scales.
https://bugzilla.gnome.org/show_bug.cgi?id=749650
Request "output-bin-supported" and "output-bin-default" attributes through
IPP if there is no PPD for selected printer.
Pass "output-bin" option with other options in printer_get_options().
Translate standard IPP values of "output-bin" option.
https://bugzilla.gnome.org/show_bug.cgi?id=725441
This error resulted in warnings like
"pixman_region32_init_rect: Invalid rectangle passed"
In case the window is smaller than handle_size * 2 the resulting
edge window got a negative size. Prevent that by limiting the
handle size to half the respective edge length. This also
prevents the corner windows from overlapping in case the window
is too small.
When the stack is destroyed we do not want to waste time running
animations and notifying listeners about which is our current
visible child.
This is not only an optimization, but it is important for the stack
switcher widgets: since they are in another branch of the hieratchy
we do not want to get notifications while the stack is being destroyed.
Based on a patch by Paolo Borelli
https://bugzilla.gnome.org/show_bug.cgi?id=724506
The calculation to update the initial slider position on zoom
changes was not working correctly when using keys to toggle
zoom on and off for scales. Avoid it by updating the position
beforehand.
Moving the mouse while pressing one of the steppers was making
the slider jump to the end, unexpectedly. This was caused by the
drag gesture kicking in when it shouldn't. Fix this by making
all drag gesture signal handlers only do something if we are in
a drag thats started on the slider.
https://bugzilla.gnome.org/show_bug.cgi?id=751050
The filter combo box in the file chooser was stretching to match
the height of the extra widgets next to it. Since, stretched combo
boxes are not a pretty sight, make it stick to the top instead.
Patch by Caolán McNamara,
https://bugzilla.gnome.org/show_bug.cgi?id=751227
Marking these as "Since: 3.14.1" may be more accurate, but
it causes gtk-doc to not put these symbols in any versioned
index at all (it generates an unused index for 3.14.1). So,
lets lie a little, and say these symbols were added in 3.14.
After the recent change thta introduced boxes between the pages
and the notebook, we were no longer careful enough when disposing
the assistant. Fix that up.
Since demos.h is now generated according to the platform for which GTK+ is
built, don't distribute it. Generate a Windows-specific demos.h.win32 and
distribute that instead, in which the Visual Studio build files will copy
it to demos.h, so that the build will proceed normally.
https://bugzilla.gnome.org/show_bug.cgi?id=749622
Add a destroy notify for the data of the callback, so we don't
end up leaving a dangling pointer behind for a short while if
the native engine is finalized before the simple one. This
was showing up as crash when typing and backspacing in the
search entry of the file chooser.
Implement the IsIndexed callback for tracker. This requires
reading settings of the tracker file miner. We are careful
to avoid a hard dependency on the tracker schemas.
Add a flag for recursive search, and implement non-recursive
search in both the tracker and simple search engines.
This is not currently used in the file chooser.
When the search engine provides hits with GFileInfo, use that
to add the hits to the model directly, without going through
another round of async get_info calls.
To do this, we add a batched variant of the
_gtk_file_system_model_update_file call that takes lists of
GFiles and GFileInfos. Again, we can avoid repeated resorting
that happens when the files are updated individually.
Add a batched version of gtk_file_system_model_add_and_query_file
that takes a list of files and avoids resorting the model for each
individual insertion. The querying is still done one-file-at-a-time,
so more optimization is certainly possible.
The old should_use_csd() function would return FALSE if the GTK_CSD
environment variable is unset; the change in commit c5e5ee6749
made it return TRUE if GTK_CSD is unset. This has a cascade effect
on the window size, which causes invalid rectangles to bubble down
to Pixman.
https://bugzilla.gnome.org/show_bug.cgi?id=751140
I was assuming that GtkVolumeButton and GtkScaleButton could only
contain a icon, now they get the image-button padding by default,
but if the text-button class is applied it is not overridden.
Use a revealer to manage the visibility of the header area where
we show the pathbar, the location entry or search. This is a bit
smoother, and makes search more similar to a search bar.
Popovers may be spawn when there's GTK+ grabs somewhere else (eg.
text selection popover/handles in an entry in a modal popover). When
this happens, events go to the grab widget (in this case the modal
popover) and are effectively ignored by the event widget, even though
it's can be conceptually a child of the grab widget.
To get away with this, tweak a bit gtk_main_do_event(), so events going
to popovers that are related to grab_widget or a child of it are received,
as it would happen with regular children of grab_widget.
https://bugzilla.gnome.org/show_bug.cgi?id=750993
This will be the widget that the popover relates to (::pointing-to in
GtkPopover, ::parent in GtkTextHandle).
Additional API to check the popover/parent relationship between widgets
has been added, which will be useful wherever this is necessary in a
generic manner.
https://bugzilla.gnome.org/show_bug.cgi?id=750993
A subsurface positioning operation only takes effect when the parent
surfaces state is applied. If a subsurface is mapped and positioned, but
the parent surface state is not immediately committed, the relative
position of the subsurface is undefined and may be placed incorrectly.
To avoid this undefined state, always request that the parent surface
should be committed after mapping a subsurface so that the position
operation will take effect.
https://bugzilla.gnome.org/show_bug.cgi?id=751098
GtkTreeView has a particularly expensive drawing path. This can cause
issues when part of animated widget sequences. Caching the content while
a model is attached helps reduce the number of full redraws during
exposure greatly.
https://bugzilla.gnome.org/show_bug.cgi?id=751082
Some widgets have very expensive drawing paths. So caching the content
can be useful even when not scrolling.
This can help speed up widgets that are part of animation sequences and
thereby go through spurious expose events.
https://bugzilla.gnome.org/show_bug.cgi?id=751082
Background patterns are often updated when style changes. In many cases,
the new pattern will match the previous. We can optimize out the
invalidation that will occur upon resetting the same pattern.
We were using GTkTreeView in a simple list. Also, as we know,
GtkCellRenderers are not the best way to theme and manipulate
widgets.
So instead use a GtkListBox to modernize the GtkPlacesSidebar,
and in the way clean up some parts of the code (like headings)
which were not used anymore.
Also we don't use a model anymore, since the data is simple
enough to manage it in a subclass of the row itself.
It is convenient to allow applications to show all the drop
targets at once. This improves the user experience with drag
an drop.
The new API allows the application to set the gtkplacessidebar
in a mode where invalid drop targets are insensitive and it
adds a "new bookmark" row. This mode is intended to be set
when the application is aware of a dnd operation and needs to
be stopped kwhen the application is aware that dnd operation
was cancelled or ended in a different part than gtkplacesisdebar.
The context parameter is unused in this patch, but will be
used in next patches when the sidebar will use a GtkListBox.
The reason of being unused now is just convenience.
https://bugzilla.gnome.org/show_bug.cgi?id=747793
GtkInspector is opening a separate display connection, which makes
it more likely that gtk_get_current_event() returns an event from
the "wrong" display.
We were getting ourselves in trouble by casting touch events
to GdkEventButton and poking directly at their internals. Instead,
use GdkEvent API to get what we need.
This fixes a crash when using the gear menu in epiphany with
touch. The same crash also occurred in testmenubutton.
An pass_through window is something you can draw in but does not
affect event handling. Normally if a window has with no event mask set
for a particular event then input events in it go to its parent window
(X11 semantics), whereas if pass_through is enabled the window below
the window will get the event. The later mode is useful when the
window is partially transparent. Note that an pass-through windows can
have child windows that are not pass-through so they can still get events
on some parts.
Semantically, this behaves the same as an regular window with
gdk_window_set_child_input_shapes() called on it (and re-called any
time a child is changed), but its far more efficient and easy to use.
This allows us to fix the testoverlay input stacking test.
https://bugzilla.gnome.org/show_bug.cgi?id=750568https://bugs.freedesktop.org/show_bug.cgi?id=90917
In this case we have a bunch of interactive main children
of the overlay, and then a centered overlay that contains both
non-interactive (labels) and interactive (entry) widgets.
This shows off a problem where the non-interactive parts (the labels)
steals input from the overlay main children (breaks button click and
hover effects).
https://bugzilla.gnome.org/show_bug.cgi?id=750568https://bugs.freedesktop.org/show_bug.cgi?id=90917
For functions that take state flags as an argument we need to special
case the situation where the passed in flags don't match the current
state.
Previously we would create a copy of the style info, change its state
and do the lookup from there.
Now that GtkCssNode has replaced style infos, this doesn't work as well
anymore as copying a GtkCssNode is not possible.
However, unike style infos, GtkCssNodes are instant-apply, so we don't
need to copy anymore, we can just change the state of the node.
This causes some invalidations to be queued, but we can take that
performance hit as this is fallback code.
https://bugzilla.redhat.com/show_bug.cgi?id=1228852
Instead of having padding outside the notebook containing
all pages, put each page in an extra box and add the padding
there. This is in preparation for allowing pages without
padding.
We can't add properties to the interface, since it breaks
3rd party implementations of the GtkFontChooser interface.
These exist, for example in gnumeric.
So, instead of a new property, add getter/setter vfuncs.
The font chooser delays creating the font description from the font face
as long as possible (it's slow). Because we use fixed height mode, we
only have to create font descriptions for rows we are actually going to
show.
This was achieved by looking at the font description column and if it
was NULL, we created a font description and gtk_list_stiore_set() it.
Unfortunately this caused a "row-changed" signal to be emitted and this
emission could happen during the cell data func.
And that caused infinite loops with accessibility when you were unlucky.
This change replaces the NULL font description with an empty one and
instead of setting the correct font description, we
pango_font_description_merge() it in. This way, the list store doesn't
change and no signals are emitted.
https://bugzilla.redhat.com/show_bug.cgi?id=1197267
Due to popover modality itself, there's quite high chances the popover
stealing focus has been triggered from within, so stay friendly to it.
Hiding the popover here will only hide the grabbing popover too if this
happens.
https://bugzilla.gnome.org/show_bug.cgi?id=750741
When recoloring symbolic SVG, do not modify the original width and
height of the passed-in file; the function later will scale the image
through gdk_pixbuf_new_from_stream_at_scale(), but we should still
use the original size to create the proxy SVG, or the image will
possibly be doubly-resized or blurry.
https://bugzilla.gnome.org/show_bug.cgi?id=750605
show_or_hide_handles() tries to disable visibility when the popover is
shown, although it triggers a bit late, and lets the handles flash briefly
if both popover and handles try to show at the same time (eg. when
pressing on the selection of a previously unfocused textview, the handles
were previously hidden, so they try to show again on focus in).
The handles might fall outside the visible area, and shouldn't be shown
then. Just call gtk_text_view_update_handles() which will perform these
checks, and keep the handle conveniently hidden.
This was leading to unexpectedly visible handles (and in the
wrong/previous position, the handle code doesn't relocate the widget
it's about to hide) when "select all" was selected in the popover on
a textview needing scrollbars.
and extending the selection beyond the view above and/or below.
The check used to hide the popover if the pointed area fell partly out of
the widget allocation, textviews now can trigger that with text selections
too close to the visible edge, as a small extra area around is now reserved.
The check has been changed to only hide the popover if the pointed area
falls completely outside the widget allocation.
The button and menu item icons settings are deprecated; application
developers should control whether or not a widget should show an icon,
using the existing API.
https://bugzilla.gnome.org/show_bug.cgi?id=750718
So objects connected by g_signal_connect_after actually get
the signal.
This was causing an issue in the dnd highlight, since there
a cairo rectangle is draw using g_signal_connect_after on the draw
signal.
If a menu was not attached to any widget, we try to calculate its
position given where the grabbed pointer is and what window has its
focus. Previously we failed to do so if a "transfer window" was used
for the grab, and this patch adds a code path that, if the menu window
itself didn't have the grab, look for the transfer window and get the
grab device from there.
https://bugzilla.gnome.org/show_bug.cgi?id=748951
If a position was already explicitly set, don't try to guess the
position of popup menus by looking at the pointer position, just use
the set coordinates.
https://bugzilla.gnome.org/show_bug.cgi?id=748951
According to the xdg-shell protocol specification the (x, y) coordinates
passed when creating a popup surface is relative to top left corner of
the parent surface, but prior to this patch, if the parent surface
was an xdg_surface, we'd position it relative to top left corner of the
window geometry of that xdg_surface.
https://bugzilla.gnome.org/show_bug.cgi?id=749717
When we are close the window edge, we need to shrink the 'invisible
border' around the handle to avoid mispositioning it. A fiddly
calculation, but it works.
The buttons on the popover where stealing the focus from the text
view on click, causing the popover to be dismissed before the action
was taken. Fix this by making the buttons not take focus on click.
The buttons on the popover where stealing the focus from the text
view on click, causing the popover to be dismissed before the action
was taken. Fix this by making the buttons not take focus on click.
- use dark theme assets for the checkboxes and radios
- darken the popover for legibility (white bg/black text is
really the most problematic background to have).
unfortunatley in terms of SCSS structure this is further digging us into the
hole of specificity. It would be much nicer to set the .osd class on the popover
and have everything just work. I'm sure we'll end up using OSD styled popovers
outside the touch context.
https://bugzilla.gnome.org/show_bug.cgi?id=750396
After the recent changes, we could end up calling
gtk_entry_update_handles in cases where the text_handle
has not be created (e.g. when dragging text from an entry).
Avoid that.
Also make them more scary so people really really don't use it as a
random knob when trying to make things go fast.
//bugzilla.gnome.org/show_bug.cgi?id=750505
The changes in commit 13e22e2030 made
_gtk_window_check_handle_wm_event() indirectly depend on
gtk_get_current_event_time() which relies on the current event being
available on the current_events stack.
Since the current event is only pushed on the stack afterwards we get
an invalid timestamp which breaks ewmh window moving.
This fixes the issue by pushing the current event before we start
relying on it being there in gtk_main_do_event() and, as a byproduct,
also fixes a potential memory leak when we have a rewritten event and
return early due to _gtk_window_check_handle_wm_event() being TRUE.
https://bugzilla.gnome.org/show_bug.cgi?id=750384
Use the drag-started signal to differentiate between drags that
move a handle and taps on a handle. Show the touch selection popup
for the latter, but not the former.
Hide the handles when the popover appears, and brind them back
when it disappears. This will need revisiting if we start using
the popover for mouse interaction as well, where we may not
want handles to show up.
We don't want the popup to appear spontaneously, so eventually
the timeout may go away altogether. For now, shorten it to 50ms,
to avoid rewriting all the places where the timeout is set or
unset.
Use the drag-started signal to differentiate between drags that
move a handle and taps on a handle. Show the touch selection popup
for the latter, but not the former.
Hide the handles when the popover appears, and brind them back
when it disappears. This will need revisiting if we start using
the popover for mouse interaction as well, where we may not
want handles to show up.
We don't want the popover to appear spontaneously, so eventually
the timeout may go away altogether. For now, shorten it to 50ms,
to avoid rewriting all the places where the timeout is set or
unset.
Add bold/italics/underline styling to the context menu of
the 'Lorem ipsum...' text view in page 1. The point is not
to show good UI for this kind of styling, but to demonstrate
custom actions in the context menu / touch selection.
Update style for touch selection in GtkEntry and GtkTextView
according to https://wiki.gnome.org/Design/OS/Selections
Add 'Select All' to the default actions, change actions
to use icons and move the popover to the bottom. If there is
no selection, just offer to paste.
Since nautilus merge, we were not showing 'Recent' in the sidebar
if GIO did not support the recent: scheme. But the file chooser
can show recent files independent of gvfs - it loads the recent
files manually. This is relevant on Windows and OS X, where gvfs
is typically not used.
This commit adds a show-recent property which can be used to override
the recent: scheme check. We use it in the file chooser.
https://bugzilla.gnome.org/show_bug.cgi?id=750068
- use consistent widget style. unfortunately using assets
- light/dark variant
- new assets for text selestions, using existing slider asset for
insertion point
https://bugzilla.gnome.org/show_bug.cgi?id=750396
We don't want scale marks to affect scale sizing and positioning,
so draw them inside the range recangle. This avoids size changes
for marks that don't have labels, at least.
https://bugzilla.gnome.org/show_bug.cgi?id=749650
The change in 03213b9509 changed the rules
as to when CSD can be enabled, but it also unconditionally enables CSD
with the implicit assumption that client-side shadows were the real
issue, and that we could work around that by drawing our own borders.
This also means that setting a titlebar for a GtkWindow will enable CSD
unconditionally.
In reality, some window managers (like Matchbox) *only* support
server-side decorations, and will ignore all hints to the contrary, to
the point of drawing decorations at random locations on top of the
window.
Since CSD are enabled unconditionally, the GTK_CSD environment variable
is also not a suitable escape hatch.
In the grand tradition of asking ourselves if we should do something
just because we can, we should split the environment checks from the
checks on what the user requested; by doing that, we can also check
when enabling client-side decorations, and ideally bail out if needed.
https://bugzilla.gnome.org/show_bug.cgi?id=750343
On wl_keyboard.key/modifiers, we're just forgetting about currently
pressed mouse buttons. Fix this by storing button and key modifiers
separately, and put these together when creating the GdkEvents.
Text insertion/pasting might trigger scroll, so we'd have to wait
until the text was revalidated and the scrolling truly happened
before we can check the new handle(s) position.
Nowadays (and for quite some years now) we rely on GdkEventGrabBroken
events to be received. This fake button event seems a remnant of
the early Gtk 2.x days, and is currently even inconsistent with our
event delivery model, so just remove it.
https://bugzilla.gnome.org/show_bug.cgi?id=749737
When recent files are not supported in gvfs, or turned off by
settings, we should not try to load them even if the startup
mode says so. This prevents inconsistency with the places
sidebar where 'Recent' will not appear in this case.
This applies the proper CSS child ordering semantics using GtkCssNode to
GtkListBox. You can now use :first-child, :last-child, :nth-child(), and
:last-nth-child() selectors.
For example, this allows styling row separators using CSS while ignoring
the separator on the last row.
GtkListBoxRow {
border-bottom: 1px solid @borders;
}
GtkListBoxRow:last-child {
border-bottom: none;
}
When the sort ordering of the listbox changes, we also update the CSS
node ordering.
When interpolating the stack size, we compute the current size by using
the prefered/minimum current size and the last size. We can't use the
last_visible_surface_allocation because that is not available until the
first _draw call and it doesn't include the child's margins.
the drag_begin() vmethod is meant for this, and the internal DnD code
will set up a drag icon if ::drag_begin didn't do so, which means
we are first getting a "default" icon, and then replacing it with the
text surface.
This is completely harmless in X11, but causes issues on wayland as
the DnD icon window is expected to remain unchanged during DnD there.
https://bugzilla.gnome.org/show_bug.cgi?id=748763
The drag destination might be empty, we shouldn't be checking whether
it contains pages at all. Instead, check the source notebook, which
ought to have a selected page if you're dragging something from there.
https://bugzilla.gnome.org/show_bug.cgi?id=749893
To generate the icon cache files.
We want to avoid a dependency loop if possible; additionally, on some
Debian-based systems gtk-update-icon-cache maps to the GTK2 version of
the utility and the GTK3 version is renamed to
gtk-update-icon-cache-3.0.
To avoid a build dependency on GTK2, use the binary that we just built
in-tree.
https://bugzilla.gnome.org/show_bug.cgi?id=749593
On some slower machines (e.g. an ARM OBS builder), this test is failing
with a race condition where we're trying to fetch the style before it's
applied.
https://bugzilla.gnome.org/show_bug.cgi?id=749593
gtk_tree_view_set_tooltip_column() specifies that markup in the text
should be escaped.
This fixes critical warnings when hovering over items in the sidebar for
bookmarks that have markup characters in their names.
https://bugzilla.gnome.org/show_bug.cgi?id=719683
The libinput driver will send a 0/0 scroll event on touchpads and other
devices where it knows scrolling stopped for sure. Use these events to
trigger kinetic scrolling from there.
The mechanism is similar to GtkGestureSwipe, we keep a backlog of the
latest dx/dy till a previous point in time, and calculate the final
velocities from there, with the difference we're dealing with scroll
units, and not pixel distances.
https://bugzilla.gnome.org/show_bug.cgi?id=749770
If a GtkScrolledWindow is just unmapped and promptly mapped again, the
indicators are left in a semi-visible state, so the GdkWindow isn't raised
properly above scrolledwindow content. This inconsistent state went away
the next time the indicator is hidden.
So, reset all state about indicator window visibility, animation
progress and conceil timer on ::unmap, this will be enough to make the
indicators start out hidden like on newly created scrolledwindows.
This patch introduces support for using the newly introduced
monitor objects in the XRandR protocol. These objects are meant
to be used to denote a set of rectangles representing a logical
monitor, and are used to hide details like monitor tiling and
virtual gpu outputs.
This uses the new objects instead of crtc/outputs objects when
they are available to create the monitor lists. X server 1.18
is required on the server side for randr 1.5.
https://bugzilla.gnome.org/show_bug.cgi?id=749561
Just use the last coordinates given on XdndPosition/drag_motion() in
order to trigger scrolling.
When running on Xwayland, the pointer position is unknown at this
stage on the X11 side, so the coordinates given here are bogus.
This change avoids both roundtrips and this situation.
https://bugzilla.gnome.org/show_bug.cgi?id=749679
Just use the last coordinates given on XdndPosition/drag_motion() in
order to trigger scrolling.
When running on Xwayland, the pointer position is unknown at this
stage on the X11 side, so the coordinates given here are bogus.
This change avoids both roundtrips and this situation.
https://bugzilla.gnome.org/show_bug.cgi?id=749679
Just use the last coordinates given on XdndPosition/drag_motion() in
order to trigger scrolling.
When running on Xwayland, the pointer position is unknown at this
stage on the X11 side, so the coordinates given here are bogus.
This change avoids both roundtrips and this situation.
https://bugzilla.gnome.org/show_bug.cgi?id=749679
Load themed cursors from the same places they are loaded on freedesktop systems,
but use W32 API functions to do so (works for .cur/.ani cursors instead of X
cursors).
Refactor the code for cursor handling. Prefer loading cursors by name.
Do not load actual cursors when loading the theme. Find the files and remember
the arguments/calls for loading them instead. Keeping HCURSOR instance in the
hashmap would result in multiple GdkCursors using the same HCURSOR. Given that
we use DestroyCursor() to off them, this would cause problems (at the very
least - DestroyCursor() would fail).
Store GdkCursor instances in a cache. Update cached cursors when theme changes.
Recognize "system" theme as a special (and default) case. When it is set,
prefer system cursors and fall back to Adwaita cursors and (as a last resort)
built-in X cursors. Otherwise prefer theme cursors and fall back to system and
X cursors.
Force GTK to use "left_ptr" cursor when no cursor is set. Using NULL makes
it use the system default "arrow", which is not the intended behaviour when
a non-system theme is selected.
Ignore cursor size setting and query the OS for the required cursor size, as
Windows (almost) does not allow setting cursors of arbitrary size.
https://bugzilla.gnome.org/show_bug.cgi?id=749287
In particular this means that cursors are disposed of by the way of
g_object_unref(), not DestroyCursor (which is documented to not to be
used on certain kinds of cursors, and we can't tell which is which).
It should also alleviate any concerns about destroying cursors that
are still in use by other windows, except for cases where we would
somehow get our hands on a HCURSOR that someone else is using and we
make a GdkCursor out of it and later unref and finalize it while it
is still in use.
It also removes the need to call CopyCursor(), which makes animated
cursors into non-animated ones as a side-effect (supposed to be a bug,
but try explaining that to MS). Now cursors should be animated (if
the are set up as such in the OS).
https://bugzilla.gnome.org/show_bug.cgi?id=697477
Some features need certain globals to initialize. In order to deal with
these dependencies, add a way to postpone closures that depend on a
certain set of globals, that later will be invoked when required
globals are all received.
https://bugzilla.gnome.org/show_bug.cgi?id=719819
Instead use asynchronous round trips that is synchronized in the end of
the initialization. This makes it easier to track state, as we won't
dispatch arbitrary Wayland messages while processing globals.
https://bugzilla.gnome.org/show_bug.cgi?id=719819
Even if a window doesn't support client side shadow
(gtk_window_supports_client_shadow returns FALSE), don't assume the
shadow width is zero, as CSD may have been enabled anyway (meaning
priv->client_decorated is TRUE). In that case we still need to report
the correct width.
https://bugzilla.gnome.org/show_bug.cgi?id=749451
Only "wait" and "all-scroll" are not implemented properly. OS X does not
seem to have a proper interface to either cursor. Approximations are used
instead; see the code.
See bug 749178.
Not everything has a replacement in the API, as the drawing model
changed considerably; nevertheless, this should help out developers
porting from the deprecated GtkStyle API.
It's now needed by gtk-launch, so it's just the case to enable it for all the
builds except the win32 one, instead of adding it for every unix backend.
https://bugzilla.gnome.org/show_bug.cgi?id=744086
Add parameter for specification of port to gtk_cups_connection_cups_new().
Use default port returned by ippPort() if the given port is lower than 0.
https://bugzilla.gnome.org/show_bug.cgi?id=693738
The ordering of globals in connection setup under weston
is different from mutter, and we end up creating a the
dnd window before any outputs are present. Don't cause
a critical warning in that case.
Even when the program itself calls gdk_set_program_class(). There's
currently no way for this function to be called without breaking gdk's
--class command line option, because you cannot call it before
gtk_init().
https://bugzilla.gnome.org/show_bug.cgi?id=747634
If CSD is enabled with shadow even though it "shouldn't"*, the width
should still be calculated correctly. This fixes a regression caused by
b1e5ad469c.
* gtk_window_should_use_csd () returns false
https://bugzilla.gnome.org/show_bug.cgi?id=748615
Synchronizing the visible child with the switcher's toggle buttons can
lead to GtkButton::clicked being emitted twice. Once for the button
that was active before, and once for the button that we just activated.
This leads to notify::visible-child being called twice and one of
them is with the wrong child.
Let's deal with this in the same way we handle the visible child
changing underneath us.
https://bugzilla.gnome.org/show_bug.cgi?id=749021
The window state 'client_decorated' will only be set the window is being
realized. If anyone tries to get the shadow size before that it'd get
the with as if there always was no shadow.
This avoids negative sized opaque regions caused by the allocation being
smaller than shadow.
https://bugzilla.gnome.org/show_bug.cgi?id=748615
If we have a GObject property that is also a GObject, we should be able
to view additional information on that object (even if the param spec
is read-only).
We were relying on indirectly getting notify when fontconfig
configuration changes, by GtkSettings translating the timestamp
change into a style-invalidation, which gets fed through the
css invalidation machinery. That machinery has gotten good enough
at optimizing away redundant changes that it no longer emits
::style-updated in this case.
So, instead make the font chooser listen directly to what it
cares about: the fontconfig change notification from GtkSettings.
We can use the GtkSettings:gtk-fontconfig-timestamp property to decide
whether or not we should reload fonts on style and screen changes. This
should avoid doing a lot of work with large font collections when only
the theme has changed.
https://bugzilla.gnome.org/show_bug.cgi?id=748782
This is purely to support gdk_cursor_new_from_name().
In particular, its counterpart, gdk_cursor_new_for_display(), will not
be affected, because there's no GDK_LEFT_PTR_WATCH cursor type,
and because i don't have a fallback cursor bitmask for gdk/win32/xcursors.h
Add a new API, gtk_popover_set_default_widget, that can be
used to make a widget act as default while the popover is
shown. This is useful in dialog-like popovers.
http://bugzilla.gnome.org/show_bug.cgi?id=747664
We interpret buttons 4-7 as old-school scroll events, so it does
not make sense to add these to the mask. Also fix an off-by-one
in the loop here, buttons_mask is 1-based.
Making a container focusable is rarely the right thing to do.
It typically breaks the focus chain, and makes the container
contents unfocusable, as was the case here.
We have a number of cases where properties should have their
default value overridden in a subclass, but haven't because thats
annoying to do. We also have properties where the absence of
an explicit value has context-dependent meaning.
Add a list of exceptions for these cases.
The previous commit removed default-valued properties,
but apparently that has a negative effect for grid
packing properties, so put the explicit value back.
Just using tracker does not work well if you are searching in
non-indexed locations, such as git checkouts or network mounts.
Ideally, we'd decide the 'best' engine to use for each location.
Since that is not easy to do, just run them in parallel for now,
which is the same strategy that nautilus uses.
We now have proper checks for gdk_screen_is_composited() and a proper
implementation for gdk_screen_get_rgba_visual() for Windows, so we
can remove the comments in this file stating that they aren't
available for Windows.
Catch an error that indicates the file looks like a template,
and then try again, this time with the template parsing API
of GtkBuilder. This is a little iffy, since we need to create
a 'fake' type and instance to pass in, but it works ok in
simple tests.
Add the class and parent class name to the error message.
gtk-builder-tool will parse the error message and use the
class names for trying again to parse the file as a template.
I was getting really weird values for scale for the blank cursor used
when hiding the cursor in a GtkEntry when typing, this was caused
by gdk_wayland_device_update_window_cursor sending random values
when the returned buffer was NULL.
We fix this by just not sending any buffer or scale updates in this
case.
Requires Vista and newer.
* Create surfaces with cairo_win32_surface_create_with_format
* Provide an rgba visual that can be distinguished from the system visual
* Make rgba visual the best available visual
* Enable alpha-transparency for all windows that we control
* Check for appropriate cairo capabilities at configure time
(W32 - 1.14.3 newer than 2015-04-14; others - 1.14.0)
* Check for composition support before enabling CSDs
* Re-enable transparency on WM_DWMCOMPOSITIONCHANGED
Windows that were created while composition was enabled and that were CSDed
as a result and will look ugly (thick black borders or no borders at all) once
composition is disabled.
If composition is enabled afterwards, they will return back to normal.
This happens, for example, when RDP session is opened to a desktop where a GTK
application is running. For W7/Vista windows will only re-gain transparency after
the RDP session is closed. For W8 transparency will only be gone momentarily.
Windows that were created while composition was disabled will not be CSDed
automatically and will use SSD (WM decorations), while windows that are CSDed
manually will get a thin square border.
If composition is enabled afterwards, these windows will not change.
This is most noticeable for system menus (popup menus are often generated
on the fly, system menus are created once) and some dialogues (About dialogue,
for example).
https://bugzilla.gnome.org/show_bug.cgi?id=727316
Without this change, out-of-tree distcheck doesn't get very far.
Similarly, allow *.vcxproj, *.props to be in either the builddir or
the srcdir.
Finally, since I'm touching these lines anyway, eliminate some
useless uses of cat: "cat x | sed 's/foo/bar/' > y" is
equivalent to "sed 's/foo/bar/' < x > y".
Bug: https://bugzilla.gnome.org/show_bug.cgi?id=748176
Reviewed-by: Chun-wei Fan <fanchunwei@src.gnome.org>
Add a convenience function that is like gtk_builder_get_object()
but stashes away a GError if a lookup fails. To make the error
message informative, the function takes a line/column pair.
Doing things this way is necessary because the custom_tag_end,
custom_finished, and parser_finished vfuncs don't take a
GError parameter, despite being called from a place where
we can report a GError back.
GdkKeymap already has support for _get_num_lock_state() and
_get_caps_lock_state(). Adding _get_scroll_lock_state() would be good
for completness and some backends (Windows?) could take advantage of
this.
We want to clear the style property cache whenever things change in the
tree, not as we previously did only when those changes actually lead to
a different CSS style.
isatty() on MSYS2 returns non-zero if the fd is stdout and is redirected
to /dev/null. That lets xgettext to produce colorized output and leads
to an assertion failure during terminal type detection.
Although the problem should be fixed in MSYS2, isatty() could behave
wrongly in many ways on Windows. Since gtk+ doesn't need colorized
output, it would be safer to bypass the terminal dependent code.
See also:
https://lists.gnu.org/archive/html/bug-gettext/2015-04/msg00004.htmlhttps://bugzilla.gnome.org/show_bug.cgi?id=748346
Instead of issuing g_warning, fill the provided GError.
This lets us test this error handling, and is the right
thing to do. Use the new GtkBuilder helpers and
g_markup_collect_attributes to do so.
Instead of issuing g_warning, fill the provided GError.
This lets us test this error handling, and is the right
thing to do. Use the new GtkBuilder helpers and
g_markup_collect_attributes to do so.
Instead of issuing g_warning, fill the provided GError.
This lets us test this error handling, and is the right
thing to do. Use the new GtkBuilder helpers and
g_markup_collect_attributes to do so.
Instead of issuing g_warning, fill the provided GError.
This lets us test this error handling, and is the right
thing to do. Use the new GtkBuilder helpers and
g_markup_collect_attributes to do so.
Instead of issuing g_warning, fill the provided GError.
This lets us test this error handling, and is the right
thing to do. Use the new GtkBuilder helpers and
g_markup_collect_attributes to do so.
Instead of issuing g_warning, fill the provided GError.
This lets us test this error handling, and is the right
thing to do. Use the new GtkBuilder helpers and
g_markup_collect_attributes to do so.
Instead of issuing g_warning, fill the provided GError.
This lets us test this error handling, and is the right
thing to do. Use the new GtkBuilder helpers and
g_markup_collect_attributes to do so.
Instead of issuing g_warning, fill the provided GError.
This lets us test this error handling, and is the right
thing to do. Use the new GtkBuilder helpers and
g_markup_collect_attributes to do so.
Instead of issuing g_warning, fill the provided GError.
This lets us test this error handling, and is the right
thing to do. Use the new GtkBuilder helpers and
g_markup_collect_attributes to do so.
Instead of issuing g_warning, fill the provided GError.
This lets us test this error handling, and is the right
thing to do. Use the new GtkBuilder helpers and
g_markup_collect_attributes to do so.
Instead of issuing g_warning, fill the provided GError.
This lets us test this error handling, and is the right
thing to do. Use the new GtkBuilder helpers and
g_markup_collect_attributes to do so.
Instead of issuing g_warning, fill the provided GError.
This lets us test this error handling, and is the right
thing to do. Use the new GtkBuilder helpers and
g_markup_collect_attributes to do so.
Add two new requests to the gtk_surface interface: set_modal and
unset_modal. The server will currently not do anything special with
input focus, and its up to the client to ignore events on the parent
surface.
This commit bumps the gtk_shell interface version to 2. By connecting to
a Wayland server with another gtk_shell interface version any features
depending on the gtk_shell protocol will not be available.
https://bugzilla.gnome.org/show_bug.cgi?id=745721
cairo_rectangle_int_t was replaced by GdkRectangle in commit
552c29b488, but the type of the pointing-to
property was not changed.
To avoid breaking old code that sets or gets the property with a GValue
of type CAIRO_GOBJECT_TYPE_RECTANGLE_INT, transformation functions between
CAIRO_GOBJECT_TYPE_RECTANGLE_INT and GDK_TYPE_RECTANGLE are registered on
the first call to gdk_rectangle_get_type().
https://bugzilla.gnome.org/show_bug.cgi?id=723394
gdk_wayland_drop_context_set_status() can't do much else currently besides
picking a mimetype (the first one is currently chosen). This may incorrectly
unset the mimetype chosen on .receive(), so the transfer is cancelled before
it even starts.
At the time drop_reply happens, we should have already picked a mimetype
along the way, so only cover for accepted=FALSE in order to unset it.
During drag operations from another client, we currently set no window as
the DnD source. There's paths in upper layers though that rely on it being
set, just that we don't trigger these yet.
Make use of pattern rules when generating the Visual Studio 2012/2013
Projects from the Visual Studio 2010 projects, which will help to clean up
the file and also avoid problems when running items like 'make -jN dist'.
This reverts commit 24d3f3fcb2.
Sorry, I am going to re-commit this very shortly with a new
commit message, as I found the commit message to be quite
wrong and misleading.
The current GdkScreen->is_composited() is a stub as we were having Windows
XP being supported, which does not support Desktop Window Manager (DWM),
which is used by Windows for composition.
Windows Vista and later support DWM, and it is always enabled on Windows 8/
Server 2012 and later.
Please note that as we are dropping XP support in this cycle, this is the
commit that would say goodbye to Windows XP support for GTK+-3.x, by
linking directly to dwmapi.dll. This means, we only check whether we are
on Windows 8 or Server 2012 (or later) to see whether we unconditionally
have composition enabled.
https://bugzilla.gnome.org/show_bug.cgi?id=741849
To calculate the shadow width, we look at the value of priv->fullscreen
and priv->maximized.
Those fields will have the actual value only after GTK receives back a
window state event though, so they will be wrong in _realize(). Look at
priv->fullscreen_initially and priv->maximize_initially too, to avoid
the size changing right after realize, which would make the window
flicker if maximized at startup.
https://bugzilla.gnome.org/show_bug.cgi?id=747808
Libinput will use 0.0f on the "scrolling finished" event, so check for this
instead of rounding (<1 values are sort of frequent on touchpads). This
impedes bug #745315 to resurface after commit d563b943ed.
When the scrolledwindow receives scroll events, it ensures the timeout to
maybe start the "snap back to edges" animation is reset, but it does nothing
about the animation source. It must be reset just the same, to maybe be
started after the timeout fires up.
Added another :not() to fix the first and last swatches in the
first section of colorpicker.
Dodge the artifacts due to stacked anti-aliased rounded corners by
increasing the radius of the base object by 1px.
We were only updating window buttons when the headerbar was
a direct child of the window. That is not the case in more
complicated situations, such as the split headers in gedit
or polari. To fix such cases, make the headerbar itself listen
for state changes on its toplevel.
https://bugzilla.gnome.org/show_bug.cgi?id=747805
This used to do the right thing, practically ignoring those event
if they went all through the event handler, unless this motion event
triggered the cancellation of this gesture from the event handler
of another controllers.
In this case, the controller would be reset, but the motion event
would still go through its handler, setting again
current_button/sequence as the motion event has buttons in its
modifiers. This leaves GtkGestureSingle with inconsistent data
that may interfere with future runs.
https://bugzilla.gnome.org/show_bug.cgi?id=747469
The code managing scrollbars visibility was too pervasively checking for
mouse devices, leaving pen/eraser/cursor devices with no scrollbars at
all. Relax these checks a bit, and actually toggle full-width scrollbars
on pen/eraser devices, so it is an easier target.
https://bugzilla.gnome.org/show_bug.cgi?id=747608
XSetWindowBackgroundPixmap() will throw BadMatch only in the case of a
different parent window depth. Different visuals are fine and actually
expected in Gtk+ 3.16 (since we don't stick to the system default visual
but try to pick a better one).
https://bugzilla.gnome.org/show_bug.cgi?id=747524
Since windows can be intermediate containers this is somewhat redundant,
plus gtk_window_size_allocate() will do additional things like allocating
the popovers, which was mistakenly skipped by local plugs not chaining up.
https://bugzilla.gnome.org/show_bug.cgi?id=747553
This is a workaround for atspi-atk behaviour.
atspi-atk uses signal emission hooks. So it to already catches
signal emissions on creation of objects, before anyone could even
think of g_signal_connect()ing.
https://bugzilla.gnome.org/show_bug.cgi?id=746706
gtk_application_shutdown clears the impl member, so all
callbacks, signal handlers, etc that might still be triggered
between a shutdown call and the return from the mainloop
better be prepared to deal with impl being NULL.
strcasecmp() is unfortunately not universally available, along with
strings.h. Fix the build by replacing strcasecmp() with
g_ascii_strcasecmp(), and remove the strings.h include.
https://bugzilla.gnome.org/show_bug.cgi?id=747604
When we open the connection, we get the wl_output object,
but we return before all the information such as monitor
geometry has arrived, which causes us to misinform early
users of this information. Do a roundtrip here that causes
us to wait until the information is complete. Do the same
for seats, just in case.
https://bugzilla.gnome.org/show_bug.cgi?id=747471
When a treeview is destroyed while rubberbanding is going
on, we crash because the rb tree is nuked before we want
to access it to stop the rubberbanding. To avoid this crash
end the rubberbanding early in destroy().
See
https://bugzilla.redhat.com/show_bug.cgi?id=1173904
It can apparently happen that we get focus in events
on windows after gtk_application_shutdown() has been
called. Avoid an unnecessary crash in this case.
See
https://bugzilla.redhat.com/show_bug.cgi?id=1176339
The coordinate translations here were not working properly
for window widgets inside the scrolled window, as can be
seen e.g. for the horizontal scrollbar of the 'Tree View'
example in gtk3-demo.
https://bugzilla.gnome.org/show_bug.cgi?id=747406
When moving over a non-expanded indicator from the outside, we were
not expanding it, due to on_scrollbar being true. This can be seen
e.g. when moving from the content pane over to the sidebar indicator
in gtk3-demo. We must still ensure that the indicator is expanded
when receiving motion events over the indicator.
https://bugzilla.gnome.org/show_bug.cgi?id=747407
The gtk_label_set_text() and gtk_label_set_markup() functions have
various side effects that ought to be documented, especially for
non-C developers using properties directly.
https://bugzilla.gnome.org/show_bug.cgi?id=747121
Use cursor names instead of font cursors, so we can also show
cursors that are not represented in the X cursor font and thus
don't have a value in the GdkCursorType enumeration.
This path is only intended to be triggered on events directed towards the
child of the scrolledwindow, so make it explicitly so. This avoids scrollbar
"over" state flashing when dragging finishes within the slider.
https://bugzilla.gnome.org/show_bug.cgi?id=746961
The "app_id" of a xdg_surface should be the ID that can potentially be
used to get the DBUS name or the .desktop file.
For GtkApplication programs this is often the ID passed when creating the
GtkApplication object, so when available lets use that.
As fallbacks, first try g_get_prgname as it often corresponds to the
basename part of the .dektop file for non-GtkApplication programs.
Otherwise use gdk_get_program_class, even though that string usually
doesn't conform to the expectations of xdg_surface.set_application_id.
https://bugzilla.gnome.org/show_bug.cgi?id=746435
If the icon happened to come from the drag site icon helper (ie. set through
gtk_drag_source_set_icon*), it would be referenced on the GtkDragInfo,
but not hooked into its context. This results on non visible drag windows,
until set_icon_helper() happened to be called on some path.
GtkRadioButton had a deficient copy of the focus sort code
in GtkContainer, causing focus to jump over the next button
in the list. Just use _gtk_container_focus_sort() here,
which fixes the bug _and_ saves 80 lines of code.
https://bugzilla.gnome.org/show_bug.cgi?id=746817
As of 74405cc, progress bars use a new design with values drawn on top
(or to the left) of the through instead of inside of it. This change
brought a number of regressions: the min-horizontal-bar-height and
min-vertical-bar-width style properties are not respected anymore. For
vertical progress bars, the value was drawn too close to the bar and not
centered vertically.
Fix this by respecting the style properties and drawing the value label
at the correct position.
Also, the xspacing and yspacing properties didn't server any apparent
purpose. Change their semantics to mean "the spacing between the label
and the bar". Hence, they only need to be added to the size request when
showing the label. Since we are changing semantics anyway, reduce their
default values from 7 to 2, to avoid and excessive gap.
https://bugzilla.gnome.org/show_bug.cgi?id=746688
Make it possible to control libcanberra support so we don't risk ending up with
a cyclic dependency when using packages: gtk+ -> libcanberra-gtk3 -> gtk+
https://bugzilla.gnome.org/show_bug.cgi?id=746904
As it is, GtkListBox model binding will work nicely as long as your
create_widget_func returns a floating reference on the newly-created
widget.
If you try to return a full reference (as any higher-level language
would do) then you will leak that reference.
Fix that up by converting any floating references into full references
and then unconditionally releasing the full reference after adding to
the box.
https://bugzilla.gnome.org/show_bug.cgi?id=746893
If the GLX_EXT_texture_from_pixmap extension is not available when we
did the extensions check, then there's no point in using the backend
specific code paths that rely on it.
Use screen workarea to *also* set the position of a maximized window,
not just its size. Without this the window position defaults to 0:0
(the topleft corner), which is wrong when taskbar is position along the
top or left edge of the screen.
https://bugzilla.gnome.org/show_bug.cgi?id=746821
I managed to stall recent files today while trying to save a GTK
testcase in glade that contained enough spinning spinners that the CPU
was saturated just redrawing things.
I had to navigate the filesystem!
The direction in which the slider moves can be inverted by setting the
inverted property. But the draw method does not check this, instead it
checks if the direction of the widget is set to be right to left.
Call the should_invert function in order to determine if the direction
of the range should be inverted. It too checks the widget's direction,
but also checks the "inverted" property, and allows the range to be
drawn inverted even if it is vertically oriented.
https://bugzilla.gnome.org/show_bug.cgi?id=746712
Put the equality check in front. This allows better detection of when an
insert or delete needs to be emitted.
Also, only emit text-changed:delete if the deleted text is not the empty
string. Only emit text-changed:insert if the inserted text is not the
empty string.
https://bugzilla.gnome.org/show_bug.cgi?id=746706
Compute the new text and its length in advance. This way those
computations will not confuse us when they happen in the middle of the
actual action.
https://bugzilla.gnome.org/show_bug.cgi?id=746706
Compute the proportion of the range that should be filled to match the
fill level, and use it to compute the starting point and length of the
area between the slider and the fill level.
https://bugzilla.gnome.org/show_bug.cgi?id=734741
When recomputing CSS, we need a correct widget path in the fallback mode
where we're still using widget paths.
So we need to invalidate it everytime it actually changes, and not just
when emitting the style-updated signal.
Fixes css-match-regions reftest.
Clang complains that this check can never be true. Since this
is a argument range check which we do to catch bad input,
convince clang to not complain instead of taking it out.
clang complains that the expression involving sqrt() is not
constant, and thus refuses to accept it as a case label. So,
use precomputed values instead.
https://bugzilla.gnome.org/show_bug.cgi?id=746468
Break out a setter that manages the weak pointer, and
use it in finalize. This also fixes a bug where we were
forgetting to disconnect the right signal handler in
some cases.
The other Radio* widgets have this convenience method that removes the
memory management of the opaque GSList used to handle the group from the
API usable from language bindings (especially the ones not based on
introspection).
This commit adds gtk_radio_menu_item_join_group().
https://bugzilla.gnome.org/show_bug.cgi?id=671362
Some arguments, like the group and the label of a RadioMenuItem, can be
NULL: the RadioMenuItem has all the code to deal with them. The argument
validation is too strict, though, for instance doing:
return_if_fail (IS_RADIO_MENU_ITEM (foo))
if (foo != NULL)
set_foo (foo)
Which is obviously incorrect.
This commit also modifies the annotations of the API, to ensure that
language bindings do the right thing.
https://bugzilla.gnome.org/show_bug.cgi?id=671362
If we create a RadioMenuItem without a group, and then set a group, the
menu item will still be set as active, which means an inconsistently
drawn radio menu item - as the RadioMenuItem will set the active flag on
itself, but then it won't reset it when it gets a new group.
https://bugzilla.gnome.org/show_bug.cgi?id=671362
It turned out that using mwm hints to instruct wms to
create border-only decorations is not really working
universally. So, instead of doing this, render a solid
frame without shadow on the client-side to handle this
case.
https://bugzilla.gnome.org/show_bug.cgi?id=746222
Signed-off-by: Olivier Fourdan <fourdan@xfce.org>
If the widget has been destroyed since a DBus message had been sent,
we could be in a condition that the widget pointer exists but it does
not have a window.
This bails as if the widget didn't exist if there is no available
GdkWindow.
We also set the extents to 0 to be defensive since this is a vfunc
implementation.
https://bugzilla.gnome.org/show_bug.cgi?id=746586
Since these part really are the same in all of the x or y direction
and we don't blur in that direction we can just blur one line and
repeat it during drawing.
https://bugzilla.gnome.org/show_bug.cgi?id=746468
There is no need to e.g. blur in the x-direction for the top part
of a box shadow. Also, there is no need to extend the mask in the
non-blurred direction.
https://bugzilla.gnome.org/show_bug.cgi?id=746468
For radius 1px the current implementation rounds down to a 1 px box
filter which is a no-op. Rather than creating useless shadow masks
in this case we bail out blurring early.
Another alternative would be to make radius 1px round up to a 2 px box
filter, but that would change the rendering of Adwaita which is probably
not a great idea this late in the cycle.
https://bugzilla.gnome.org/show_bug.cgi?id=746468
gtk-reftest already had an --output=DIR option to tell it where
to save all the resulting images. Now you can combine this with
the --compare-with=DIR option in a second run to make gtk-reftest
compare the .out.png files from the first run with the .out.png
files of the current run, instead of producing .ref.png files.
The intended use for this is to verify that changes do not affect
the generated output.
During copy/paste, it may be common that we receive several property changes
around the selection atom, this results in warnings when cancelling the previous
write attempt. We already honor the last request properly, so we should just
cancel silently.
Sometimes path nodes can survive longer than the style context that
created them. Don't crash in those cases.
Fixes startup of mutter.
Testcase included.
https://bugzilla.gnome.org/show_bug.cgi?id=746407
This allows monitoring the CSS tree. For now, moving a child to a
different position relative to its siblings while keeping the same
parent will cause a child-added + child-removed emission.
We need to properly track if a node needs to propagate invalidation
state information to its children. We didn't do this properly before and
that could lead to us forgetting to invalidate nodes in corner cases.
Do not propagate the TIMESTAMP change through the node tree, as that
causes lots of uneeded markings of nodes as invalid.
Instead, walk the node tree and find the nodes that have a non-static
style and only invalidate timestamps on those.
Only invalidate timestamps if the node is marked as invalid. We overload
the meaning of "invalid" as "tracks timestamps".
While I don't like the way this is written, it is an important
optimization because 95+% of nodes don't animate so timestamps don't
matter to them. But timestamps are invalidated 60x per second.
We don't return a NULL style to mean "no changes" anymore, instead
we check new_style == old_style to mean that.
Make sure the code reflects this, otherwise we'll send
GTK_CSS_CHANGE_PARENT_STYLE invalidations everywhere and screw up
performance.
Now that the widget node recomputes styles on update_style() we can just
call it during validate(). That way, we don't need the widget node to
manually compute its style.
If CSS values are queried from a widget, recompute them if necessary. Do
not emit style-updated until the validation phase however.
This way, we don't run into performance traps when style-update causes
invalidations that cause new style-updated to be emitted.
... and pass it to the API that computes new styles.
A special timestamp of 0 means "please don't animate" and is used when
no frame clock is available for a node.
This is mainly an attempt to merge the update_style() and validte()
vfuncs. Code is not there yet, but that's the idea.
Also, gtk_css_node_set_style() should not be public. And this gets
closer to that goal, too.
After measuring it, I realized the optimization never triggers for
Adwaita and rarely ever triggers for simple themes. So it is not
useful to keep it around.
This allows adding more API for it.
It also includes code that tracks modifications and invalidates siblings
and their positions whenever nodes get added or removed.
If we know the parent's get_path_for_child() implementation is safe to
be used with GtkCssNode because it doesn't do anything special, we do
that. Unfortunately that requires whitelisting vfuncs because the vfunc
is public API so anyone can override it.
Instead, use gtk_widget_get_path() which makes GtkWidget cache the path.
This is a temporary solution until we can get rid of widget paths.
This increases memory usage quite noticably.
The node declaration has the same functionality as
gtk_css_node_declaration_add_to_widget_path(). So instead of using that
function on a path, you can use the original path and the declaration in
a matcher.
So far the vfunc is kinda quirky (the path argument is an out argument
for something you have to free when you're done with the matcher), but
I'm about to change that.
We don't want to add the current classes to the widget path - which
might potentially be different after a gtk_style_context_save() - but
the root node's ones. So what better thing to do than actually using the
root node?
Instead of directly requesting the layout phase, register a tick
callback. This is what the docs suggest for animations and it's what we
need for the next commit.
... to a bunch of functions.
This requires a tiny change to the heuristics for the style cache - we
now cache styles when they have the same style provider as their parent
instead of when they have the default provider - but that change doesn't
have any effect in practice.
The parent refs the child, so gtk_css_node_set_parent() adds/removes a
reference.
We should probably refactor this so that we name the function
parent.add(node) instead of node.set_parent(parent) - makes the
refcounting more clear.
Instead of passing the style declaration, take the node's style
declaration. Add arguments to allow overriding the state for the one
case where this didn't work.
The code is confusing the stylecontext=>node transition, so I'll remove
it.
WIth the recent introduction of the parent style cachen, I'm not sure
it's worth it at all. Some crude benchmarking suggests a slight speedup
when removing the cache.
So no guarantees about adding it back later.
- GtkCssWidgetNode
for style contexts owned by a widget
- GtkCssPathNode
for style contexts using a GtkWidgetPath
- GtkCssTransientNode
for nodes created with gtk_style_context_save()/restore()
The functionality of it is supposed to grow, so better put it in a
custom file early.
This is just a naive split so far, the next patches will split things
further.
The wl_data_source may be the clipboard's. Looking up the drag context in
order to get the display isn't going to fare well there. So, just use the
default display, and only look up the drag context when we know we need it.
https://bugzilla.gnome.org/show_bug.cgi?id=746386
This commit adds the GtkTextTag:underline-rgba and :strikethrough-rgba
properties and the necessary plumbing to apply these colors in GtkTextLayout.
With this change, you can alter the color of underlines including those
of type PANGO_UNDERLINE_ERROR.
You might want to alter the underline color to differentiate between
spelling and grammer mistakes. In code editors, it is convenient to
differentiate between errors and warnings.
Note that the GtkTextAppearance struct is public ABI and has no spare
room for new fields, so we are resorting to some tricky packing to store
the colors in the unused pixel field of the fg_color and bg_color structs.
This packing is accomplished by the macros in gtktextattributesprivate.h.
Signed-off-by: Christian Hergert <christian@hergert.me>
https://bugzilla.gnome.org/show_bug.cgi?id=402168
It has been a long-standing request to interpret scroll events
with Shift held down as horizontal instead of vertical, and
some applications are already doing this on their own.
https://bugzilla.gnome.org/show_bug.cgi?id=132197
This causes pixman warnings, or worse.
Clearly, something is not quite right here, if we end up
redrawing tabs at a time when the allocation is set to (1, 1).
For now, avoid straining the error handling in the lower layers.
https://bugzilla.gnome.org/show_bug.cgi?id=746301
On popover_unmap(), perform the gtk_widget_unmap() call last, so the
GtkWindowPopover data is ensured to be alive throughout the function
if the popover widget is destroyed right on ::unmap.
https://bugzilla.gnome.org/show_bug.cgi?id=745829
This ensures the widget data stays live long enough to perform invariants
check after emission if the widget happens to be destroyed on a callback.
https://bugzilla.gnome.org/show_bug.cgi?id=745829
We are testing -gtk-icon-style and assume the theme doesn't touch it.
But HighContrast forces symbolic icons. And that breaks the reference
images.
So explicitly set "requested" for everything.
Support scaling of cursors created from themes. The default scale is
always 1, but if the pointer cursor surface enters an output with a
higher scale, load the larger version of the cursor theme and use the
image from that theme.
This assumes the theme size is set to one that fits with an output scale
= 1.
https://bugzilla.gnome.org/show_bug.cgi?id=746141
The setting of the the surface scale even when the surface is not
created from a surface was introduced due to a crash when getting the
buffers when dividing by the scale. The only reason I can see this is
that we get the buffer from a non-existing surface when the wl_cursor
has not yet been set.
Instead, use the name field to avoid trying to use the non-existing
surface, effectively avoiding the division-by-zero that way.
https://bugzilla.gnome.org/show_bug.cgi?id=746141
`bundle install` command on fedora 21 was failing
with following message:
Your Gemfile has no gem server sources. If you need
gems that are not already on your machine, add a line
like this to your Gemfile:
source 'https://rubygems.org'
After adding that line it worked again.
https://bugzilla.gnome.org/show_bug.cgi?id=746205
With the 3.0 transition, this code went from just querying the entry's
height request to doing a full size request.
Then it got code to revert the features that a full size request does.
And then it grew code that manually computed the baseline.
Avoid this and just do what happened back in the days: Do a regular
height request.
This changes the semantics of the get_frame_size() vfunc wrt its
behavior towards subclasses overwriting the get_height() vfuncs, but I'm
happy to live with that.
Applications forget to set the follow-state property and then some
themes used a style where normal symbolic icons have the same color as
prelit or selected backgrounds and that suddenly made icons invisible
and who wants that?
https://bugzilla.gnome.org/show_bug.cgi?id=746201
Rework the way we assign an accessible name to menu buttons,
to make sure we pick up a label, should the button contain
one, and only override the name with "Menu" as a fallback.
It seems to be buggy in ways that make the test fail
with a critical when the test bus is brought down.
At the same time, drop manual settings of environment
variables that we can set globally.
This reverts commit 63f59dde3a.
It turns out, the state was not just necessary for style computation,
but also for tracking RTL and LTR. And so it broke the reftests.
gtk_tree_selection_real_modify_range() has a g_return_if_fail() if the
start or end paths passed to it do not correspond to real tree nodes.
However, GtkTreePaths inherently do not have to be valid, so it should
be acceptable to call gtk_tree_selection_select_range() with
non-existent paths. Replace the g_return_if_fail() by a silent return,
and add a unit test.
https://bugzilla.gnome.org/show_bug.cgi?id=712760
The gtk-shell Wayland protocol extension is not meant to be backward
compatible right now, so avoid binding to any version that is not the
one supported.
https://bugzilla.gnome.org/show_bug.cgi?id=745721
We need to filter out platform-specific sources from the files that we
use with the introspection scanner.
In this specific case I could have moved the gtkclipboard-quartz.c and
the gtkdnd-quartz.c files out of the $(gtk_base_c_sources) variable, but
doing a filter-out on the variable itself is more resilient in case we
eventually add files and we forget about the result.
Now that this is split in two separate gestures, both must be reset
when the WM grabs the pointer. Also, do on resize drags like on move
drags, and claim the gesture before resetting, so the ownership is
properly transferred across any other widgets.
https://bugzilla.gnome.org/show_bug.cgi?id=745969
gtk_entry_set_completion() (and _gtk_entry_completion_connect underneath)
may happen when the entry has no toplevel yet. This window acts as the
"parent" for subsurface windows on wayland, and is indispensable to create
its backing wl_subsurface, so this resulted in non-visible popups there.
Fix this by ensuring transient_for is set before showing the popup.
https://bugzilla.gnome.org/show_bug.cgi?id=745463
This reverts commit fb9a6bb6d8.
In a recent test, I've found that Xfce and Mate now support
this, so they will not be affected by this requirement. And
adding the check back will solve the 'client-side shadow'
problem in KDE.
The page_setup of a GtkPrintContext or GtkPrintUnixDialog is nullable,
so all reference count changes to it have to be guarded against NULL
values.
Found by scan-build.
https://bugzilla.gnome.org/show_bug.cgi?id=712760
_gtk_rbtree_first() can potentially return NULL if the RB tree is empty,
which would result in NULL pointer dereferences in the GtkTreeSelection
code. Gracefully handle them.
Found by scan-build.
https://bugzilla.gnome.org/show_bug.cgi?id=712760
These vfuncs cannot be NULL: implementations are provided by GtkEntry,
and subclasses should not set them to NULL. Instead of conditionalising
the calls to the vfuncs, assert that they’re set and call them
unconditionally.
This prevents the possibility of a subclass setting the vfunc to NULL
and then a gtk_entry_get_*_size() call returning undefined values in its
out variables.
https://bugzilla.gnome.org/show_bug.cgi?id=712760
gdk_window_ensure_native() can end up with a NULL parent pointer, which
it passes to find_native_parent_above()…but that expects a non-NULL
parent.
Found with scan-build.
https://bugzilla.gnome.org/show_bug.cgi?id=712760
If auth_info_required is only set to "negotiate" the
request password dialog is shown anyway for each print
job without any input fields. As the request_password
dialog only handles username, password and domain.
https://bugzilla.gnome.org/show_bug.cgi?id=669008
They are a bit terse, and they should point to the preferred way of
overriding the theme, i.e. using a GtkStyleProvider for your
application, and custom style classes.
When the scrollbars are overlayed, the size requisition of the
scrolled window should not depend on whether the scrollbars are
visible or not. This was not quite the case, because we forgot
one case where scrollbar size was still added to the requisition.
This is somewhat tricky to work out, so put some example
code here for future reference. The tricky part is that
GtkAccelLabel tries to be smart about hiding the accel
if there's not enough space, so we have to make sure to
pack the label with expand=TRUE and set align=GTK_ALIGN_FILL,
or things won't work.
Make sure that variables are declared at the top of the block.
Break up one of the sincos() calls into individual calls to sin() and cos()
so that we do not have to complicate the initialization of the following
GLfloat array.
If the user requests a version less than 3.2 the version is forced to 3.2.
Previous checking code have an inconsistent behavior depending on which
minor version number was specified. This is avoided now by temporarily
converting the major/minor pair into a single integer.
https://bugzilla.gnome.org/show_bug.cgi?id=744288
There was an added check in configure.ac for sincos() for gtkgears.c, where
that function is actually a GCC- and glibc-specific extension, which is
not available on Windows. Reflect on this in config.h.win32.in for the
Visual Studio/Windows builds.
"Install" the .pdb files that were generated along with the build, to make
it easier for people to develop and debug GTK+, especially when used as a
stack, and as the .pdb files are already generated with all builds.
Also make the copy of the .dll, .lib and .exe files more selective so that
we do not accidently copy files that are not meant to be "installed", or
end up making extra copies of plugin DLLs in the wrong places, when the
projects here are included as a part of a grand solution that is used to
build the entire GTK+ stack, for example.
For Visual Studio 2010 and later, the .pdb filename needs to be explicitly
specified so that it will match the filename of the target, if the project
name differs from the filename of the target. Make sure that is the case
for the 3 DLLs that we build for Visual Studio 2010 and later.
Postpone until the last moment whether the target widget still
potentially uses updates from this sequence, or window dragging
actually applies because all gestures on the target went to denied
state.
This fixes window dragging on empty space in a headerbar that is
contained in a paned (as in e.g. gedit).
https://bugzilla.gnome.org/show_bug.cgi?id=745562
These types are not covered by g_test_register_all_types,
and having the types registered when a print dialog is used
helps in cases where GTK+ is dlopened.
https://bugzilla.gnome.org/show_bug.cgi?id=745065
GtkPlacesSidebar applies a sorting function on
the tree model that does not consider the case
of bookmarks, which are sorted by their indexes.
By adding the bookmarks corner case and comparing
then by their indexes, GtkPlacesSidebar can sort
the bookmarks properly in the order they're saved.
https://bugzilla.gnome.org/show_bug.cgi?id=744589
This signal can be emitted by GtkSearchEntry after search has been
cancelled, and other operation mode is set. It doesn't make sense to
populate the search model in that state anymore, so just avoid doing it.
https://bugzilla.gnome.org/show_bug.cgi?id=745479
The object might be destroyed when mid operation, causing crashes as the
query callback still expects the object pointer to be valid. Also, remove
the gdk_threads_enter/leave pairs, the callback will be executed on the
caller (UI) thread, so this is not necessary.
https://bugzilla.gnome.org/show_bug.cgi?id=745479
The search engine might stay alive longer due to extra temporary refs, so
the signal handlers should be removed for the filechooser to ignore these
properly.
https://bugzilla.gnome.org/show_bug.cgi?id=745479
Use the /MP compiler option, where the build time for release builds can
be cut down by quite a bit. This will however cause a brief warning with
debug builds due to the use of /Gm, but the code will otherwise build
normally. Unlike the Visual Studio 2010+ builds, we can't use /d2Zi+ as
Visual Studio 2008 does not support that, so we can't get a better
debugging experience for release builds here.
Use Multiprocessor compilation which can cut down build times by quite a
bit and use the /d2Zi+ flag to have better debugging info being logged to
the .pdb for release builds.
These are only applicable for Visual Studio 2010/2012 and later.
This file now uses round(), which was not available until C99, so include
fallback-c89.c instead of math.h, which includes math.h and does a fallback
implementation of round().
Instead of using glxgears, which still uses OpenGL 2.1 and the fixed
pipeline, we use a slightly modified es2gears, OpenGL 3.2, and the
programmable pipeline.
Avoid scrolling animation when scrolling to where we want
to insert the new folder, since adding the entry doesn't
do the right thing if the treeview is still scrolling.
An alternative would be to wait for the animated scrolling
to reach its target before starting the editing, but this
is easier.
https://bugzilla.gnome.org/show_bug.cgi?id=729366
And use these for the missing axes if the valuator mask is incomplete.
This used to work fine on tablets because the Wacom driver ensures all
valuators are sent, which is not true if using the evdev driver.
https://bugzilla.gnome.org/show_bug.cgi?id=703610
This is not specified specifically by the attached controllers, so let
the scrolledwindow set the mask, as motion events with no buttons pressed
are interesting to it.
https://bugzilla.gnome.org/show_bug.cgi?id=745344
When a window is hidden, its surface and all its roles are destroyed,
if this happens when we already issued a wl_surface_commit and are
awaiting for a frame callback, the clock will remain frozen for the
next time the window is shown.
To avoid this, keep track of the wl_surface_frame() calls issued,
and ensure the clock is thawed after hiding. If we happen to receive
the frame callback, it is just ignored.
https://bugzilla.gnome.org/show_bug.cgi?id=743427
The gesture is hooked to the capture phase, so it works for buttons in
header bars and whatnot. In order to be friendly to the widget it is
capturing events from, an ugly hack is in place to avoid capturing
events when the target widget has a gesture that would consume motion
events.
This happens on button release, which is more convenient if the gesture
can be consumed by something else (eg. window dragging), and already behaves
correctly wrt cancelled gestures, broken grabs, etc.
This also allows us to unify pointer and keyboard behavior, popping up the
menu widget in a single place.
There are two scenarios. A widget sub-class owns a GtkEventController
and passes itself to it, or a controller owned by something else is
passed a widget.
In the second case, if the widget is destroyed before the controller,
we will have a crash when destructing the controller because we will
be accessing invalid memory. Adding a weak reference on the widget
addresses that problem.
This leads to a crash in the first case. When the widget is getting
destroyed, it will drop the reference to its own controller. The
controller will skip touching the widget because the weak reference
would have turned it to NULL. However, when the widget sub-class chains
up to GtkWidget it will try to free all the controllers in its list.
Unfortunately, all these controllers have already been destroyed. So
we need to guard against this too.
https://bugzilla.gnome.org/show_bug.cgi?id=745225
We were trying to start search when the user types anything,
but this is annoying more often than helpful, and interferes
with the location entry. So, stick with explicitly enabled
search (via the search button or Alt-S) for now.
We were just throwing the request away if the app asks to
fullscreen or maximize a window before it has been mapped.
This is something the GdkWindow API explicitly supports,
so make it work by saving the state until the surface exists.
This fixes things under weston. There are bugs in mutter
that keep this from working correctly with gnome-shell.
https://bugzilla.gnome.org/show_bug.cgi?id=745303
When the Wayland compositor vanishes, all applications connected will
receive a SIGPIPE as soon as they try to use wl_display_dispatch().
Do not use g_error() to terminate the applications when this occurs,
g_error() means an error in the application while here it's not truly
the case.
Use g_warning() and exit() instead.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
https://bugzilla.gnome.org/show_bug.cgi?id=745289
Although gtk_list_box_row_grab_focus() is not a public function
it can be easily called by gtk_widget_grab_focus() with a row argument
which has been removed from the list box and has box == NULL.
https://bugzilla.gnome.org/show_bug.cgi?id=744879
The height of the text buttons depends on the font height,
whereas the search button has a fixed-size icon in it...
Prevent unevent heights by putting them all in a size group.
https://bugzilla.gnome.org/show_bug.cgi?id=745263
The height of the text buttons depends on the font height,
whereas the search button has a fixed-size icon in it...
Prevent unevent heights by putting them all in a size group.
Before this patch, we'd always allocate a full size SHM buffer via
the wl_shm_pool, even though it would never be used. Instead allocate a
logical 1x1 cairo image surface.
https://bugzilla.gnome.org/show_bug.cgi?id=745076
In order to support window scales for EGL windows, resize the
wl_egl_window to the window dimension multiplied with the window scale,
just as with SHM window buffers.
https://bugzilla.gnome.org/show_bug.cgi?id=745076
When the preferred surface scale changes, for example when entering a
wl_output with a higher scale than any previous entered output, recreate
the shm surface and redraw the window content with the new window scale.
Before this patch, the internal scale would be changed, but the shm
surface would not be recreated given the new scale, i.e. we'd attach a
buffer for a different scale than wl_surface.set_scale specified.
https://bugzilla.gnome.org/show_bug.cgi?id=745076
If the compositor is too old for handling surface buffer scales, never
tyr to set change it. This will effectively always leave it to its
initial state, i.e. 1.
https://bugzilla.gnome.org/show_bug.cgi?id=745076
Don't try to paint onto an error surface. This happens for example when
gdk_cairo_set_source_pixbuf() is called with a pixbuf that is too big
for Cairo to handle.
Spotted by Christian Boxdörfer
If a scrollbar is not shown (because of policies, or because it isn't
necessary), it doesn't make sense to start fade animations on its window
on captured motion events.
This was added a few years ago, as a way to have _no_ im context
at all. But it didn't actually work. Make it work, and streamline
the handling of none by moving it all to gtkimmodule.c.
As part of this, add context to the translated names of all
im modules we ship.
In order to provide a constant mtime between OS build and deploy time,
while also maintaining a hardlink content-addressed model independent of
timestamps, ostree sets all mtimes to 0.
The icon cache code currently ignores directories with mtime 0, assuming
they don't exist.
Track directory existence in a more precise way.
https://bugzilla.gnome.org/show_bug.cgi?id=745052
When loading SVGs from ICON_THEME_DIR_UNTHEMED GtkIconInfos,
such as those created for a GLoadableIcon, the size of the pixbuf to
load is set as a product of icon_info->scale.
But a few lines above, icon_info->scale is set to -1 for
ICON_THEME_DIR_UNTHEMED GtkIconInfos, so we'll end up always passing a
negative size to the GdkPixbuf loader, which is interpreted as the
nominal size of the image file.
Instead load the SVG at the desired scaled size in that case.
This fixes blurry icon in the notification panel in gnome-shell.
https://bugzilla.gnome.org/show_bug.cgi?id=744991
When loading a GResource-backed GFileIcon into a GtkIconInfo we
currently fail to populate the is_resource private field.
Also, since is_svg is set by looking at the filename, and
g_file_get_path() returns NULL for a GResourceFile, is_svg was always
FALSE.
https://bugzilla.gnome.org/show_bug.cgi?id=744991
Add a way to set a delay factor that can be used
to make the long press more or less sensitive.
Making this a factor instead of exposing the delay
itself preserves the value of the setting as an
overall 'slow down long press' setting.
As Sebastian pointed out, just resetting the initial slider
position was an incomplete fix, because it does not cause the
delta to be recomputed, which is important in this scenario,
because you've likely travelled some distance over the slider
before the long press kicks in.
Instead, explicitly record both the slider position and the
delta.
We record the starting position on button press, but only
start the zoom mode when the long press timeout kicks in.
Depending on circumstances, this can cause a noticable jump.
Avoid this by resetting the recorded starting position after
the long press timeout. Suggested by Sebastian Keller.
First, attributes can be NULL (which is always the case when calling
gdk_window_ensure_native) so do not unconditionally dereference it.
Then the window_type should be taken directly from the GdkWindow as
in other backends (such as the X11 one for example).
https://bugzilla.gnome.org/show_bug.cgi?id=744942
While a popover is hiding, the modal grab is already gone and the toggle
button is clickable again, but clicking again at that time will result in
gtk_widget_show() trying to show an already shown widget (although fading
out and hidden soon) and the toggle button activated.
So let the menubutton set the active status only if the menu/popover
widget wasn't already shown, and ensure this doesn't get triggered by
double/triple button press events.
As an implementation detail, the popover hooks the fade out animation
on ::hide. Destroying the popover right away here is not a problem, but
prevents the animation from actually running. ::unmap will be run after
the animation is finished, so destroy the popover there.
These have the same visual effect and timing than the gnome-shell ones.
During the hide animation, the popover has been made to take focus
elsewhere, and refuse to take any pointer/keyboard input until the popover
is shown again.
This has been based on work from Timm Bäder.
https://bugzilla.gnome.org/show_bug.cgi?id=741405
gtk_scrolled_window_allocate_scrollbar was calling
gtk_scrolled_window_allocate_child just to get the relative
allocation, overlooking the fact that that function is only
safe to call if the scrolled window _has_ a child. Unfortunately,
gtk_scrolled_window_allocate_scrollbar will sometimes get called
when that is not the case. Since we are really only interested
in the relative allocation, just get that directly. This
fixes a segfault in the style-properties-nth-child reftest.
Also try and clarify a few things about event propagation. Move
input-handling.xml into gtk-doc’s expand_content_files variable so it
automatically links to widget documentation. Add links from
gtk_widget_add_events() and friends to the new documentation.
https://bugzilla.gnome.org/show_bug.cgi?id=744054
It will be useless to check the source window on the destination side,
it's at the moment always NULL. Fetch the display from the device instead,
which will be set for every GdkDragContext.
At the time of creating the indicator window, the scrollbar allocation is
poked and reused as the initial window dimensions. This usually happens
on two circumstances, either initially (so a ::size-allocate is emitted,
relocating the windows in the right places), or post-initialization when
calling set_overlay_scrolling() (so the scrollbars already have a valid
size allocation)
However, if the scrolledwindow is unrealized, and later re-realized again,
the scrollbars will already have a valid allocation, although 0,0 based
due to being contained in the previous indicator window. This comes out
wrong then, and the indicator window is given 0,0 based coordinates too.
Fix this by refactoring the scrollbar allocation code out of size_allocate,
and also use that given size at the time of creating the indicator windows,
this will provide the right widget-relative allocation anytime.
Currently, GtkGLArea will leak GError instances set during the context
creation, if an error is set.
If any error is set post-context creation, it should be displayed even
in the case a GL context exists; for instance, we can use the error
display facility for shader compilation errors.
Make that variable go from 0.0 to 1.0 where 0.0 means inactive (slider
is on the left) and 1.0 means active (slider is on the right).
The math is simpler that way and most importantly the value is
independent of size.
Add a button to allow restricting search to the current
folder (and subdirectories). This makes the search more
useful, and makes the file chooser more similar to
nautilus.
In search, we show files from differnt locations, and it makes
sense to show where they come from. This makes the file chooser
more similar to nautilus, too.
Folders that show up among search results were unexpectedly
returned even for GTK_FILE_CHOOSER_ACTION_OPEN. Change things
around so that we switch to the folder instead, which is the
behavior we had in GTK+ 2.x.
https://bugzilla.gnome.org/show_bug.cgi?id=744204
Some compositors might not offer wl_seat 4 resulting in GTK+ clients not
working on that compositor.
wl_seat 4 introduces keyboard repeat information, but when that information
is missing it is retrieved from settings, hence there's no reason to
require wl_seat 4.
This patch was tested against QtCompositor (5.5, dev branch)
and Weston 1.6.1.
Reviewed-by: Daniel Stone <daniels@collabora.com>
https://bugzilla.gnome.org/show_bug.cgi?id=744172
This is necessary to avoid unwanted drag cancel animations,
now that GtkNotebook is careful about cancelling a drag
when the dragged tab disappears unexpectedly.
The existence of OpenGL implementations that do not provide the full
core profile compatibility because of reasons beyond the technical, like
llvmpipe not implementing floating point buffers, makes the existence of
GdkGLProfile and documenting the fact that we use core profiles a bit
harder.
Since we do not have any existing profile except the default, we can
remove the GdkGLProfile and its related API from GDK and GTK+, and sweep
the whole thing under the carpet, while we wait for an extension that
lets us ask for the most compatible profile possible.
https://bugzilla.gnome.org/show_bug.cgi?id=744407
Store the OpenGL version when we first do the extensions check; this
allows client code to check the available GL version without requiring a
call to gdk_gl_context_make_current() and epoxy_gl_version().
When using GDK_GL_PROFILE_3_2_CORE, we are not only specifying that the
GDK should create a core profile; we are also specifying that the
minimum required version of OpenGL is set to 3.2.
We should also specify that the GDK_GL_PROFILE_DEFAULT profile is an
alias for GDK_GL_PROFILE_3_2_CORE.
Now that we have a two-stages GL context creation sequence, we can move
the profile to a pre-realize option, like the debug and forward
compatibility bits, or the GL version to use.
gtk_list_box_bind_model() binds a GListModel to a GtkListBox.
This is a first step towards having GListModel support in Gtk. It's not
useful for large models, because GtkListBox always creates all widgets
for all rows.
cat $(top_srcdir)/build/win32/vs10/$(MSVC_SLN).sln | sed 's/11\.00/$(MSVC_FORMAT_VER)\.00/g' | sed 's/2010/$(MSVC_VER_LONG)/g' > $(top_builddir)/build/win32/vs$(MSVC_VER)/$(MSVC_SLN).sln
cat $(top_srcdir)/build/win32/vs10/README.txt | sed 's/vs10/vs$(MSVC_VER)/g' | sed 's/VS10/VS$(MSVC_VER)/g' > $(top_builddir)/build/win32/vs$(MSVC_VER)/README.txt
cat $< | sed 's/vs10/vs$(MSVC_VER)/g' | sed 's/VS10/VS$(MSVC_VER)/g' > $(top_builddir)/build/win32/vs$(MSVC_VER)/$@
create_vcxproj:
for F in `(cd $(top_builddir)/build/win32/vs10 && ls *.vcxproj)`; do \
case $$F in \
*) cat $(top_builddir)/build/win32/vs10/$$F | sed 's/v100/v$(MSVC_VER)0/g' > $(top_builddir)/build/win32/vs$(MSVC_VER)/$$F \
;; \
esac; \
done
create_props:
for F in `(cd $(top_builddir)/build/win32/vs10 && ls *.props)`; do \
case $$F in \
*) cat $(top_builddir)/build/win32/vs10/$$F | sed 's/<VSVer>10<\/VSVer>/<VSVer>$(MSVC_VER)<\/VSVer>/g' > $(top_builddir)/build/win32/vs$(MSVC_VER)/$$F \
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.