If the monitor vfuncs are not implemented in a display class,
fall back to providing a single monitor object representing
the entire screen. This is not meant to be 'good enough', it
is just to provide some implementation until the last backends
implement the monitor vfuncs. When that is the case, the
fallback should be removed.
When we invalidate a window we need to also invalidate all child windows
that are native (non-native are automatically invalidated as we track
invalidation once per native window only). This was done in a pretty
inefficient way, recursing over the entire tree.
This makes the invalidation much faster by only looking at the native
children of the native window we're in, filtering out those that
are not a descendant of the client side window we're interested in.
Given that there are very few native subwindows this is much faster.
We were missing all of the status directories, and a few sizes.
This was causing us to not find image-missing on systems without
hicolor icon theme (this basically only happens on Windows).
https://bugzilla.gnome.org/show_bug.cgi?id=764378
e8aa9b0440 introduced a new debug mode
that highlights resizes. Unfortunately it has the side effect of
always queueing redraws even when the debug mode is not enabled.
Make the redraw conditional.
Currently only one kind of decorative window is in use - the shape
indicator that is shown when snapping windows to the edge of the screen.
When normal toplevel class is used, its window procedure expects certain
motions from GDK (passing user data to CreateWindowEx(), registering
handle in a hash map etc), and might crash if that is not done.
Dumb window doesn't require anything, it can just be.
https://bugzilla.gnome.org/show_bug.cgi?id=763013
Now halfleft/halfright/fullup snaps do hug screen edges as intended.
Documents AeroSnap behaviour when snapped windows are drag-resized
(currently this implementation handles this in a very simplistic way).
Don't believe GTK when it tells us that window shadow is 0, preserve
previous values (but do remember that GTK wants no shadow, in case
we need that).
Fixes a couple of bugs in unsnapping (check offset against the half
of the window; don't put pointer in the middle of the window vertically
if it still fits in the top half).
https://bugzilla.gnome.org/show_bug.cgi?id=763013
Implements gdk_win32_window_set_shadow_width().
Uses shadow width/height to adjust max tracking size, allowing
windows to be drag-resized to cover the whole desktop.
Also uses SM_C*VIRTUALSCREEN instead of SM_C*MAXTRACK.
https://bugzilla.gnome.org/show_bug.cgi?id=763013
Indicator is a bare layered click-through native window,
painted completely by GDK, including animation.
This commit also isolates some of the more spam-ish debug logging
under ifdef.
This commit also changes the system metric used for maximal window
height for the snapping purposes. Turns out, SM_CYMAXTRACK is way
too large, use SM_CYVIRTUALSCREEN instead.
https://bugzilla.gnome.org/show_bug.cgi?id=763013
This implements the part of AeroSnap that snaps windows when you
drag them (while moving or resizing) to the edge of the screen.
It also fixes drag behaviour for snapped and maximized windows
(if such windows are dragged, first they must be unmaximized/unsnapped).
Note that this code does not take into account the shadow width, and
because of that the under-pointer-position-preserving window moves
might not look as such for maximized windows, which lack the shadow
when maximized, but do have the shadow when unmaximized.
This commit also doesn't cover some corner-cases the same way AeroSnap does.
Also, the snapping indicator (which is supposed to be a window shape that
shows where the window will be if the drag op is stopped at its current
point) is not being drawn, all routines responsible for its creation,
moving and drawing are stubs.
https://bugzilla.gnome.org/show_bug.cgi?id=763013
This is what AeroSnap does. If a window is being unsnapped on
a new monitor, check if the work area is large enough for the
window to fit in its normal size. If the window fits, just
reposition it so that the ratio of
left-window-edge-to-screen-edge / right-window-edge-to-screen-edge
remains the same, without scaling the window.
https://bugzilla.gnome.org/show_bug.cgi?id=763013
It works exactly like AeroSnap.
Except for shift+win+left/right, which is left for AeroSnap
to handle (AeroSnap takes action before we get the message,
so there's no way for us to override it).
The only thing that doesn't work is shift+win+left/right on
a maximized window, for reasons unknown at the moment.
This only implements winkey+stuff behaviour of AeroSnap,
not the drag-to-the-edge-and-something-funny-happens one.
https://bugzilla.gnome.org/show_bug.cgi?id=763013
If a layered window was hidden and is made visible, erase its
contents before showing it. GDK will schedule a redraw, but until
then we generally don't want to show old contents.
https://bugzilla.gnome.org/show_bug.cgi?id=763783
This is achieved by sending undocumented message WM_SYSMENU
to the window.
Before doing that, the window is given WS_SYSMENU style
(to enable window menu) and some combination of
WS_MAXIMIZEBOX (for "Mazimize" item)
WS_MINIMIZEBOX (for "Minimize" item)
WS_SIZEBOX (for "Size" item)
depending on which operations are currently permissible.
WM_SYSMENU is processed by DefWindowProc(), which results
in showing the window menu. We remove extra styles
at the first opportunity (WM_INITMENU message), as they
alter the way our window is rendered.
https://bugzilla.gnome.org/show_bug.cgi?id=763851
While this commit was found to make emacs windows shrink (and it was
reverted in the gtk-3-20 branch for that reason), that was the only
observed breakage, while the reversal broke several of our unit tests.
Closer study of the emacs sources revealed that it does some really
unsupportable things like doing its own X event handling behind GTK+'s
back and freely mixing sizes of GtkWindows and GdkWindows obtained in
various ways. I've filed a bug against emacs with suggestions for how
to avoid the shrinking window, regardless of this commit.
Original commit message:
It seems this branch is not needed anymore. It was originally added in
1999 to support gtk_widget_realize(), but all those reasons seem
obsolete today.
Instead just call gtk_widget_realize().
If you end up at this commit when bisecting:
There is no bug that made me remove this code, it was purely meant to be
cleanup / dead code removal. I seem to have introduced a new bug or
bisecting wouldn't have let you here. So it seems we should just revert
this commit.
Since we are really only interested in the center point of the
slider allocation, the pre-computed slider geometry is perfectly
fine, just use it always. This avoids the complication with
gadget visibility.
The slider gadget may be turned invisible as side-effect of
gtk_range_calc_slider(). If that happens,
gtk_css_gadget_get_content_allocation() returns { 0, 0, 0, 0},
which leads us to calculate a negative allocation for the highlight
node. Avoid this, by just reusing our already calculated slider
allocation in this case (it is not technically the same as the
content, allocation, but the difference hardly matter here.
https://bugzilla.gnome.org/show_bug.cgi?id=764022
These functions are supposed to return the numbers of consecutive
1 bits in each components mask as precision. However, due to a
copy-paste mistake when this code was moved around in
commit 70d689cddd, the precision
was always reported as zero. This affects only a few applications
that directly set window background on X11 windows, such as emacs.
https://bugzilla.gnome.org/show_bug.cgi?id=764210
Delay as long as possible before calling OpenClipboard(),
call CloseClipboard() as quickly as possible after that.
Don't call OpenClipboard() when we don't need to (for example,
we don't need to open clipboard to call GetClipboardOwner()).
Also, print out actual W32 error code in some cases where it
was not printed before.
https://bugzilla.gnome.org/show_bug.cgi?id=763907
Error codes can be easily looked up in an error code list
and/or googled up. Error messages, while descriptive, often
describe the wrong thing, and the messages themselves are not
part of the documentation of a function, unlike error codes.
It would be preferable to have the code, or both.
https://bugzilla.gnome.org/show_bug.cgi?id=763913
As the elements in the enum are not explicitly numbered, inserting an
element between some other elements shall change the values of elements
after the insertion. So append the new element at the end.
Anyway, no code should rely on the position of an element in an enum.
https://bugzilla.gnome.org/show_bug.cgi?id=763850
Some other widget might have mapped and raised another child window of
the toplevel in the meantime, causing the popover window to be covered.
Raise the popover window to avoid the issue.
Bugzilla: https://bugzilla.gnome.org/show_bug.cgi?id=763627
The trash is monitored for state changes - going from empty to non-empty and the
other way round. Monitoring is done by handling change signals from a regular
file monitor. On each signal, an enumeration of the trash contents is started in
order to see if it is empty or not. This causes issues when many files are
trashed, because the gvfs trash backend is flooded with enumeration requests,
resulting in CPU usage spikes. In order to fix this, the "item-count" attribute
of the trash should be queried instead.
Replace asynchronous enumeration with asynchronous information query and update
the trash state based on the "item-count" attribute. Emit state change signal
only when the state actually changes.
https://bugzilla.gnome.org/show_bug.cgi?id=763600
gtk+ currently depends on the scaling factor and the cairo device scale
of both the backend surfaces and image surfaces to be equal.
Until now we didn't apply a cairo device scale at all and depended on the
automatic scaling of CGContexts. This works when drawing with cairo but
fails in case of image surfaces, which get requested at a too small size.
To make the quartz backend behave more like the X11 one, set the cairo device
scale on the surface in gdk_quartz_ref_cairo_surface(). As this conflicts
with the default scaling done by CGContext (we would get double scaling)
undo the CGContext scaling using CGContextScaleCTM().
This patch is based on the following patches by Brion Vibber:
https://bugzilla.gnome.org/show_bug.cgi?id=740199#c4https://bugs.freedesktop.org/show_bug.cgi?id=69796#c4https://bugzilla.gnome.org/show_bug.cgi?id=763779
When loading a per-theme settings.ini file, look for it in
the same directory where we found the gtk.css file for the
theme. Previously, we were always looking in
$prefix/share/themes/THEME/gtk-3.0/, even if the css was
loaded from somewhere else.
https://bugzilla.gnome.org/show_bug.cgi?id=641354
With this change, we now look in
$XDG_DATA_HOME/themes/THEME/gtk-3.x
$HOME/.themes/THEME/gtk-3.x
$XDG_DATA_DIRS/themes/THEME/gtk-3.x
GTK_DATA_PREFIX/themes/THEME/gtk-3.x
https://bugzilla.gnome.org/show_bug.cgi?id=641354
If the configure-event gives us the same size as we had before,
which is common for animation resizes, then try to keep the
existing buffer around. This saves us a memfd_create() syscall
on every frame.
https://bugzilla.gnome.org/show_bug.cgi?id=763350
Now that GdkWaylandDeviceData is gone, the functions prefixed
"gdk_wayland_device_" and taking a GdkWaylandSeat as first
parameter feel out of place. Renaming those makes it more obvious
that it's seat functions.
https://bugzilla.gnome.org/show_bug.cgi?id=763859
It's the same than gdk_device_get_seat() nowadays. Also, rename the
usages of GdkWaylandDeviceData to GdkWaylandSeat in the functions
affected by the removal.
https://bugzilla.gnome.org/show_bug.cgi?id=763859
When animating, we might be changing the size allocation of the previous
stack child. However, we were not querying the size in the process
meaning you would often see warnings about allocating the size without
knowing what it should be.
This simply adds an innocuous size request, since responding to last_child
sizing requests is not all that critical in the transition.
https://bugzilla.gnome.org/show_bug.cgi?id=763900
We were just relying on the drag context finalize() to destroy
the window. But with garbage-collected bindings, that might
not happen as soon as we like, so explicitly hide the window
when the drag ends successfully.
https://bugzilla.gnome.org/show_bug.cgi?id=763659
This isn't an issue at the moment. Only exporting to a file can fail
by setting by setting an error and it happens to correctly return
GTK_PRINT_OPERATION_RESULT_ERROR regardless of this code.
Still, let's make this block of code more correct to prevent future
changes from introducing broken behaviour.
https://bugzilla.gnome.org/show_bug.cgi?id=763731
We've changed our API here; what these applications are doing
used to be fine. Don't make users suffer for this by spamming their
logs in a stable release. We'll keep the warning in master.
https://bugzilla.gnome.org/show_bug.cgi?id=763796
backdrop wasn't in the mix, added and adjusted other widgets
styling not to be overridden by it when not needed.
Spotted a typo making the backdrop base color white in the process.
Using UpdateLayeredWindow() on iconic windows brings them *back* from
their iconic (minimized) state. That is bad.
As a precaution, also don't use SetWindowPos() on iconic windows.
This means that iconic windows can't be moved. That is fixable
by using SetWindowPlacement(), but there is no pressing need to do so,
as there are very few cases when windows need to be moved while minimized.
https://bugzilla.gnome.org/show_bug.cgi?id=763835
Some applications set both a default size on their gtk window and a size
request on the corresponding gtk widget.
Until now, the default size was ignored for fixed size windows, so this
had no effect and remained unnoticed, but with the recent change for
client-side decorations, the default size is now used even for fixed size
windows, which can cause the resulting fixed size window to be much
smaller than expected with the size request.
For fixed size windows, if we have both a size request and a default
size set, prefer the size request as before.
https://bugzilla.gnome.org/show_bug.cgi?id=763749
if (orientation) doesn't make a lot of sense but C doesn't complain and
instead evaluates orientation to TRUE for GTK_ORIENTATION_VERTICAL
(since that's 1), thus inverting the value sizes.
commit c3dc0d80f1 fixed the behavior of
GtkContainer widgets requesting an IMMEDIATE resize-mode.
However, GtkWindow has been stomping on resize-mode during realize()
since commit addcc64b9c. The combination
of factors that led to this not being a visible problem during all this
while is uncertain, but this now causes the Shell to continuously try to
relayout its ShellEmbeddedWindow (a GtkWindow subclass).
This commit separates the resize-mode as set internally by GtkWindow
from the one set with the external API, so that GtkWindow only changes
it when it had not been set before by the subclass.
https://bugzilla.gnome.org/show_bug.cgi?id=763650
The implicit grab may be finished so the pointer lies on top of the other
scrollbar, in this case one scrollbar should lose the hovering state, and
the other should gain it. So we must check for proximity in both indicators.
Two errors here:
1) A typo in splashscreen rectangle calculation - sets right twice
instead of setting top
2) Centering for dialogs is off because it doesn't convert
GDK virtual desktop coordinates to Windows WM virtual desktop
coordinates by adding _gdk_offset_*
https://bugzilla.gnome.org/show_bug.cgi?id=763628
The way gdk_drag_status() may be called multiple times during the
processing of drag and drop events throughout the widget hierarchy
brings some superfluous messaging going in, esp. when it's the last
request the one we want to honor, yet we emit messaging requests on
all.
This is barely appreciable in the X11 backend, but due to the design
of the wayland protocol, quick series of changes like this it have
some self-amplificating consequences which may end up flooding the
connection.
We can delegate this to a late "commit" call, performed within GDK
event management. This way gdk_drag_status() calls may be cached
and only result in windowing messaging once per ::drag-motion or
::drag-data-received event. Emitting the final status will also
avoid spurious action changes on the compositor and the other peer.
https://bugzilla.gnome.org/show_bug.cgi?id=763298
Besides the ::drag-failed handling in order to trigger the window creation
hook, add some handling of the application/x-rootwindow-drop mimetype, so
the same effect is achieved if the tab could be dropped in a destination
accepting this mimetype.
https://bugzilla.gnome.org/show_bug.cgi?id=763387
This makes toplevels pseudo-transparent wrt this mimetype, so if
the drag source offers this mimetype and not another that was
managed by the destination-side widget hierarchy, the window will
be an acceptable target for this mimetype, allowing it to trigger
whatever is meant to in the source side.
https://bugzilla.gnome.org/show_bug.cgi?id=763387
This code:
> gdk_window_get_root_origin (window, &x, &y);
> x -= root_x;
> y -= root_y;
> pointer_window = gdk_device_get_window_at_position (device, &x, &y);
was meant to find the child gdk window at coordinates root_x and root_y.
These 4 lines had 2 bugs:
1) x = x - root_x (same for y) is wrong, it should be x = root_x - x
2) gdk_device_get_window_at_position() does not give you the window
at position x and y. It gives you the window under the device
(mouse pointer) and the returns the device coordinates in x and y.
https://bugzilla.gnome.org/show_bug.cgi?id=763533
Don't make the popup follow the slider while it is open; that
makes interaction with it unnecessarily hard. Also move all the
popups inwards a little bit, so they are not flush with the
scales, which looks untidy.
https://bugzilla.gnome.org/show_bug.cgi?id=763380
We were not taking the scrollable borders into account when
requesting size for the scrolled window, which could lead
to underallocating the scrollbars at size allocation time
when we *did* take the borders into account.
This is most notable with treeviews, where we have the
headers as borders, and was causing the treeview-crash-too-wide
reftest to fail.
This test has a word that wouldn't fit in the room we have with
a window width of 100, and then we get clipped in the one case
but not the other. Make the window a little wider, so it fits.
The tree walk holds a tree iter, which will become invalid
when we either remove the row that it points to or remove
all rows.
Reset the tree walk in those cases to avoid a crash that
was pointed out by Bastien Nocera.
MacOS provides the NSEventTypeMagnify which is very similar to the
Gtk ZOOM gesture and NSEventTypeRotate which is very similar to the
Gtk Rotate gesture. Those two event sequences are translated to a
sequence of GDK_TOUCHPAD_PINCH events. This sequence is then detected
in the upper gtk layers as Gtk Zoom/Rotate Gestures.
https://bugzilla.gnome.org/show_bug.cgi?id=760276
This widget is a bit unusual in that it is a box that acts as
the drop target, while the visible content is a child of the box.
Propagate :drop(active) to the child to make the highlight visible.
When compressing window state events, we didn't free the discarded
event after removing it from the queue, causing us to leak it. This
commit makes sure to free the discarded event after unqueuing it.
https://bugzilla.gnome.org/show_bug.cgi?id=762468
We previously considered any click inside the trough if it
hit an area that the slider might cover. Bring this behavior
back; the trough of scales is otherwise just too narrow to
hit easily with a click.
Consider this bug:
1. Open a file chooser; switch it to $HOME
2. Start typing "~/Dow" with some file that *does* exist in your $HOME
3. Delete the inline-completion selection (e.g. the "nloads" after "~/Down").
4. While you are at "~/Dow_" hit Tab. No completion will occur.
This happens because of the following.
Say the GtkFileChooserEntry is in the process of loading $HOME,
because _set_base_folder() was called. If the entry contains no text,
then the FULL_PATH_COLUMN of the file system model will be set to
unprefixed filenames from $HOME, like
.ssh/
Documents/
Downloads/
somefile.txt
Later we avoid reloading the folder if g_file_equal(old_folder, new_folder).
However, the FULL_PATH_COLUMN gets populated in completion_store_set()
out of the actual filenames that GIO returned, plus the chooser_entry->dir_part.
If the user starts typing "~/Dow" then dir_part changes to "~/", *but*
the folder won't be reloaded since it is also $HOME. However, the completion
machinery assumes that FULL_PATH_COLUMN will contain prefixed entries like
~/.ssh/
~/Documents/
~/Downloads/
~/somefile.txt
So, we add an invariant that chooser_entry->dir_part and
chooser_entry->current_folder_file must change at the same time, and
must not get out of sync: If any of them changes, then the
completions are regenerated.
A gtk_surface.present request was added to gtk_surface which takes
timestamp from some input event, and uses that timestamp to figure out
whether the window can be presented or not. If we don't have a
timestamp, we should just give up instead of making up our own,
otherwise we might steal someones focus.
https://bugzilla.gnome.org/show_bug.cgi?id=763037
The gtk_shell protocol used some half baked unstable protocol semantics
that worked by only allowing binding the exact version of the
interface. This hack is a bit too confusing and it makes it impossible
to do any compatible changes without breaking things.
So, instead rename it to include a number in the interface names. This
way we can add requests and events without causing compatibility issues,
and we can later remove requests and events by bumping the number in
the interface names.
https://bugzilla.gnome.org/show_bug.cgi?id=763001
The adjustment double properties allow values from -G_MAXDOUBLE
to G_MAXDOUBLE, which leads to overflow when calculating
max - min / 10. To avoid that, simply use a fixed page_size of 1.0.
The contents node was not getting state updates at all, and the
trough node was missing some state updates as well, because we
were not calling update_trough_state() in all the places where
it is needed.
This request actually means nothing to the upper GDK layers,
we used to preempt a GDK_SELECTION_REQUEST event, but this is too
eager, and not like things work in X11.
Originally in wayland, this event may be used for feedback purposes.
We however don't perform any mimetype-based feedback, so we can
safely ignored.
This makes data_source_send() the only place where we actually
trigger GDK_SELECTION_REQUEST, this one is conceptually the same
than the X11 selection request event.
...hopefully when needed.
By default I assume a left hand side placement on ltr languages
and the opposite in rtl, for other placements left/right style
classes can be used.
Under Wayland, popovers use subsurfaces, and we end up getting
configure events for these delivered to the toplevel they're in.
To avoid triggering resize loops, ignore configure events that
are not for the toplevel window itself.
https://bugzilla.gnome.org/show_bug.cgi?id=763351
The virtual host assigns the name of the mouse device to
"VirtualBox USB Tablet" in VirtualBox and we'd use that device as mouse.
If not, GtkTooltip is not enabled.
https://bugzilla.gnome.org/show_bug.cgi?id=763017
Other portions of the GDK-Win32 backend make use of this function as
layered windows need to be disabled for GL windows and possibly other
parts, so make this function a private function that is available within
the backend.
https://bugzilla.gnome.org/show_bug.cgi?id=763285
Layered windows and GL do not work well together, so disable layered
windows when initiating a GdkGLContext, so that GtkGLArea programs can run
properly.
Also based on patch by LRN to address the issue.
https://bugzilla.gnome.org/show_bug.cgi?id=763080
The default value for the double-click key in the
org.gnome.settings-daemon.peripherals.mouse schema is 400.
Use the same value as the declared default for the
gtk-double-click-time GTK+ setting, to avoid pointless
differences in corner cases.
https://bugzilla.gnome.org/show_bug.cgi?id=720950
The sidebar in the object page was using up more space than it deserves.
Replace it with a combo box in the subheader. Now that we have more space,
put the CSS node tree and the style properties in the same page again.
And add a default color like it was before.
This also fixes other issues with scale values interacting with scale
mark labels, which were buggy at least since 3.18.
When opening the value editor for any GtkAdjustment properties
in the inspector, the popover stretches out for miles, since
it reserves enough space to draw MAXDOUBLE. This is not useful.
Limit the space we reserve to 8 digits.
This removes the event_poll_fd global variable and the (ab)use of
get_default_display. It is also more consistent with other backends.
Also store display
This is not much of a test, tbh. But it will give us a convenient
dump of all GTK+ settings in continuous, which helps with tracking
down test failures that might depend on settings.
We're seeing loops where the size of some status icons constantly
dithers between 24 and 25. Since I couldn't track down exactly
where the one extra pixel comes from, just stop reacting
to single-pixel size changes.
https://bugzilla.gnome.org/show_bug.cgi?id=758893
We used to always make the labels in message dialogs selectable,
which is a bit problematic wrt. to keynav - the label can
unexpectedly 'turn blue', which irritates some people.
With the new gtk-keynav-use-caret setting, we can now only
make the labels selectable when it is required for accessibilty
reasons.
When changing tool button contents according to the toolbar-style
property, we need to update the style classes to ensure that the
visual style matches.
https://bugzilla.gnome.org/show_bug.cgi?id=760560
gnome-session takes an "app id" for client and inhibitor registration,
This app id is supposed to be a desktop file id (complete with the
.desktop extension), but gtk+ currently uses g_get_prgname ().
This commit changes gtkapplication to use the application id instead,
which is a much more natural fit. gnome-session is going to be updated
to stop using the .desktop extension, too, so everything is consistent.
https://bugzilla.gnome.org/show_bug.cgi?id=763106
We weren't using the open flags on the other locations signal, which
makes impossible for applications like nautilus to act in the same
way that for any other location where the user can choose between
opening in the current view, in a new window or in a new tab.
Add a new signal with an open flags parameter and deprecate
the other-location signal.
https://bugzilla.gnome.org/show_bug.cgi?id=754743
Use gdk_window_get_effective_toplevel when looking for
a suitable transient parent, to skip over offscreen windows
that we might encounter in the window tree. This fixes
a crash in glade.
https://bugzilla.gnome.org/show_bug.cgi?id=763110
One important aspect of non-resizable windows that we need to preserve
is that they shrink when their content requires less size.
Previous changes to allow the default size to be applied to fixed size
windows would have prevented all fixed size windows from shrinking when
their content requires less size.
Allow shrinking for fixed-size windows unless a default size was
specified.
https://bugzilla.gnome.org/show_bug.cgi?id=762974
It does not make sense to pass a for_size into the size allocation
machinery that is smaller than the min-size in that direction.
Warn if it happens, so we can track it down when it occurs.
added a min-height/width compensation too when in fine-tune mode,
so scale with marks and no labels doesn't make the scale node grow
when in fine-tune.
added a scale node padding compensation for the trough growth in
fine-tune mode, so now the scale node doesn't grow anymore when
mark labels are present.
We were failing to do that, leading to progress not disappearing
anymore after it was initially shown, in the gtk3-widget-factory
entry progress example.
Fixes bug 763023: in certain circumstances, XRRGetOutputInfo will return
a null pointer. This commit adds a check to detect and handle this
return value.
If animations are disabled, the only difference we need to make is that
we don't have to start the transition. Size requests should remain the
same.
https://bugzilla.gnome.org/show_bug.cgi?id=762996
Previous commit to address the default size introduced a regression
with fixed size windows if no default size was given, the resulting
window would end up much smaller than its actual content.
kind of a workaround, this approach is pretty unmaintainable, I
hope we'll get a CSS property for spacing directly on the parent
container (a toolbar in this particular case).
See https://bugzilla.gnome.org/show_bug.cgi?id=762397
If a window is not resizable (with gtk_window_set_resizable ()),
the size given with gtk_window_set_default_size() is ignored.
The solution to this would be to use gtk_widget_set_size_request() but
that's a GtkWidget API and therefore does not take into account the
client side decorations when in use with GtkWindow.
Refactor the code so that gtk_window_set_default_size() (which is a
GtkWindow API) gives the expected result on non-resizable windows as
well.
bugzilla: https://bugzilla.gnome.org/show_bug.cgi?id=762974
Will make GTK+ more willing to use CSD for all normal windows without
being asked to. Lack of desktop composition will, of course, prevent
it from using CSD (in theory).
GTK_CSD=0 will force CSD to NOT to be used whenever
possible (i.e. in cases where CSD is not specifically requested
by a window, by design).
https://bugzilla.gnome.org/show_bug.cgi?id=759899
Otherwise WM-dependent default cursor is used, which does not
match our theme. Worse, later GDK will realize that we have
our own left_ptr cursor and will apply it after all, making
the discrepancy even more noticeable.
https://bugzilla.gnome.org/show_bug.cgi?id=762902
* Explicitly grab the device, setting appropriate cursor on it.
* Fix gdk_device_virtual_set_window_cursor() to just set the
cursor, without trying to check that mouse is over the given
window. Also prevent it from immediately resetting cursor.
* Alse take into account things that happen in other parts of
GDK - don't look for replacement cursor, GDK already did that,
and don't create a default arrow cursor instead of NULL,
GDK-W32 already did that up the stack as well.
Warn about inappropriate cursor == NULL argument instead.
https://bugzilla.gnome.org/show_bug.cgi?id=762711
When a gtk_widget_queue_allocate() on some widget increases the clip,
widget->parent's clip was not updated. This appraoch naively just
unions widget's new clip with widget->parent's clip.
This of course only works if widget and parent share the same GDK
window. In the cases where they don't we can't do anything and need a
better fix.
Fixes label-text-shadow-changes-modify-clip.ui reftest.
Toplevels are now true layered windows that are moved,
resized and repainted via UpdateLayeredWindow() API call.
This achieves transparency without any extra effort,
and prevents window size and window contents desychronization
(bug 761629).
This also changes the way CSD windows are detected. We now
use window decorations to detect CSDiness of a window,
and to decide whether a window should be layered (CSD windows should
be) or not.
Decorations are now stored in the window implementation,
not as a quark-based property of the window-as-gobject.
https://bugzilla.gnome.org/show_bug.cgi?id=748872
Normally works only on CSD windows, non-CSD windows continue
to use WM modal loop for drag-resizing and drag-moving. However,
if it is activated on non-CSD windows, it does work.
Has the advantage of being completely immune to AeroSnap.
AeroSnap only worked partially on CSD windows, with the only part
that worked being "don't let users drag window titlebar outside of
the desktop". Now AeroSnap doesn't work on windows moved by
this code at all, which is good, since they currently don't work
well with it due to the way shadows are drawn.
It's possible to also re-implement AeroSnap (or something similar),
but that is a story for another commit.
This code was originally intended to fix the problem of window
size and window contents desynchronization, but failed to achieve
that result in the end. Nevertheless, it serves as a foundation for
other changes to the way window resizing works.
https://bugzilla.gnome.org/show_bug.cgi?id=761629
key repeat is handled client side, which means stalls in the compositor
dispatching key release events can lead to fictious repeat events.
This commit ties key repeat to a server roundtrip to ensure the client
and server are in sync.
https://bugzilla.gnome.org/show_bug.cgi?id=757942
We don't need the key repeat rate or anything like that when
handling key up events, so do key up events first before querying
for that information.
https://bugzilla.gnome.org/show_bug.cgi?id=757942
deliver_key_event is sometimes called from a timeout handler and
sometimes called directly. We currently erroneously return TRUE
(G_SOURCE_CONTINUE) in the case where it's called directly, but to
no ill effect, since we ignore that return value. In the future,
we're going to need to call it directly in other parts of the code
where the return value would be relevant and handling TRUE, would
require adding redundant code.
Instead, this commit just changes the code to always reset the timer
manually, and never rely on glib's ability to automatically reset
the timer by returning TRUE. This makes the code smaller, too, since
there's less special casing required.
https://bugzilla.gnome.org/show_bug.cgi?id=757942
The check is not working for many containers anymore as they are not the
direct parents of their children. We want to allow this behavior in more
places.
We are actually not using the crypt() in GDK-Broadway for quite a while,
so the code implementation for MSVC is actually not used. So, it's time
to get rid of this.
Search also for the headers in include/gio-win32-2.0, as gio.h will
include those headers at some point, and arrange the include paths in a
dependency hierarchy style, top-to-down.
If the parent of a transient is not a native Wayland window (e.g.
offscreen window), the transient loop check will crash.
Check for the actual type in the transient loop check and do not assume
the parent is necessarily Wayland native.
bugzilla: https://bugzilla.gnome.org/show_bug.cgi?id=761156
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
If there are already a window state event for a given window queued
when the window state is changed, drop that event and queue a new event
with a changed_mask based on the state before last event that was queue
without compression.
https://bugzilla.gnome.org/show_bug.cgi?id=762468
We create and destroy gadgets inside the levelbar hierarchy here,
and if we don't explicitly remove their CSS nodes from the parent,
they stick around.
According to xdg_shell, an xdg_surface.configure with size 0x0 should
be interpreted as that it is up to the client to set a size.
When transitioning from maximize or fullscreen state, this means the
client should configure its size back to what it was before being
maximize or fullscreen.
This problem currently only occurs on weston because weston sends a
configure with size 0x0 when transitioning back from maximize or
fullscreen.
bugzilla: https://bugzilla.gnome.org/show_bug.cgi?id=762713
gdk_display_list_devices is deprecated and all the backends
implement the same fallback by delegating to the device manager
and caching the list (caching it is needed since the method does
not transfer ownership of the container).
The compat code can be shared among all backends and we can
initialize the list lazily only in the case someone calls the
deprecated method.
https://bugzilla.gnome.org/show_bug.cgi?id=762891
The way this method is used from the GtkRange subclasses doesn't really
work well when the slider properties change as a consequence of e.g. a
style class being applied (e.g. the fine-tune style class).
In fact, there's no need to read the minimum slider size out of band,
and we can obtain the same result in a way that always work by setting a
private property on GtkRange.
Since we can use negative margins, we should not use the margin box
for the slider area. Use the border box instead, since that's what is
typically mapped to the visible area.
This commit introduces another node, called "contents", that holds the
main contents of the range. This allows for the main gadget itself to
span across the whole surface of the widget now.
The staging buffer gets allocated any time begin_paint is called
on the window. This can happen even with an empty paint region,
so we should cope with that situation. At the moment we crash
trying to post a runtime warning.
https://bugzilla.gnome.org/show_bug.cgi?id=762755
We were adding the border gadget size and the label widget size in any
case, but when calculating the width, we want the maximum of those two,
not the sum.
https://bugzilla.gnome.org/show_bug.cgi?id=760482
The g_print documentation explicitly says not to do this, since
g_print is meant to be redirected by applications. Instead use
g_message for logging that can be triggered via GTK_DEBUG.
The g_print documentation explicitly says not to do this, since
g_print is meant to be redirected by applications. Instead use
g_message for logging that can be triggered via GTK_DEBUG.
The g_print documentation explicitly says not to do this, since
g_print is meant to be redirected by applications. Instead use
g_message for logging that can be triggered via GTK_DEBUG.
The g_print documentation explicitly says not to do this, since
g_print is meant to be redirected by applications. Instead use
g_message for logging that can be triggered via GTK_DEBUG.
The g_print documentation explicitly says not to do this, since
g_print is meant to be redirected by applications. Instead use
g_message for logging that can be triggered via GTK_DEBUG.
GtkWidget uses gtk_container_foreach() to iterate over children and
check whether they need their allocation reset.
However, that leaves out internal children, such as scrollbars of a
GtkScrolledWindow. Use gtk_container_forall() instead.
gdk_display_add_seat was prepending new seats to the list, which
was effectively making the added seat the new default. Since that
is probably not intended, append to the list.
Setting label-yalign should affect the border gadget, but we need to
compensate for its position by moving the child down or up, depending on
the border gadget's position, so the child never moves.
https://bugzilla.gnome.org/show_bug.cgi?id=762123
The gdkprivate-wayland.h header file is included from the top-level gdk
directory; this means that all included files referenced in the header
must be relative to the `gdk` directory, otherwise the build will fail
when the build directory is not equal to the source directory.
This commit fixes a build failure under continuous:
In file included from ../../gdk/gdkdisplaymanager.c:60:0:
../../gdk/wayland/gdkprivate-wayland.h:40:51: fatal error:
gtk-primary-selection-client-protocol.h: No such file or directory
#include "gtk-primary-selection-client-protocol.h"
^
compilation terminated.
Makefile:1155: recipe for target 'libgdk_3_la-gdkdisplaymanager.lo' failed
make[4]: *** [libgdk_3_la-gdkdisplaymanager.lo] Error 1
Except for the init function, all the visual related code is made
of gdkscreen vfuncs, so let's move it to gdkscreen-win32. This way
we avoid keeping other static variables and instead store the info
inside the screen struct.
It just looks wrong if the file chooser comes up with
"Other Locations" ellipsized. Treat it like the other
fixed entries. We only want to ellipsize bookmarks, because
their length is unpredictable.
We now draw real Windows 95 buttons.
Also split out a draw_edge() function that is supposed to emulate
Windows' DrawEdge() function. I guess we'll need it in other places,
too.
So far, this only reworks the tabs at top implementation.
Windows doesn't have support for theming tabs at left/right/bottom
so we need to figure out what to do there. Wine falls back to
unthemed code.
This is necessary for GtkNotebook so that the stack is always drawn
before the header.
And that is necessary so that the active tab can use negative
margins to overdraw the border of the stack to create a gap and
simulate old GTK2-style visuals for notebooks.
:active is reserved for "mouse button down on node", so we have to use
something else. And stack switcher and radio buttons use :checked for
the active widget, so it makes sense to use :checked for the active tab,
too.
Themes have been adapted.
TODO: Implement :active for tabs.
I am testing GTK+ master against mutter 3.19.90, so I'd
like GTK+ to survive even when the compositor does not
support the primary selection interface.
Implement it using the internal copy of the protocol. Otherwise,
we just deal with it the same than clipboard selection, just mapping
it to the PRIMARY atom instead of the CLIPBOARD one.
https://bugzilla.gnome.org/show_bug.cgi?id=762561
This protocol is an internal mirror of the primary selection drafts
being proposed for wayland-protocols. No changes besides prefix/suffix
changes.
https://bugzilla.gnome.org/show_bug.cgi?id=762561
1f74f12d9 rendered entry of keypad decimal mark unuseable for
several national keyboard layouts, this commit amends that, at
least for W32, and makes GTK+ behave more or less the same way
W32 behaves.
The patch works like this:
- When typing the first character at the keyboard or when switching
keyboard layouts, the decimal mark character will be cached in the
static variable "decimal_mark" within gdkkeys-win32.c
- in case of WIN32, gdk_keyval_to_unicode() asks gdkkeys-win32.c for the
current decimal_mark when converting GDK_KEY_KP_Decimal.
https://bugzilla.gnome.org/show_bug.cgi?id=756751
1) MSDN says that the coordinates of the maximized window
must be specified as if the window was on the primary display,
even if nearest display where it ends up is not the primary display.
So instead of using nearest display work area verbatim,
use it only to account for taskbar size, while using
primary display top-left corner (0:0) as the reference point.
2) MSDN says that max tracking size is a system property, we
should just call GetSystemMetrics() and use that.
https://bugzilla.gnome.org/show_bug.cgi?id=762629
This is a hack because we can't really rtesize the buttons.
Instead, we draw the background only over the area that they would
be drawn if they were drawn by Windows. The button is still selectable
outside of this area, but what can you do...
The way we were adjusting baselines if min-height forces
a size increase was not quite working as intended. Redo
it in a simpler way: just split up the excess and count
half of it for above the baseline and half below.
This fixes button labels in dialogs appearing too low.
It is clearly not the intention that the baseline of icons is at
the very top. The visible effect of this was that spin buttons were
higher than expeted, because the box gadget was trying to line up
the baseline of the text with the top of the buttons, forcing extra
height to be requested.
Just don't set a baseline at all for now.
That would imply the pixelcache monitors the style context for changes
and it doesn't do that.
Its only use case was opacity checks, so add
gtk_pixel_cache_se_is_opaque() instead.
We were updating the whole places sidebar when the trash changed.
This effectively removes all rows and create new ones for every trash
state change.
Although when using GtkTreeView it was somehow ok, with the new
implementation with GtkListBox this effectively locks the UI while the
trash operations are being performed.
When performing operations for i.e. 100 files, the UI can be locked
for more than 1 minute since gvfs-trash usually takes time.
To fix this just update the icon of the trash when the state of the
trash change instead of the whole sidebar.
https://bugzilla.gnome.org/show_bug.cgi?id=762677
This adds vendor and product id and axes. This reveals that
the GDK backends have quite different quality when it comes
to returning meaningful information here.
When size_allocate is overridden in widgets, but draw is not,
we can end up drawing a gadget that has not been given a size.
Warn about this, and limp along by drawing the gadget over the
full allocation of its owner widget.
https://bugzilla.gnome.org/show_bug.cgi?id=762614
Sigh.
Now that we've neutered the QEMU USB tablet, I'm finding that
spice is doing just the same nonsense. It has a fake "spice vdagent
tablet". Blacklist that as well.
Text handles use to connect to the first GtkScrollable up the hierarchy
so they can be repositioned when scrolling. It makes more sense to look
up the first child of a GtkScrolledWindow, it must be an scrollable too,
and will be the scrollable that can actually change the position of the
text handles.
https://bugzilla.gnome.org/show_bug.cgi?id=761676
... if the child is concealed and the transition type is set to NONE.
In this case, both preferred width and preferred height should be 0, but
we still can't use that to allocate a size for the child, so care about
the minimum size of the child in gtk_revealer_get_child_allocation.
https://bugzilla.gnome.org/show_bug.cgi?id=761760
We were using the enclosing location when connecting to a server, so
for instance if we were connecting to ftp://test/test it would actually
open ftp://test/ instead of the full path.
To fix it, use the full location when emitting the open location signal.
https://bugzilla.gnome.org/show_bug.cgi?id=756659
Remember the last source device we're generating multiple clicks for,
just so we can bail out if the device changed. That will just reset
the counting.
https://bugzilla.gnome.org/show_bug.cgi?id=723659
This prevents multipress sequences to possibly come from different mice.
Now the accumulated number of presses will be reset if the device changes
in the mean time.
https://bugzilla.gnome.org/show_bug.cgi?id=723659
We weren't using the open flags on the other locations signal, which
makes impossible for applications like nautilus to act in the same
way that for any other location where the user can choose between
opening in the current view, in a new window or in a new tab.
Add the signal missing parameter in order to allow it.
https://bugzilla.gnome.org/show_bug.cgi?id=754743
Previously we just checked the first character. And if that was a "-" as
in "-gtk-some-special-value", we assumed it was a number. Which it
clearly wasn't.
Test included
Containers with RESIZE_MODE_PARENT should never request layout and those
with RESIZE_MODE_IMMEDIATE should only request it for updating CSS.
Fixes clutter embeds (like the tray icon embed in gnome-shell)
continuously requesting relayout when all they want to do is relegate
relayout to Clutter.
https://bugzilla.gnome.org/show_bug.cgi?id=758893
On Visual Studio, unlike MinGW, manifest files are embedded via
including the manifest file as a resource file in the projects, not
via the .rc file. This means that the line in the .rc file that
specifies the manifest file would cause trouble, so that line gets
removed when the full gtk3-win32.rc is generated on Visual Studio builds,
otherwise 2010+ Visual Studio will complain when compiling the .rc file.
Also, the inclusion of winuser.h will cause warnings during the
compilation of the .rc file.
Fix this by isolating the Win32 resource portions of gtk-win32.rc.in to
gtk-win32.rc.body.in and:
-On MinGW, construct the full gtk-win32.rc by doing the winver.h and
winuser.h inclusion first, then append the contents of gtk-win32.rc.body,
and then appending the line to embed the manifest file.
-On Visual Studio, simply copy the gtk-win32.rc.body to gtk-win32.rc,
and generate the full libgtk3.manifest file.
https://bugzilla.gnome.org/show_bug.cgi?id=762311
The first check was the wrong way around.
The second check made the function look wrong. Invalid ID is actually
the special case that should be handled first, so write the function
like that.
We were forcing the size to be at least min-height, but we left the
baselines as they were, which had the effect of making text e.g
in entries 'stick to the top'.
With this change, we adjust the baseline to keep the ratio of
baseline to height unchanged.
The code for adjusting the center widget allocation in case
of uneven sides never worked right in RTL. This was finally
noticed for tabs with close button, which commonly use a
centered label.
The significant change here is a memory leak fix in init_xrandr15.
The rest of the changes makes init_xrandr13 and init_xrandr15 more
parallel, and simplifies init_multihead.
GdTaggedEntry needs that. Though there's probably a bunch of work left
inside GdTaggedEntry to make it look cute again (like storing the area
it reserves for itself to allocate tags in).
Add a gtk_shell.set_startup_id request, so the application can communicate
to the compositor the startup id that it received through the
DESKTOP_STARTUP_ID envvar, or other means.
When running with a Wayland compositor which doesn't support the
xdg_shell interface, gtk+ will segfault while trying to access the
corresponding wl proxy.
Check for xdg_shell support and do not use Wayland if not present, so
that it can fallback to X11, hoping that Xwayland is usable.
Bugzilla: https://bugzilla.gnome.org/show_bug.cgi?id=762258
we use to animate "all" in the transition, this seems to trigger
some weird gtk sizing issue, restricting the transition to just
the needed properties fixes.
We were notifying when an unmount operation was performed. However,
creating notifications from the gtk+ library is not that expected, and
makes notification handling difficult to do from the application point
of view since we cannot dismiss those notifications.
This cause issues like notifications of unmount drives stay there after
a system reboot, which confuses the user.
Instead of that, remove the notification handling for mount operations
on gtk+ and instead create a new signal on the gtkplacessidebar in order
to inform applications using it about an operation about to start.
Only drawback about this is that the GtkFileChooser loses its
notifications when unmounting, that although we could use the new signal
to do it, we actually don't want to notify from any part of gtk+ for
now.
https://bugzilla.gnome.org/show_bug.cgi?id=753351
Some of the translated strings in the cups printbackend are short
and generic and might occur in other contexts. Give them disambiguating
message contexts to avoid translation problems.
There is no point in attaching and then committing the same buffer if
there was no damage. This will also make us do less unnecessary backfill
read backs, for the cases where we paint with an empty paint region.
https://bugzilla.gnome.org/show_bug.cgi?id=762120
If a after-paint was scheduled but nothing was painted, for example when
the it was scheduled by a subsurface wanting to update its position,
we'd still try to read back from the backfill cairo surface and update
the committed cairo surface reference even though no buffer was
attached.
Fix this by adding a new state, 'pending_buffer_attached', which is only
true if a buffer was attached during frame. Only when this is true will
the backfill be read back and the committed cairo surface reference be
updated.
https://bugzilla.gnome.org/show_bug.cgi?id=762120
The following changes were done to (hopefully) achieve backwards
compatibility while allowing themes to change the size of the indicator.
(1) Deprecate the property.
(2) Change the default value of the property to 0. If it is not 0,
use the property's value for the indicator size. This should make
all programs that actually set it keep the size they set it to.
(3) If set to other values than 0, use min-width/min-height of the
check/radio node to size the indicator. This allows themes to change
the size.
(4) Fall back to the previous default size of 16px. This way themes that
do not set the size keep the same behavior.
...the sizing is still off, waiting for Benjamin to add the magic,
probably the icon shadow is missing, not sure since it's blurry.
This needs to be reverted in case the sizing won't get fixed.
That way we can let ::cancel callers to override the visual
result of the operation (eg. when detaching notebook tabs on
NO_TARGET).
Also, document gdk_drag_drop_done() so it is mentioned that
this is a one-shot call.
https://bugzilla.gnome.org/show_bug.cgi?id=761954
We should conform to a minimal set of reasons for the gtk side to emit
a better GtkDragResult than GTK_DRAG_RESULT_ERROR. This fixes the notebook
tab DnD feature, where we rely on GTK_DRAG_RESULT_NO_TARGET.
In the wayland side, unfortunately we can't honor either NO_TARGET nor
USER_CANCELLED, we don't know of the latter, so we could return false
positives on the former.
https://bugzilla.gnome.org/show_bug.cgi?id=761954
Sometimes default tab labels ("Page <n>") get created on-demand,
and in that case, we were forgetting to put them below the tab
node in the CSS node tree. The visible result of this is that the
heuristics for when to give notebooks background in Adwaita fail
in some cases. So, make sure to always place the label below the
tab node.
Instead of drawing them as the background, use -gtk-icon-source.
Also size the marks properly.
Because Windows doesn't have indeterminate radio buttons, use a
cross-fade between checked and unchecked radiomark instead. But
unlike previously, use CSS cross-fade() syntax to draw it.
Padding adds up. A selector like "actionbar box" matches any box
inside an actionbar, so nested boxes accumulate more and more
padding. The intention clearly was to just give padding to the
topmost box that is the direct child of the actionbar's revealer.
https://bugzilla.gnome.org/show_bug.cgi?id=762036
Clip children to their window's size. That way no overdraw happens for
these widgets. But don't clip the handle.
We might in the future consider not clipping un-shrinkable children.
https://bugzilla.gnome.org/show_bug.cgi?id=762021
This requires adding code to do math on number values:
gtk_css_number_value_multiply()
and
gtk_css_number_value_try_add()
were added to achieve that.
Some tests are included.
GtkCssNumberValue is now a base class for numbers.
Actual numbers are now implemented in GtkCssDimensionValue. The name is
borrowed from the CSS spec, so there.
This is in preparation for calc(), as calc(50% - 5px) is valid CSS
but has 2 units. Instead, add a function to query a value's dimension
(so we can differentiate lengths from numbers) and add a function to
query if the value contains percentages.
Margins can be negative, and if we are not careful, then
content+padding+margin can end up with negative dimensions,
which can upset pixman and others. This commit ensures
that a gadget will not request or draw boxes with negative
dimensions, and get_border_allocation and get_content_allocation
will not return boxes with negative dimensions.
This fixes a crash in the paned separator drawing code that
can be reproduced by setting separator padding to 0.
https://bugzilla.gnome.org/show_bug.cgi?id=759657
With the location entry up in the header bar in save mode, we can
end up with the search model being in use when the user types in
the location entry. In this case, we don't make the Save button
sensitive as we should.
Having two entries in the dialog is somewhat confusing anyway,
so just stop the search when the user starts typing in the location
entry.
https://bugzilla.gnome.org/show_bug.cgi?id=761757
This reverts commit 572e9a0402.
_gtk_box_get_children was not doing exactly the same than
gtk_container_get_children does, because the latter uses the forall
implementation of GtkBox that takes into account the children pack mode while
the former just iterated the list of children. This broke the order of
the buttons in a GtkButtonBox when they were packaged with PACK_END.
Entries in treeviews and similar embedded situations don't really
work well if their height is forced to be big. Take out the min-height
for these.
https://bugzilla.gnome.org/show_bug.cgi?id=761686
It does no good to iterate through a series of mime types to call a
function when the eventually-called function,
_gtk_quartz_get_selection_data_from_pasteboard() in this case, gives the
wrong answer and stops the iteration on all but one especially if that
one isn't first.
The one is "image/tiff" and the quartz pasteboard function will return
any image type Quartz knows about for it, so lose the iteration and use
only "image/tiff".
A problem that has been observed in polari is that links in tags
are clickable all the way into the margin. This problem is caused
by gtk_text_view_get_iter_at_position ignoring the return value
of pango_layout_xy_to_index. Instead, pass it back as a boolean
return value. This is technically an API break, but we've allowed
ourselves to change return types from void to gboolean before.
Always have Since: annotations at the very bottom, use the correct
ClassName::signal-name/ClassName:property-name syntax, fix a few typos
in type names, wrong function names, non-existing type names, etc.
The first time a window is shown we should always call SW_SHOWNORMAL.
Understand whether to call SW_SHOW or SW_SHOWNORMAL and the specific
ones for the temporary windows depending on IsWindowVisible.
This also fixes the problem when calling gtk_window_present and
the window is snapped to the left or right of the screen.
This patch is based on the patches provided by Yevgen Muntyan
and Aleksander Morgado.
https://bugzilla.gnome.org/show_bug.cgi?id=698652
If the window is iconified we want to restore the window
to get the proper size instead of showing it normal which
would change the size of the window.
https://bugzilla.gnome.org/show_bug.cgi?id=698652
Things like color affect symbolic icons, but not colored icons, while
other css properties like -gtk-icon-effect affect colored icons, but not
symbolic ones.
If the theme has rounded corners for fullscreen, we don't tell the
window manager that we are now fully opaque, which then makes things
less efficient than they should be.
https://bugzilla.gnome.org//show_bug.cgi?id=761571
When we don't get a baseline passed in, we want to basically
center the children inside the allocation. There was an attempt
in the code to do 'internal baseline alignment', but it had the
side effect of moving the contents to the top when we don't get
a baseline passed in. Remove it for now, this needs some more
infrastructure to do properly.
https://bugzilla.gnome.org/show_bug.cgi?id=761363
These were affected by the recent change to level offset handling.
At the same time, make the test files more realistic by updating
the level offsets when we set a custom range.
We had some odd special-casing for the lowest and highest offset
that did not quite work. The new rule is simple: If the value
is between offset n-1 and n, it gets the style for offset n.
https://bugzilla.gnome.org/show_bug.cgi?id=761416
There are a couple of issues with the way that buffers are handled in
wayland in right. These issues mean that:
- buffers can get leaked at a fairly fast clip under the right
conditions. This leads to the OOM killer kicking in and
gnome-shell and gnome-terminal (for instance) showing memory
usage in the high gigabytes range.
- drawing can happen to a shared memory buffer at the same time
the compositor is reading out the pixels. This can lead to
glitching in drawing and other undefined behavior by the compositor.
This changeset reworks how buffer management is done in the code to try
to address both problems.
The first change (commit 2c300081) addresses the leak by dropping code
that has an unchecked cairo_surface_reference call. The code is dropped
rather than fixed, because it has a more serious issue: it's overarching
purpose is to deal with shared memory buffer contention with the
compositor, but it does it in a racy way and so fails at that mission.
The second change (commit 40e91195a) moves what layer of the code buffer
release events are handled. This is an organizational change in the
code, with no functional changes, but it's important for the last change
in the changeset.
The last change (commit c80dd549) adds back code for dealing with shared
member buffer contention in a race free way. The new code is careful to
never reuse a buffer that hasn't been explicitly released by the
compositor.
Right now we use one buffer for both staged changes (freshly painted
changes waiting for the frame clock to send to the compositor) and
committed changes (changes actively being read by the compositor
process). This creates a problem in the event we need to stage updates
at the same time the compositor is processing committed updates: we
can't change what the compositor is actively processing.
The current solution for handling this contention is to allocate a
temporary buffer on the spot at the time the updates are staged, and to
copy that buffer back to the shared buffer later. The problem, though,
is that the copy to the shared buffer currently happens as soon as
the updates are finished being staged, not when the shared buffer is
done being processed by the compositor.
In order to address that problem, this commit changes the code to always
stage changes to a dedicated staging buffer. The staging buffer is
used exclusively by the client until the client is done with it, and then
once that staging buffer is committed, the client never writes to that
buffer again. If the client needs to stage new updates, it allocates a
brand new staging buffer, draws to it, and back fills the undrawn parts
of the buffer from a copy of the contents of the committed buffer.
As an optimization, the compositor has the option of releasing the
committed buffer back to the client. If it does so before the client
needs to stage new updates, then the client will reuse the buffer
for staging future updates. This optimization prevents having to allocate
a new staging buffer and the associated cost of back filling
that new buffer with a readback of the committed buffer.
https://bugzilla.gnome.org/show_bug.cgi?id=761312
Right now we handle buffer releases coming from the
compositor in a central place. We add a listener when
first creating the shared buffers.
This is problematic because a buffer can only have
one listener on it at once so users of the buffer
can't get notified when it's released.
This commit moves the buffer listener code from the
centrally managed display code to the cursor and window
code.
https://bugzilla.gnome.org/show_bug.cgi?id=761312
The client and compositor share access to the window
pixel buffers. After the client hands off (commits)
the buffer to the compositor it's not supposed to write
to it again until it's released by the compositor.
The code tries to deal with this contention by allocating
a temporary buffer and using that in the mean time. This
temporary buffer is allocated by a higher layer of the code
when begin_paint returns TRUE. Unfortunately, that layer of
the code has no idea when the buffer is released, so it ends
up blitting the temporary buffer back to the shared buffer
prematurely.
This commit changes begin_paint to always return FALSE.
A future commit will address the contention problem in
a different way.
https://bugzilla.gnome.org/show_bug.cgi?id=761312
There are a few places where we destroy a cairo surface and
then nullify it. This commit changes those to use
g_clear_pointer instead.
It also drops a cairo_surface_finish call that is unnecessary
https://bugzilla.gnome.org/show_bug.cgi?id=761312
The name surface is really overloaded when dealing
with wayland windows.
To alleviate ambiguity, this commit changes the name
of the "surface" and "subsurface" members to have
a wl_ prefix.
https://bugzilla.gnome.org/show_bug.cgi?id=761312
Don't allow syntax like
at top left circle
but follow the spec about requiring the at <position> right before the
comma.
This is porbably because
circle at 10px 10px
could be interpreted as
circle 10px at 10px
with the now disallowed syntax, too.
Test included.
Don't hardcode 96 for dpi, but instead use the value of the -gtk-dpi
property (that mirrors the GdkScreen's dpi if it wasn't set explicitly).
This makes these values scale when the large font setting in
control-center is enabled.
During the gadget conversion, the drawing of discrete levelbars
was unintentionally changed to draw a wide trough but narrow
blocks, which does not look great. So go back to the previous
way of drawing things.
https://bugzilla.gnome.org/show_bug.cgi?id=761428
Now selecting a widget by class name no longer works.
This is probably most relevant for users outside of GTK that want to
style their own widgets. Those widgets should now either add their own
style classes (if they want to adjust existing CSS) or use
gtk_widget_class_set_css_name() themselves (if they want to get rid of
all "upstream" styling).
And reset the grab_location in the ::released handler of the multipress
gesture.
Previously, when leaving fine-tune mode, the ::released handler of the
multipress gesture would call stop_scrolling, which calls
range_grab_remove and resets the grab_location. The ::drag-end handler
is executed after that, and only unsets priv->in_drag if the
grab_location is MOUSE_OUTSIDE, which it never was, since the ::released
handler already reset it. This lead to priv->in_drag being set even
though no dragging was in progress anymore, which e.g. made shift
pressed after leaving the fine-tune mode entering it again.
https://bugzilla.gnome.org/show_bug.cgi?id=761402
The fallback behaviour of get_work_area () divides the
screen width and height by the window scaling factor, but
those values are already scaled down.
https://bugzilla.gnome.org/show_bug.cgi?id=761474
Calling _gtk_file_consider_as_remote() with a NULL argument
results in warnings being thrown.
Note that query->priv->location being NULL is a state that does
not seem to be invalid by itself.
This could happen if you do search-as-you-type in a filechooser,
which has a filter that does not match anything *and* the current
"place" selected is "Recent".
https://bugzilla.gnome.org/show_bug.cgi?id=761552
Instead of
/org/gtk/libgtk/theme/$THEME-$VARIANT.css
look at
/org/gtk/libgtk/theme/$THEME/gtk-$VARIANT.css
and that way mirror the directory layout of real themes.
Set _GTK_THEME_VARIANT to empty string when default theme variant
is used. This will allow to understand whether _GTK_THEME_VARIANT
is not supported or default variant is requested.
https://bugzilla.gnome.org/show_bug.cgi?id=761476
This test was failing in continuous, where the tests are running
in a VM with disabled animations. Make the test adapt to that
situation by changing the rui on the fly if we find that animations
are disabled.
This test was failing in continuous, where the tests are running
in a VM with disabled animations. Make the test adapt to that
situation by changing the reference ui on the fly if we find
that animations are disabled.
Make the preview command parse options properly, turn the ID into
an --id=ID option, and add a --css=FILE option that allows to
specify a css file to use for previewing.
This is useful for e.g. previewing the reftest .ui files with
their corresponding .css.
Since 39c2d12330,
priv->operation_mode == OPERATION_MODE_BROWSE no longer
guarantees that priv->browse_files_model is the current
model of the list - we are only switching the models after
loading the new directory. Avoid triggering the assertion
in show_and_select_files by checking if we have right model
before calling it.
https://bugzilla.gnome.org/show_bug.cgi?id=761209
Temp windows without parent are used frequently in our testsuite;
using g_warning on them causes the tests to fail, which is not
useful. Reduce the warning to a g_message.
This lets us do fallback in case an image format is not
supported, and also lets us provide solid-color images.
We don't support image fragment notations.
See ttps://www.w3.org/TR/css3-images/#image-notation
https://bugzilla.gnome.org/show_bug.cgi?id=761318
Instead of spamming stderr with g_warning, use the new
emit_error method of the GtkStyleProviderPrivate interface
to emit an error if loading an image fails.
Currently, GtkCssProvider can emit ::parsing-error only during
the actual parsing, although the documentation hints that it might
happen at other times.
This commit adds a emit_error method to the GtkStyleProviderPrivate
interface that will let us emit errors from the compute() implementations
as well, which can be useful (e.g. if an image fails to load).
In some situations (no header bar, save mode), hitting Escape
would not do anything because the entry ate the key event.
Fix this by telling the entry to only handle Escape when there
is something to do, such as switching back to the path bar.
https://bugzilla.gnome.org/show_bug.cgi?id=761026
We should not hardcode a scale of 1, this leads to
pixellated upscaled images at scale=2, even if the source
is an svg. By passing the proper scale, we can load the
svg at the correct size.
When creating icon info objects for unthemed files, we don't
really have a nominal size, so we pass 0 to mean 'load at
original size'. However, this is not what was happening.
To make this possible, add variants of some pixbuf loading
functions that take a scale factor instead of a desired size,
and use those when we don't have a nominal size.
Eventually, we should probably remove the examples that rely
on geometry support, since they probably don't work correctly
anymore. For now, just disable the warnings.
Grabbing must stay a bit longer until all other backends than x11/wayland
catch up with GDK DnD, so ignore deprecation flags are used on those. The
uses of GdkDeviceManager can be entirely avoided though.
People might put all sorts of gunk in their .XCompose file, in
the hope that XLib makes sense of it. Even if we don't make sense
of it, we shouldn't abort, but instead ignore the lines we can't
understand. Pointed out in
https://bugzilla.redhat.com/show_bug.cgi?id=1301254
We connect to the titlebar widgets change notification regardless
whether it is internally created or not, so don't make the signal
handler disconnection conditional on that either.
We need to unset the titlebar manually before chaining up
in destroy, otherwise we trigger the template invariant
checking - GtkWindow would eventually unset it, but too late
for the invariants checking code in gtk_widget_destroy.
Presently, Gtk will only send a startup notification completion message
for the first window that is shown. This is not good for the case of
GtkApplication, where we are expected to participate in
startup-notification for all windows.
We have avoided this problem by manually emitting the startup complete
message from after_emit in GtkApplication.
Unfortunately, this causes problems for windows that are shown with a
delay. It is also a dirty hack.
The reason for the original behaviour is simple: there is a static
boolean in gtkwindow.c which controls it. We remove this.
Instead, clear the startup notification ID stored in GDK when sending
the completion message. GtkApplication will re-set this the next time
an event comes in which needs startup-notification handling. In the
non-GtkApplication case, newly shown windows will still not send the
message, since the cookie will have been cleared.
Finally, we remove the hack from GtkApplication's after_emit.
This will probably cause some regressions in terms of lingering startup
notification messages. The correct solution here is to always use
gtk_window_present(), including when merely opening a new document (with
a new tab, for example).
https://bugzilla.gnome.org/show_bug.cgi?id=690791
gtk_editable_get_selection_bounds() returns UTF-8 character offsets,
but gdk_pango_layout_get_clip_region() wants byte ranges, so convert
from one to the other.
With English, this is especially visible for passwords, which use ●
as the invisible character.
https://bugzilla.gnome.org/show_bug.cgi?id=761128
This was a thinko - what we sometimes do for signal names is to
use I_() to intern them (to avoid a strdup), but I_() is not
currently available in gdk, so lets just skip this
microoptimization for now.
When the spinbutton grows larger, distribute horizontal size to the
entry and vertical size to the buttons.
Obviously, horizontal size only matters for horizontal spinbuttons and
vertical for vertical spinbuttons.
The font features demo started calling the Harfbuzz API directly
starting from commit 9de3b24c20. Harfbuzz
is an implicit dependency of Pango on some platforms, but it's not part
of the public dependencies; this means that we cannot expect to link to
Pango and automatically get Harfbuzz symbols to link against —
especially when things like --as-needed are in play.
This change triggered build failures on non-Unix platforms, fixed by
commit 2a9967731a, as well as build
failures in Continuous, with this error message:
/usr/lib/gcc/x86_64-gnomeostree-linux/4.9.3/../../../../x86_64-gnomeostree-linux/bin/ld:
font_features.o: undefined reference to symbol 'hb_tag_to_string'
//lib/libharfbuzz.so.0: error adding symbols: DSO missing from command
line
collect2: error: ld returned 1 exit status
In order to get the font features demo to build everywhere we should
take an explicit, though optional, check on Harfbuzz, and conditionally
build the font features demo with the right compiler and linker flags.
The fonts features demo now uses fontconfig APIs via PangoFT2, which makes
the code not build on non-Linux, so only include this demo in the build
on UNIX.
Add more features to the list, allow selecting script/language
from the set that is supported by the font, indicate which
features are present in the font for the selected script/language,
and expand the default specimen to cover latin, cyrillic and
greek.
It looks like the gnome-continuous headers haven't quite
caught up yet, so try __NR_memfd_create instead.
If that doesn't work, i'll likely just add in a fallback
code path.
The tmpdir is used for a wide assortment of things, and
can easily fill up. If it fills then desktop will start
crashing with SIGBUS errors.
This commit changes the shm pool allocation code, to use
memfd_create, instead, so the shared memory files will
be anonymous and not associated with /tmp
https://bugzilla.gnome.org/show_bug.cgi?id=761095
(1) Keep priv->text_allocation for the area used by the text
(2) Compute all text coordinates with the help of priv->text_allocation
As a side effect the get_text_area_size and get_frame_size vfuncs are
now unused. If we wanted them back, they should get a single use durig
size_allocate() and then their results should be stored for further
processing.
This complicates refactorings, so remove that feature. It's not used
anywhere and doesn't play well with nodes the way it's implemented.
If we want it back, we can add it back later.
Changing the visibility of child widgets in size-allocate does
not work well with out current allocation and layout machinery.
To avoid the visual fallout, just keep the arrow buttons visible
and only change their sensitivity.
https://bugzilla.gnome.org/show_bug.cgi?id=754868
We don't want to let baseline adjustment shift the child
out of the original allocation. This is purely a sanity
measure - in practice, the baseline should always be bigger
than the child_baseline.
We were adjusting the allocation to line up baselines before
calling gtk_widget_size_allocate_with_baseline, but that function
is doing this alignment internally anyway and expects to be given
a 'fill' allocation.
Move the allocation adjustment code down into
gtk_box_gadget_allocate_child where it only affects child gadgets,
not child widgets.
Make the theme follow our documentation for the various .csd and
.ssd style classes: They all go on the window node. For now, just
add the new selector; the old one will be removed when mutter has
been updated.
https://bugzilla.gnome.org/show_bug.cgi?id=760714
When measuring children while distributing a given height,
we must measure them for the given width that goes with
the height. Otherwise, things will go wrong if some of the
children do actual width-for-height. This was showing up
as misaligned images in anaconda.
https://bugzilla.gnome.org/show_bug.cgi?id=760967
The pointer position is queried to properly trigger the prelight
updates on the new row below it. We store the last coordinates
though, and track crossing events to unset these, so it's safe
to just update_prelight() here on these.
Check that non-native window are indeed children of the event window and
only then confirm that they should be drawn.
Fixes Glade thinking that it's okay to have the draw function do
different things depending on what window to draw. (This should really
be fixed in Glade.)
There's no reason to insta-crash when something goes wrong. Just don't
do anything stupid.
Also, remove the SPCIAL_CONTAINER() exception. Every case where special
containers needed this, it is wrong and made containers draw children
multiple times.
The text view draw function was leaving its cairo context
with a transformation after drawing to all the border windows,
which lead mis-drawing in gitg. Avoid this by moving the
gtk_cairo_transform_to_window call inside the existing
cairo_save/restore calls.
https://bugzilla.gnome.org/show_bug.cgi?id=760942
Add a query implementation to opacity property. Also fix the assert in
gtk_css_style_property_register() to allow registering properties with
query but without assign function.
https://bugzilla.gnome.org/show_bug.cgi?id=760933
The build glue for collecting all the assets in Adwaita as
resources was assuming that they are all pngs, and tried to
preprocess them into embedded GdkPixbufs.
Fix it to leave svgs unmolested, so they can be recolored
at runtime.
If we fail to load the image for a -gtk-recolor() expression,
fall back to using the image-missing icon instead of crashing,
and include more details in the warning message.
Previously, we were only showing the size of the allocation
and clip area. But there is no good reason to hide the position
of these rectangles, so add them, in the traditional format
of X geometry strings: wxh+x+y
GtkShortcutsWindow is among the 'cheating' containers that iterate
over indirect children in forall, and this is now triggering
an assertion in gtk_container_propagate_draw.
For now, just exclude the cheating containers from the assertion.
Eventually, this needs a better solution.
create_shm_pool doesn't need the width or height, it just needs
the total size. By passing it in, we're requiring it to redo
stride calculation unnecessarily.
This commit drops the width and height parameters and makes the
function just take the total size directly.
https://bugzilla.gnome.org/show_bug.cgi?id=760897
Right now, we assume the stride for the image surface needs to
be 4 byte aligned. This is, in fact, true, but it's better to
ask cairo for the alignment requirement directly rather than
assume we know the alignment rules.
This commit changes the code to use cairo_format_stride_for_width
to calculate a suitable rowstride for pixman.
https://bugzilla.gnome.org/show_bug.cgi?id=760897
create_shm_pool unlinks the temporary file a little,
too late. It should be unlinked before ftruncate()
is called for two reasons:
1) if ftruncate fails, the file is currently not
getting cleaned up at all
2) in theory, if the file is public some other process
could muck with it
This commit just moves the unlink call a little higher
up.
https://bugzilla.gnome.org/show_bug.cgi?id=760897
Button state was being kept in two separate variables, which lead
to slight confusions in DnD that caused the notebook to ignore the
first click after DnD happened from (within) it. Unify these two
into one, which helps us keep better track of the really pressed
buttons.
gdk_rectangle_union will happily add all the worlds pixels
to the union if the initial rectangle is initialized to all
zeros. Therefore, explicitly check for an empty rectangle
before calling it.
This function does not ignore empty rectangles. Since this
is a fairly subtle point about the behavior, it is worth
spelling this out in the documentation. We've had a bug
open about this for a long time:
https://bugzilla.gnome.org/show_bug.cgi?id=464528
Move code to properly reinsert the tab label to where it belongs.
The if has the distinction between reparented-to-dnd-window and
just-changed-the-gdk-window-to-draw-to right there.
https://bugzilla.gnome.org/show_bug.cgi?id=760754
The new function, gtk_render_background_get_clip answers the
question: what pixels are affected if I call gtk_render_background ?
The long-term goal is to have APIs that answer this question for
all rendering primitives.
Commit 8e975b2 (Bug 753969) introduced check of parent accessibility.
Consequently it is not possible to save file if executable attribute
is not set, which might happen for some gvfs backends. Let's assume
that the folder is accessible even if the attribute is not set.
https://bugzilla.gnome.org/show_bug.cgi?id=760881
The viewport itself doesn't move, so we cannot use it as the pixel
cache's background. Use the bottommost using element instead, which is
the viewport's child.
This might need adaptations in themes as we want the backgroud to be
opaque to speed up pixel cache performance.
Use gtk_box_gadget_reverse_children and gtk_css_node_reverse_children
to flip the children of the header_gadget and the tabs_gadget when
appropriate.
Add new CSS node tests to verify that the node order is updated
as expected in all cases.
These functions will be automatically called by the windowing backend.
The usual hooks to run this from in gtk/ shouldn't even happen, but
it is worth to document which calls are expected and which aren't.
If the grab window is destroyed the grab will be implicitly removed,
although we won't get GdkSeat:ungrab called in order to clear our
internal window<->seat relation entirely. Setting a weak ref will
nullify the pointer we keep on the seat to the window, avoiding the
expected crashes.
Due to implicit grabs, we basically can guarantee that the pointer
won't have any buttons pressed at the time of wl_pointer.enter.
Seems like a good place to unset any button modifiers that might
have been left stale by compositor grabs.
When this is in use, there's essentially a bunch of dead code here.
When all backends are ported, we'll be able to remove grab/cursor
management plus a bunch of source-side event handlers.
This includes managing input events and source-side DND events,
as well as setting the appropriate cursor and emitting the signals
that are expected in this mode of operation.
This function (most similar to gtk_drag_get_cursor() helps figure out
the right cursor that applies to a given action. To be used by the
various backends.
We've traditionally left GTK+ to handle the input side of things,
letting GDK only manage the windowing-specific messaging. This
way of splitting responsibilities is not compatible however with
some backends, we must fold then input management at the DnD stage
into GDK (and backends) domain.
The gdk_drag_context_manage_dnd() call is meant to be the entry
point for this mode of operation, if the drag and drop operation
becomes managed, the caller (i.e. gtkdnd.c) doesn't need to perform
grabs, nor manage input events itself.
As a consequence of this, different aspects now belong to the
backend GdkDragContext implementation:
- Because the caller doesn't see keyboard events anymore,
keyboard navigation must be managed in GDK, so is the decision
of the current action based on modifiers/button pressed.
- Because the caller won't see input events in general, the lifetime
of the drag and drop operation is now communicated through the
::drop-performed, ::dnd-finished and ::cancel events
- Because the caller doesn't participate anymore on the action
being chosen, the pointer cursor must be set by the backend.
The caller is rather notified of the final action through the
::action signal.
The caller is still responsible of dealing with the corresponding
GdkSelection, ensuring its ownership and communicating the supported
mimetypes.
... and remove the also forgotten void function that lingered around
with it.
Fixes opacity=0 parts like inactive spinners or sort indicators in
treeview headers being drawn since last commit.
Oops.
Previously, we had a special cae to draw subwindows of widgets.
This is not necessary as conformant widgets should be able to properly
render themselves when all windows need to be painted.
From now on assume that is the case.
We therefore paint nonnative GDK windows "inline" by just returning TRUE
for gtk_cairo_should_draw_window() for those windows.
This speeds up hilighting different rows in the listbox gtk-demo example
tremendously (by a factor of 10 or more) as the previous code was
O(<number of non-window subwidgets> *
<number of subwindows>) which in the listbox example were ~15,000 and
~2,000 respectively.
When using forall(), only list the revealer, which lists the box
containing all the children. When using foreach(), bypass revealer and
box and list all children added to the box.
Derived classes like GtkSourceView with their own ::key-event
handler need access to this, in order to make their keynav
as nice as the builtin one, wrt to caret visibility.
https://bugzilla.gnome.org/show_bug.cgi?id=760748
And use it to handle kinetic scrolling in the GtkScrolledWindow.
However, dropping the delta check causes the X11-based kinetic
scroll to break since we don't have the stop event here. Correct handling of
xf86-input-libinput-based scroll events is still being discussed.
https://bugzilla.gnome.org/show_bug.cgi?id=756729
This adds support for the new wl_pointer events available in v5.
The wl_pointer.axis_source events can be ignored for the purposes here, the
main reason they exist is so that the combination of axis_source=finger and
axis_stop triggers kinetic scrolling. We don't need to care about the source,
axis_stop is enough for us to tell us when we're scrolling.
The wl_pointer.frame events group events together and is intended as a
mechanism to coalesce events together. This for example allows us to now
send a single GTK scroll event for a diagonal scroll. Previously, the two
wl_pointer.axis events had to be handled separately.
The wl_pointer.axis_discrete event sends mouse wheel clicks where
appropriate, and is translated into up/down/left/right scroll events.
https://bugzilla.gnome.org/show_bug.cgi?id=756729
Since a41f02f9b1, GtkIMContextSimple
uses threads to load X Compose files. It does that every time a new
im context object is initialized, so we can easily end up with multiple
threads accessing the shared global_tables list at the same time.
Use a lock to prevent that.
https://bugzilla.redhat.com/show_bug.cgi?id=1276432
To ensure that the title moves to the other side as expected
in RTL, use GTK_ALIGN_START/END instead of GTK_ALIGN_FILL
when packing the title gadget into the vertical box, and
flip the alignment when the text direction changes.
This is mostly search and replace ala
GtkButton => button
GtkWindow => window
.button => button
or removing style properties that aren't used anymore like
-GtkButton-default-border: 0
Most uses of builtin icons (check and radio buttons,
expanders, etc) are placed next to labels, so they should
be properly positioned wrt to the baseline. Lacking anything
better, give the builtin icons a baseline that places the
center of the icon at the strikethrough position.
The 'mad hack' that GtkAccelLabel used to affect the GtkLabel
draw function broke with the introduction of gadgets, since
the positioning is no longer relative to the widgets' allocation
at the time of the call, but rather to the gadgets allocation.
Instead of coming up with an even madder hack to keep this
working, give the GtkLabel draw function knowledge about accel
labels.
https://bugzilla.gnome.org/show_bug.cgi?id=760663
Previously this setting would just invalidate the whole CSS tree and
thereby hopefully avoid all cache usage.
Now, we actually don't cause extra invalidations anymore, but instead
avoid ever inserting anything into the cache when this setting is set.
This essentially copies the previous cache implementation. With one
caveat: It is now attached to and maintained by the CssNode, not by the
CssStyle.
And this is important because styles may be reused in incompatible
situations which would cause cache collisions and lead to broken CSS in
weird situations.
For now, the split out style cache doesn't cache anything. This is
mostly to make sure that bisections of wrong caching behavior will
bisect down to the commit that actually adds caching.
Use a vertical box gadget for the overall expander, and a
horizontal one for the title row. This lets us get rid of
all the custom allocation code here.
So far, the box gadget is always allocating all children the
full size in the cross axis. This behavior corresponds to the
align-items: stretch behavior in
https://www.w3.org/TR/css-flexbox-1/#align-items-property
This commit implements the other modes described there.
While widgets have halign/valign properties that we can use for
this, the API for inserting gadgets has to change to take an
extra align parameter. All callers have been updated to pass
GTK_ALIGN_FILL, since that corresponds to the previous behavior.
https://bugzilla.gnome.org/show_bug.cgi?id=760668
From gtk_widget_path_iter_set_object_name documentation:
"When set, the object name overrides the object type when matching CSS"
Update gtk_widget_path_to_string to match this behaviour.
This is sometimes needed, and calling into actual icon theme
code just for it is confusing - the resulting icon does not
depend on the icon theme at all.
https://bugzilla.gnome.org/show_bug.cgi?id=760536
This prevents WM from drawing shadows around tooltip windows,
which, in Adwaita, should have no shadow and are CSD-ish (which means
that tooltip window is larger than it looks, and WM draws the shadow
only on the outside, leaving a gap between the visible tooltip edge and
the shadow).
https://bugzilla.gnome.org/show_bug.cgi?id=759898
With Mingw-w64 fstat() can be an inline function that
calls _fstat32() or _fstat64(), depending on some macros.
And if LFS is enabled, fstat() is defined to turn into
_fstat32i64() or _fstat64(). And some/all of the above
might also be macros as well. Side-step all that mess
and excplicitly re-define fstat as _fstat32, which is
guaranteed to use a version of "stat" struct that
has 32-bit size and time fields, which is what we want.
https://bugzilla.gnome.org/show_bug.cgi?id=760615
While rescanning the object tree, we were emitting ::object-selected
signals, possibly causing wild blinking in the application window.
Don't do that.
https://bugzilla.gnome.org/show_bug.cgi?id=760572
Commit 0b96b8a1 set margins via css, but accidentally changed the
semantics of margins for separators in popovers so that any separator
in a gtkpopover had a margin. This meant that the separators in
GtkListBoxes in popovers also had a margin around their separators, and
this is not what we want because it doesn't match separators in
listboxes not in popovers.
https://bugzilla.gnome.org/show_bug.cgi?id=760427
If a GtkGestureSingle is set as touch-only, pointer events would be
discarded without giving an opportunity to the regular GtkGesture
handler to manage those.
Because the pointer events weren't actually managed by the gesture,
gtk_gesture_get_sequence_state() (rather unhelpfully here) will resort
to returning GTK_EVENT_SEQUENCE_NONE, which is in turn interpreted
by _gtk_widget_consumes_motion() as "may be handling the events for
this sequence", because gestures in this state presumably handle
the events, just that it's not "claimed" yet.
Instead, use gtk_gesture_handles_sequence(), which will perform the
expected check on the event sequence being managed, as we expect
here.
When a tab drag starts, we need to move the tab label into the drag
window via gtk_widget_set_parent_window().
If we don't unparent, but just unrealize the widget, we don't lose the
cssnode position.
GtkNotebook does not switch the current page if all pages are hidden. So
it may be that no visible page exsits, but there still is a current
page set.
We culd clear the current page, but I'm unsure about backwards
compatibility.
So instead, this new function handles that case.
This allows reworking the content node to do real height-for-width.
The content node also takes care of border width, but we might want to
have the toplevel do it or just get rid of it.
Deprecate initial-gap, tab-curvature and tab-overlap properties. All
their features can be achieved using CSS.
This CSS achieves the same effect as a 10px initial gap:
notebook header {
margin-left: 10px;
margin-right: 10px;
}
A tab overlap of 10px can be achieved via:
notebook tabs {
margin-left: 10px;
}
notebook tab {
margin-left: -10px;
}
And tab curvature is essentially the same as padding or border on a tab.
We skip sides with 0 border width in render_border, but when
we collect sides with the same style, we may pass the 0 width
down to render_frame_stroke anyway. So skip width 0 sides
there as well.
Instead of taking the border and manually removing it from the
allocation, render our background over all the border allocation box, as
that's more correct and does not take padding into account twice.
The GtkGesturePan behavior of locking onto certain orientations may
come across as confusing, and is not strictly necessary for mice and
other pointing devices.
As GtkGesturePan is also a GtkGestureDrag, we just use the same
callbacks on both gestures.
https://bugzilla.gnome.org/show_bug.cgi?id=759670
When a cursor is specified in gdk_seat_grab(), the cursor is reverted as
soon as the pointer enters or leaves another window.
To avoid this issue, store the grab cursor separately, so we force-apply
it in ::set_window_cursor(). Also, unset early the seat info from the
window on gdk_seat_ungrab(), so the next time switch_to_pointer_grab()
happens we end up picking the cursor set for the window underneath the
pointer window.
Based on a patch by Olivier Fourdan <ofourdan@redhat.com>.
https://bugzilla.gnome.org/show_bug.cgi?id=760213
the vertical padding from the headerbar has been removed, now the
sizing is done with min-height, this avoids title and subtitle
labels making the headbar.
We are getting the mime data destroy notify called when we
destroy the surface in finalize. Trying to set the XSync counters
at this time is a) pointless and b) yielding an X error because
the counters have already been destroyed.
To avoid this, unhook the damage tracking before destroying
the surface.
https://bugzilla.gnome.org/show_bug.cgi?id=760188
We are setting mime data with a destroy notify on the cairo
surface to get notified when cairo registers damage for the
surface (in that case, it clears the mime data, calling the
destroy notify). Unfortunately, the destroy notify is also
called when we remove the mime data ourselves, which was
not intentional.
Use a flag in the window impl struct to ignore the callback
when we are clearing the hook.
The assumption that MIN() takes care of all infinities here
turns out to be wrong. We were getting inf and -nan for some
combinations of 0 width/height and corners, leading to invalid
matrices and cairo errors.
https://bugzilla.gnome.org/show_bug.cgi?id=759668
Instead of creating an intermediate pixbuf, just render
the window surface onto the new surface. Doing things this
way lets us avoid the cairo_surface_mark_dirty() call in
gdk_pixbuf_get_from_window(), which is not generally safe
to call on 'random' surfaces - it asserts that the surface
has no mime data attached, and the X11 backend uses mime
data for damage tracking purposes...
We destroy the widget that is wrapped around the drag window
when the object data on the drag context gets cleared. Destroying
the window before that happens leads to unpleasantries. E.g. we may
try to access the frame clock, which doesn't exist anymore, and
things go downhill from there. So, keep the window alive for
a little longer.
We destroy the widget that is wrapped around the drag window
when the object data on the drag context gets cleared. Destroying
the window before that happens leads to unpleasantries. E.g. we may
try to access the frame clock, which doesn't exist anymore, and
things go downhill from there. So, keep the window alive for
a little longer.
Renaming the files from -dark to -inverse makes it more obvious
that this is not a dark variant in the sense of the 'prefer-dark'
setting, but rather a separate theme (sharing the same CSS).
Replace the cursor-color and secondary-cursor-color style
properties with the caret-color and -gtk-secondary-caret-color
CSS properties.
For the 'auto' value of these properties, we keep the same
behavior that we used to have when the style properties are
not explicitly set.
This property is defined in http://www.w3.org/TR/css3-ui/#caret-color.
We also add a -gtk-secondary-caret-color property, since GTK+ has
supported differently colored split cursors in the past. Unlike
CSS, we don't support the weakly defined auto keyword, and just
use currentColor as the initial value.
X11 has the notions of "transient for group", and while it's an ICCCM
violation, it's commonly used and documented that a window manager
would treat a window with transient_for set to None to transient for all
windows of its group.
gtk uses this when an application sets a dialog type window but does not
specify an explicit transient.
While this works on X11, there is no such thing as groups in Wayland and
the closest equivalent which is set_parent() in xdg-shell takes only one
parent. This is what is used for modal dialogs.
To get something similar in behavior to what is available on X11, a
solution is to update the parent() of the dialogs without transient when
the active surface changes.
Bugzilla: https://bugzilla.gnome.org/show_bug.cgi?id=759161
Quite a few applications use GTK_WINDOW_POPUP to create various
temporary windows and place then on screen. That works fine on X11 but
on Wayland there is no global coordinate system for regular surfaces.
If the application is using a gdk temp window and set a parent with
gtk_window_transient_for(), the gdk wayland backend has all it needs to
create a subsurface that can be placed at will by the application.
Bugzilla: https://bugzilla.gnome.org/show_bug.cgi?id=759738
If the background is transparent, we can't use it for the input shape,
since that will be empty. Draw a box with rounded corners irectly
instead, in fully opaque black.
https://bugzilla.gnome.org/show_bug.cgi?id=759905
I misunderstood what the overlay is good for: We need to allocate
it the full size of the widget. since we are using it to render
a background gradient *over* the application-rendered color.
At the same time, save some 100 lines of code by using an icon
helper as gadget, instead of handling the icon manually.
gtk_render_content_path is expecting the full box dimensions,
not just the content area. So, add the border before calling it.
Note it is still possible to have some separation between the
color and the border, by setting padding.
Recent gettext has a feature to allow consumer projects to supply their
own string extraction rules for XML files, in ITS format.
Gettext still ships the rule for *.ui, but it would be better
maintained in the upstream project.
https://bugzilla.gnome.org/show_bug.cgi?id=760202
Transitioning between linear gradients like
linear-gradient(to top, yellow, green) and
linear-gradient(to left, yellow, green) was yielding
nonsensical results, with the gradient line jumping around
wildly. Fix this by falling back to stupid image interpolation
for these cases.
Always returning a left_ptr if we can't find anything better
broke firefox application-specific fallback for missing cursors.
Keep that working by only doing the fallback for the CSS cursor
names, not for things like hashes.
https://bugzilla.gnome.org/show_bug.cgi?id=760141
Always returning a left_ptr if we can't find anything better
broke firefox application-specific fallback for missing cursors.
Keep that working by only doing the fallback for the CSS cursor
names, not for things like hashes.
https://bugzilla.gnome.org/show_bug.cgi?id=760141
This tests that horizontal boxes flip their child nodes
according to text direction to maintain the left-to-right
ordering of child nodes for both text directions.
CSS nodes have a linear sibling relationship; this is supposed
to correspond to left-to-right placement in horizontal arrangements.
This commit explicitly sets the text direction to rtl if the
filename ends in .rtl.ui, so we can test differences in node
tree layout between text directions.
Follow the generally white background we use everywhere else.
This is not perfect, we get double borders when the search bar
is shown, as can be seen in gtk3-widget-factory.
Gadgets don't connect to style-changed for widget nodes, and
GtkImage uses its widget node for the icon helper. The visible
effect of this is that symbolic icons don't change color when
switching to the dark variant of Adwaita.
Fix this by manually invalidating the icon helper.
Instead of the weird PathElt struct, generate a quick-n-dirty parser
that parses CSS selectors into GtkWidgetPath elements.
Based on a patch by Benjamin Otte.
In https://bugzilla.gnome.org/show_bug.cgi?id=601425 the annotations
were changed to int as they not only take the predefined enum values
but also user defined values registered through gtk_icon_size_register()
As a result the typelib doesn't contain any information about
GtkIconSize for those arguments and the Python docstring only
shows the corresponding Python type "int".
This changes the argument docs to mention the type explicitly
so the Python doc generator can add a link to Gtk.IconSize
which contains the most useful predefined values.
https://bugzilla.gnome.org/show_bug.cgi?id=757411
The Visual Studio versions that we support supports locking functions in
their CRT, so support that to optimize things a bit. Also update the
config.h.win32.in so that its entries are more in line with the ones in
the autootols builds, and make sure that we use UNIX line endings.
Use a custom, empty theme and stop importing reset-to-defaults.css.
This avoids overwriting initial values, so our initial value
filtering works better.
Drop the custom style printing implementation in gtkcssnode.c and
instead reuse the existing gtk_css_style_print function, extending
it a bit to suit our needs.
Instead of computing values, just recognize initial values by
having no CSS section. Also do away with the show-initial flag, and
just always filter out initial values. The flag can come back when
it is needed.
The node declaration has all the information we are printing
here (except for visibility). At the same time, redo the format
to print the information in selector format, and indicate
(in)visibility by enclosing the selector in square brackets.
The previous way of manually juggling the visibility of the
labels doesn't work anymore, now that gadgets of invisible
widgets don't allocate space anymore.
This uses the same function for dumping CSS nodes and styles
as the CSS node test. It can be used to test aspects of inheritance
and matching, as well as initial values.
No actual tests yet.
Add a gtk_style_context_to_string function that can serialize
a CSS node or tree of nodes, optionally including CSS properties
as well.
This will be useful in writing tests.
It turns out we don't really need to use a separate gadget for the
infobar, if all we do is chaining up to the parent GtkBox which already
uses a gadget.
Just remove all the boilerplate.
The notion of a separator being wide or not does not make sense when a
theme can set any CSS property on it, and
separator-width/separator-height are on their way out for
min-width/min-height.
Instead, just rely on the CSS gadget; we can stop using wide-separators,
separator-height and separator-width, and at the same time deprecate the
space-size style property of GtkToolbar.
67ab00e01e removed the fake configure code in gtk_window_show() and
replaced it with a simple gtk_widget_realize(). The initial allocation
code in realize() only allocates the natural size or the last requested
size which now no longer is set, resulting in a too small first allocation.
This builds a configure request to compute the allocation size instead
which includes default size, CSD etc..
This problem could be seen in case of a GtkPaned in a GtkWindow with a
default size set and the pane position set as well. The first allocation
would be the natural size of the GtkPaned which would clamp the pane
position if too larg. Only the second allocation would fill the parent
window using the now wrong pane position.
https://bugzilla.gnome.org/show_bug.cgi?id=759705
In that case, code expects an arrow gadget to be present but we're not
creating it in every occurrence.
Fix it by ensuring there will be an arrow gadget when reserve_indicator
is TRUE.
GtkViewport currently tries to draw a background over the bin window.
The feature is a bit broken at the moment, as it does not take into
account padding that might have been set on the GtkViewport, but in
general it does not seem very useful, and goes somewhat against the CSS
box model where every widget/gadget is responsible to draw its own
background. For a fix, we could either have the viewport gain a "bin"
gadget, or we could stop drawing the background.
As it isn't clear that there are any users of this feature, stop drawing
the background; a client can achieve the same effect by drawing the
background on the widget inside the viewport itself.
As GtkCssNode has the visibility concept, it makes sense to mirror it in
gadgets.
Do what visibility does in widgets: Hidden gadgets can't be drawn or
allocated and request a 0x0 size.
Note that just like widgets, gadget visibility must not be changed in
size request, allocate or draw handlers.
GtkWidget::child-visible has no equivalent yet, code will have to
emulate that manually.
Previously, the ID was only set on the CSS node as a side-effect
of calling gtk_widget_get_style_context. This was showing up
in CSS style tests as nodes lacking their IDs.
The test needs to be updated for the renamed :dnd pseudo class.
We also need to add a .errors file for the deprecation errors
that we are now producing.
Putting the deprecated class behind the official variant does
not work for the case of :focus and :focused - we were matching
:focus and leave a dangling 'ed'. So, put the deprecated classes
before the official variant, and explicitly mark them as deprecated.
Split the CSS docs off from the GtkCssProvider docs and
give them their own chapter. Among other things, this commit
introduces more or less complete definitions of the syntax for
the supported selectors, a complete list of all supported
properties, and definitions for their values. This includes
documentation for GTK+-specific properties such as -gtk-icon-source.
I hadn't noticed the :drop() pseudo state in the CSS4 Selectors
spec when I added this a while ago. This commit renames
GTK_STATE_FLAG_DND to GTK_STATE_FLAG_DROP_ACTIVE and adds
:drop(active) as equivalent to the :dnd pseudo state.
We don't actually do anything when the label is not selectable
except for consuming the event, which breaks for instance titlebar
drags with labels that contain links. Simply deny the gesture in
that case to allow the event to bubble up normally.
https://bugzilla.gnome.org/show_bug.cgi?id=759798
... on older Visual Studio versions, where isinf() is not available, and
copy the isinf() implementation from gdk/fallback-c89.c to
gtk/fallback-c89.c.
gdk_widget_get_frame_clock can return NULL. In particular,
this can happen when the drag window is destroyed at the end
of a DND operation. Handle this gracefully when it happens.
This adds tests for animation-name, animation-duration,
animation-timing-function, animation-iteration-count,
animation-direction, animation-play-state, animation-delay
and animation-fill-mode.
we have to do some assumptions for css selectors limits for this
particular case, so for split headerbars to work correctly the
actual haderbars need not to have the titlebar class applied.
The gtk_builtin_icon_get_default_size_property returns a const char *,
in a way such that some compilers insist that something that is of a
pointer value be returned, so fix that by replacing 0 with NULL.
When clicking "Cancel" on the "Do you want to use GTK+ Inspector?"
dialog, unregister the update_debugging idle handler. Also, steal
reference to 'inspector_window' while gtk_destroy_widget(), to make
further gtk_window_update_debugging() calls as a no-op.
https://bugzilla.gnome.org/show_bug.cgi?id=759764
The GetSize callback *can* assume that minimum and natural are
non-NULL. Buy minimum_baseline and natural_baseline can and
will be NULL, so handle that. This was causing crashes e.g. in
pavucontrol.
applications with split headerbars has a container in the titlebar
slot so the .titlebar style there needs to be reset. Since we can't
go backward with selectors I assumed that any csd application
sports a headerbar hence relying on that styling and resetting
the .titlebar styleclass.
Move the gtk_css_gadget_allocate call before the
gtk_label_update_layout_width call. This fixes the
statusbar label in widget-factory page 2 coming
up fully ellipsized.
Transient nodes should not propagate style-changed signals
that can cause widgets to get reallocated. This was causing
treeviews and iconviews with pixbuf cells to be constantly
resized and redrawn.
Clearing the icon doesn't appear to be necessary with
todays code, and it has the unfortunate side-effect of
temoorarily hiding the icon's window, which breaks grabs
and makes us miss the button release event when the icon
is changed from a button press handler.
We're going to add back the original struct definition removed by
a6e4de28, because using the typedef breaks all sorts of things like
gtkmm and WebKit, and having separate struct definitions allows us to
change the types in GdkBorder from gint16s to gints without breaking
ABI.
Functions requiring CoInitialize are called just in two places:
- the filechooser thread which calls its own CoInitializeEx
- the dnd code
Moving CoInitialize in the dnd specific init is cleaner and
we can pair it with the corresponding CoUninitialize since
CoUninitialize should be called as many times as CoInitialize.
Note that it is ok to call this function multiple times, so it
will not break if another codepath will need it in the future.
The patch also replaces the deprecated CoInitialize with the
equivalent call to CoInitializeEx (already used in the filechooser).
Empty boxes end up setting the clip to { 0, 0, 0, 0}, so warning
for a width or height of 0 triggers false positives. Instead,
initialize the clip to clearly invalid values.
As part of this conversion, remove the hardcoded padding around
the label.
Unfortunately, we cannot use the main gadget for drawing the frame
decoration, since we want to draw a custom border instead of the
stock css border that gadgets insist on drawing for us. Therefore,
add an extra gadget with name border and use it just for rendering
the frame.
Otherwise the gtk_grab_remove() calls on widget destruction will happen
on the default window group, which may leave the real window group
of the popover with a dangling pointer if it is not the default one.
This could be seen on the inspector, open a popover in the properties
list and close the window with alt-F4.
Invisible nodes don't change the first/last-child status of the nodes
after/before them. That means we don't have to just check the state of
the adjacent node when modifying this state, but all their siblings
until we hit a visible node.
The same way, a node is not the first child if it has no previous
sibling, it is the first child if it has no previous visible sibling.
This is important for caching in the global lookup cache.
CSS min-width and min-height on the slider node fit this
perfectly. We still fall back to the slider-width and
slider-height style properties if the CSS properties are
not set.
In most places, we can do with the pointer/keyboard of the default seat
instead of the client pointer. We can also remove some code from
gdk_input_init() because we know for sure there's no floating devices to
care about here.
There's places where we still need to deal with floating devices, which are
unseen by seats. Ignore deprecations and keep using GdkDeviceManager until
we can forget about floating devices.
There's places where we still need to deal with floating devices, which are
unseen by seats. Ignore deprecations and keep using GdkDeviceManager until
we can forget about floating devices.
There's places where we still need to deal with floating devices, which are
unseen by seats. Ignore deprecations and keep using GdkDeviceManager until
we can forget about floating devices.
There's places where we don't set a seat yet, plus the places
outside GTK+ where events are created, we should warn and fall
back to the master device seat with these.
1e1064398c broke the build.
When I run make, I should make sure to run it in the right directory.
And not in the gtk/ subdirectory that will never build widget-factory...
The clipboard emit events after the button we connected it to was
already destroyed (on application close for example), so make sure we
don't try to use that dead button.
Gdk Wayland backend walks up the transient windows tree, but does not
check for cycles when doing so.
As a result, if two or more windows are transient to each other, the
Wayland gdk backend will enter an infinite loop.
While this is clearly a bug in the application, gtk+/gdk should be more
robust and handle such errors more gracefully.
To avoid looping infinitely at various point in the code, check for a
possible loop when setting the transient relationship and deny the
request to set a window transient for another if that would create a
loop.
Bugzilla: https://bugzilla.gnome.org/show_bug.cgi?id=759299
gdk_pixbuf_get_from_window() paints the given window onto a new cairo
surface. Create that new surface with the same device scale as the
window so that the result is not scaled down on hidpi screens.
This is similar to 657a43e (which was reverted), but doesn't modify the
behavior of gdk_pixbuf_get_from_surface().
https://bugzilla.gnome.org/show_bug.cgi?id=757147
When doing a gtk_widget_show_all() on the shortcuts window,
accelerators for both RTL and LTR directions are being shown.
Make sure that no-show-all is set by default on hidden shortcuts, and
updated if the widget direction changes.
https://bugzilla.gnome.org/show_bug.cgi?id=759541
This was causing problems in the case when only one of the paned
children is visible - we would use uninitialized memory, leading
to invalide clip regions. Concretely, the signal tab in the inspector
would sometimes not render at all.
Make min-width/height have preference over the set default size. This
allows shrinking the widget. The default size is only used if min-width
is not set (or explicitly set to 0.
Drop the margin misuse and use the border allocation of the
handle gadget. We use negative margins to make the border allocation
larger without pushing the paned children out.
Size of the progress element now grows also when it's close to 0 size.
Previously the size was clamped to the minimum size, now it starts
growing from the minimum size.
So for a 100px trough with a 10px min size progress, the sizes of the
progress element change like this:
old new
0% 10 10
5% 10 14
10% 10 19
20% 20 28
50% 50 55
100% 100 100
Our actions on ::device-removed only actually applied to master
pointers, so listening to GdkDisplay::seat-removed and operating
on the seat pointer is equivalent.
We were not supporting plural form of the available space, which
is a problem in some languages.
However in this case is kind of a difficult matter, since we use a
formatted string from glib with g_format_size.
To fix it, use the same behavior as g_format_size to decide when
it should be used a plural form or not.
https://bugzilla.gnome.org/show_bug.cgi?id=759491
gtk_css_node_insert_before/after can easily create cycles
which later lead to stack overflows. Even if we're not
catching all cycles here, at least we can detect obviously
invalid arguments, such as inserting a node next to itself.
This was already mostly done by inheritance from GtkCheckButton.
To complete it, stop using the draw_indicator vfunc for radio
buttons, and instead make the indicator gadget draw either a
check or radio.
Use a gadget for the button, and for the indicator.
A complication here is that GtkCheckButton (and
GtkRadioButton) have a totally different appearance
depending on the ::draw-indicator property. If an
indicator is not required, we just reuse the
GtkButton gadget.
This mostly works; some minor sizing issues left, e.g. cranking
up the indicator-size causes the checkbutton grid in testgtk
to overlap.
This removes some hairy code handling with borders and padding,
which may or may not be correct. The examples in testheightforwidth
all continue to work, and min-width now works for labels.
This gives us min-width/height support. Currently, the spinner
still has a hardcoded minimum size of 16 and doesn't grow beyond
32. We may want to revisit that at some point.
When things change in the iconhelper, queue a resize on the owner widget
so that it automatically resizes.
Only do this for iconhelpers that are used as gadgets though, not for
temporary helpers - and to check this, check if the node is transient.
A gadget is halfway between a widget and a CSS node. It's supposed to
provide the minimum convenicence around CSS nodes until we've figured
out how to integrate them with widgets.
Build the gtk-update-icon-cache, gtk-builder-tool and gtk-query-settings
tools and run gtk-update-icon-cache as part of the post-build
"installation" process.
Pointed out (and reminded) by Paolo Borelli in bug 759436 that we should
build, "install" and run gtk-update-icon-cache in the MSVC builds as well.
Constructing GtkCssStyleChange objects without styles is forbidden, so
don't do it. Instead untangle the callback from the actual update
function and call that untangled function directly.
When we reuse styles that didn't change across changes to the source
CSS, make sure we clear the caches. Otherwise child nodes will pick up
styles from the old source CSS.
We no longer need a grabbed seat, instead we'll just use the default
seat if this happens, not without first warning and recommending
gdk_seat_grab() for the operation.
https://bugzilla.gnome.org/show_bug.cgi?id=759309
This allows GDK to unset the grab itself. Also, make sure we unset
the "pointer emulating" touch on the device if this is the
pointer emulating sequence.
https://bugzilla.gnome.org/show_bug.cgi?id=759309
GdkWaylandDeviceData conceptually gathers the data that belongs to
a seat, so it's been renamed (although the old typedef stays, plenty
of refactoring is due here...).
The methods in GdkSeatClass have also been implemented, the most
remarkable is ::grab, which ensures the grab is performed on all
the relevant "master" devices.
https://bugzilla.gnome.org/show_bug.cgi?id=759309
On some systems, the gtk settings are not used properly for wayland.
Indeed, g_settings_schema_source_get_default is used, and as the docs says it,
"all lookups performed against the default source should probably be done
recursively.".
https://bugzilla.gnome.org/show_bug.cgi?id=759409
Remove some now unused includes and dead code, and rename
gtk_drag_set_icon_window to gtk_drag_set_icon_widget_internal,
since it is no longer restricted to toplevel windows.
Under Wayland, the compositor does it, so there is no need
for us to move the window ourselves. For X11, we are now
doing the animation from the X11 backend. Trigger that by
calling gdk_drag_drop_done().
What changes here is that we have to keep the icon_window
alive for as long as the drag context exists. Use a weak
reference to do so.
Showing the drag cancel animation can be done in the X11
drag context implementation now that we hold the drag
window there, and have the start coordinates.
Since we can't control if and when the application destroys
the drag widget, we take a snapshot of the window contents
and display that during the animation. This should be good
enough for all practical purposes.
Add a variant of gdk_drag_begin that takes the start position
in addition to the device. All backend implementation have been
updated to accept (and ignore) the new arguments.
Subsequent commits will make use of the data in some backends.
In commit 2c61316677 we avoided emitting
the style-changed signal if no CSS property changed.
Unfortunately, this also caused CSS styles to not be updated when
animations started if those animations did not change any CSS value
immediately. In those cases the animation would just never start.
The obvious example was the spinner.
Catch the case where a CSS style did not change and don't emit the
style-changed signal in that case.
This saves not only the emission of the signal, but also doesn't cause
invalidation in child nodes, which would previously get a PARENT_STYLE
Instead of having old and new style, now have a GtkCssStyleChange opaque
object that will compute the changes you are interested in for you.
This simplifies change signal handlers quite a bit and avoids lots of
repeated computation in every signal handler.
We were only storing the dialog size on unmap, but resetting to the
stored default value more often, e.g. on focus-out. This was causing
the dialog to 'jump back' to its remembered size after the user
manually resized it, leading to frustration and bug reports.
Instead, save the dialog size on every ::size-allocate of the toplevel.
To avoid needlessly spamming dconf, only write the new value if it
changed.
In Wayland, the hotspot of a DND icon is set using the buffer offset in
wl_buffer.attach. To implement this, add a private API to cause the
next wl_surface.attach to offset the new buffer with a given offset.
Setting a DND icon hotspot sets this offset while also queuing a redraw
of the window to trigger the wl_surface.attach.
https://bugzilla.gnome.org/show_bug.cgi?id=759168
...in the process simplified the touch-selection styling, check
and radios not fixed there since I'm going to add proper osd assets
for those (istead of forcing the dark variant assets there as before).
The name gtk_text_*_begins_* was used only for begins_tag(). All other
similar functions use "starts": starts_line(), starts_word(), etc.
So for consistency, add gtk_text_iter_starts_tag() and deprecate
gtk_text_iter_begins_tag().
Also change (allow-none) to (nullable), to use the new annotation.
https://bugzilla.gnome.org/show_bug.cgi?id=759092
In Wayland, the hotspot of a DND icon is set using the buffer offset in
wl_buffer.attach. To implement this, add a private API to cause the
next wl_surface.attach to offset the new buffer with a given offset.
Setting a DND icon hotspot sets this offset while also queuing a redraw
of the window to trigger the wl_surface.attach.
https://bugzilla.gnome.org/show_bug.cgi?id=759168
Otherwise rounding errors fool the "tab under coordinates" checks on
crossing events, which will be triggered close enough to the window
rectangle if the pointer moves slowly enough.
With this, the tab_prelight() function correctly figures out we've
moved the pointer outside the tab area when called in
gtk_notebook_leave_notify().
https://bugzilla.gnome.org/show_bug.cgi?id=759091
After removal of the selectable header and separator from the combo box,
the method to update the menu sensitivity must be changed as it assumes
at least two items within each sub menu and contains special handling
for the separator. Removing this fixes bug #759079.
Since we're no longer doing geometry widgets, don't send
base size and increments to the window manager anymore either.
This avoids an ugly 2 pixel gap to the right and bottom of half-tiled
terminals under gnome-shell.
We were getting the "New Accelerator" text mixed with the
content of the underlying cell, since plain labels don't
have a background. Go back to putting the label in selected
state, and fix the theme to render that white-on-blue. This
was lost when we switched to using a selection sub-node.
Showing two lists in a paned was a bit awkward, and space was
getting too limited. Go back to showing just the node list at
first, and make the CSS properties available via a stack. At
the same time, add a right-click context menu to the node list
to make the name and class editing more easily available.
The gesture functionality was taken over by GtkShortcutsShortcut,
so this widget is no longer needed, and it never was in a stable
release, so lets get rid of it.
GtkFontChooserWidget is using a GThemedIcon in its template,
so we need to ensure that the type is registered before
loading it. This was causing the defaultvalue test to fail.
GtkStatusIcon tests don't work well under xwayland either, so just
skip them unconditionally.
GtkEntry now fails because the update of the im-module is no longer
deferred to an idle, and (gtk-im-simple) is not a valid module
name, so skip this property.
The subscript was affecting the vertical alignment too much,
so tweak the rendering of the L/R markers to avoid that. Also,
mark these as translatable.
Instead of creating an icon source, making sure no state is set and
therefore the icon-effect will be applied and then rendering that icon
source, just call the icon-effect apply function.
Also, the new way isn't deprecated.
On Wayland, for tooltips to work as expected, the type hint must be set
to tooltips, otherwise the popup window won't be translated as a
subsurface.
Fix the test do work as expected under Wayland.
Bugzilla: https://bugzilla.gnome.org/show_bug.cgi?id=759018
In Gdk, a GdkOffscreenWindow parent has to be the root window. This is
problematic on Wayland because the root window doesn't necessary have the
right information with regard to scale factor.
This patch proposes to rely on the embedder, if available, to derive
surfaces as well as getting the scale factor.
https://bugzilla.gnome.org/show_bug.cgi?id=758936
Applying the client-side decorations in the configure routine greatly
increases the chances of having the right size for the GtkHEaderBar and
border shadows.
Yet, it may be possible that these sizes change at a later point in
time, if for example the GtkHeaderBar grows in height while adding new
controls.
Mention this possible pitfall in the documentation for
gtk_window_resize().
https://bugzilla.gnome.org/show_bug.cgi?id=756618
The entry code passes GTK_DEST_DEFAULT_HIGHLIGHT when setting
up the drop target, but that is ineffective because of the
custom drag_motion implementation. Instead, call
gtk_drag_[un]hightlight ourselves.
This borrows heavily from the CSS4 fonts draft's font-palette, currently
found at https://drafts.csswg.org/css-fonts-4/#font-palette-control
The palette is mainly meant to trigger invalidations when colors used for
symbolic icons change, to potentially allow extending supported colors
in symbolic icons and to recolor all colors of a symbolic icon, not just
the main one.
The syntax for the property goes like this:
Name: -gtk-icon-palette
Value: default | name <color> [ , name <color> ]*
Initial: default
Applies to: all elements with icons
Inherited: yes
Animatable: yes, each color animated separately
The property defines a list of named colors to be used when looking up
icons. If a name is not defined, the value of the current "color"
property is used. Which names are relevant depends on the icons in use.
Currently symbolic icons make use of the names "success", "warning" and
"error".
"default" is the current behavior of the GTK when coloring symbolic
icons and is equal to the string
success @success_color, warning @warning_color, error @error_color
Animation is crudely implemented by animating colors that are in both
palettes that are animated and otherwise keeping the color from the
palette that defined it. Note that this can cause a sharp cut at the
beginning or end of the animation when the color goes away and will
therefore be replaced with the color property.
You can see an example of animations at
http://gfycat.com/CautiousPeacefulIaerismetalmark
When we start a drag cancel animation, we can just keep the existing
window. The reset was only necessary to convert from cursor icon to
window and we removed the cursor handling.
Just like we did for the default size, that reduces the chances of
having the headerbar missing or wrongly sized when computing the client
side decorations controls.
https://bugzilla.gnome.org/show_bug.cgi?id=756618
The Wayland dnd surface must remain in place until the drag
is over. Setting it directly as the hardcoded window of the
widget we construct carries the danger that it might get
destroyed prematurely, e.g. when the application calls
gtk_drag_set_icon_name more than once and we recreate the
widget.
Instead, create a dedicated toplevel, and reparent the widget
into it. To keep the code simple, we use the same approach
under X11 as well, and make it the responsibility of the
GDK dnd code to keep the window position updated. We already
pass the current pointer position to gdk_drag_motion, which
makes this very easy.
As a side-effect of these changes, it is now possible to use
non-toplevel widgets as drag icons.
https://bugzilla.gnome.org/show_bug.cgi?id=748763
If that sounds confusing, it's because GTK and CSS can sometimes not
agree on naming.
:active for CSS means that a button is currently pressed on an element.
And that is clearly not the case for spinning spinners.
This removes the dependency on state, which should be used for selection
CSS styles, not for actually applying them.
And image-effect does exactly what we want already, so we can start
using it.
The size of icons is a property that is relevant to who is rendering the
icon, not to the icon itself.
Example: Starting a DND operation from an entry icon should cause the
icon to resize (from the entr icon's size to the DND icon size).
Make gtk_icon_helper_ensure_surface() a private function that just
ensures the surface was loaded.
Add gtk_icon_helper_load_surface() that is called by the above function
and the dnd code to actually load the surface.
Just do the invalidation check once, there's no need to do it in every
branch of the switch.
Also remove useless checks: These functions will not be called if we
already have a rendered surface.
Just do the invalidation check once, there's no need to do it in every
branch of the switch.
Also remove useless checks: These functions will not be called if we
already have a rendered surface.
It seems this branch is not needed anymore. It was originally added in
1999 to support gtk_widget_realize(), but all those reasons seem
obsolete today.
Instead just call gtk_widget_realize().
If you end up at this commit when bisecting:
There is no bug that made me remove this code, it was purely meant to be
cleanup / dead code removal. I seem to have introduced a new bug or
bisecting wouldn't have let you here. So it seems we should just revert
this commit.
Under X11, popovers are always constrained to the toplevel
window. Under Wayland, they aren't. This commit adds a
property that allows to explicitly constrain popovers to
the toplevel, giving them the same behavior under Wayland
as under X11.
https://bugzilla.gnome.org/show_bug.cgi?id=757474
Widgets such as gtkfilechooser may be saving their size and position on
the unmap callback, if the client-side decoration header bar is removed
first, the reported size will be wrong.
https://bugzilla.gnome.org/show_bug.cgi?id=756618
gdk-wayland backend would not re-configure a surface when its size and
scale match the known size and scale.
But there might be a pending xdg_surface_configure() that would revert
this change so we should re-configure even if the currently known
size/scale match, otherwise we may end up with a wrong size after the
xdg_surface_configure() is received.
Bugzilla: https://bugzilla.gnome.org/show_bug.cgi?id=758901
If we "release" the button first, the drag will be eventually cancelled,
we must first signal GDK_DROP_FINISHED, and then release the button so
the success status prevails.
It doesn't make a lot of sense to have this stored as data offer data,
rather together with the source_targets array, which is what we're
poking here in the end.
https://bugzilla.gnome.org/show_bug.cgi?id=758713
Dissociate ownership from our maintenance of wl_data_source objects.
The only place where ownership must be updated together is
data_source.cancelled, for the other places GDK should take care of
setting up the right ownership, even if at a different order than
we'd expect here.
This fixes GTK+ apps on wayland being locally confused about the
current selection ownership. Because gtk_selection_add_targets()
results in a wl_data_source being created, and ownership being
updated right away, early callers of this will change the ownership
even if the widget it's being called on didn't explicitly request
the selection ownership yet.
https://bugzilla.gnome.org/show_bug.cgi?id=758660
'win.lines' contains the same content as the GtkTextBuffer, so to find
@match_start, forward_chars_with_skipping() is called with
skip_decomp=FALSE (the last parameter). So far so good.
On the other hand, the content 'lines' (the needle split in lines) is
casefolded and normalized for a case insensitive search. So,
forward_chars_with_skipping(..., skip_decomp=TRUE) must be called only
for the portion of text containing the needle.
Since 'start_tmp' contains the location at the start of the match, we
can simply begin at that location to find the end of the match.
Unit tests are added.
https://bugzilla.gnome.org/show_bug.cgi?id=758698
Doing things the other way around seems to cause problems in
some cases where children want to do different things depending
on the window position.
https://bugzilla.gnome.org/show_bug.cgi?id=758563
Instead of just listing the return type of get_plus_button() and
get_minus_button() in the documentation, we can use the (type)
annotation to ensure that the introspection data reflects the actual
type of the returned widget.
Fix a regression introduced by:
commit 6866d1c widget: Make gtk_widget_queue_allocate() not resize
Where the dropdown menu in Firefox would not be relocated after the
toplevel window is moved.
bugzilla: https://bugzilla.gnome.org/show_bug.cgi?id=758609
While searching for the cause of bug 746745 it was discovered that one could
not set WS_EX_TOPMOST extended window style with SetWindowLong(),
but must use SetWindowPos() for that purpose.
This was never a problem most likely because it is highly unlikely for windows
to acquire/lose WS_EX_TOPMOST after they are created, by means other
than SetWindowPos() (which GTK does use to raise/lower windows and
set/remove keep_above), and because trying to set/unset WS_EX_TOPMOST with
SetWindowLong() results in WS_EX_TOPMOST merely not being set/unset (that is,
other styles are still set/unset within the same call and no error is
signalled).
https://bugzilla.gnome.org/show_bug.cgi?id=758483
Instead of having our own copy of the pointer gestures XML file, use
the one installed by wayland-protocols.
Since pointer gestures is an unstable protocol, it went through the
unstable protocol naming convention changes, which is reflected in this
commit.
https://bugzilla.gnome.org/show_bug.cgi?id=758634
Just like it happens for window dragging, we're likely to not see the
matching button release for this event, so we must reset the controller
manually here.
https://bugzilla.gnome.org/show_bug.cgi?id=758661
Before calling gdk_window_move_resize(), store the full configure
request, not just width and height.
Fixes firefox randomly losing position of its dropdown windows.
https://bugzilla.gnome.org/show_bug.cgi?id=758609
After the grab is finished, we would expect an enter event, and
GDK updating internally the cursor for that window and device.
This means there is no need at all to store it separately in the
backend.
As a side effect, animated cursors are now also possible on grab
icons.
https://bugzilla.gnome.org/show_bug.cgi?id=735847
The way master devices detach from their other master counterpart is
vulnerable to infinite recursion due to the way we first recurse on
the other device before clearing the pointer, this may happen if
that last reference to the other master device is held by the
device->associated field.
https://bugzilla.gnome.org/show_bug.cgi?id=732742
Other backends take care of the cairo surface destruction in
GdkWindow::destroy. We must do the same here, or the cairo_surface
and its corresponding wl_buffer are left dangling.
https://bugzilla.gnome.org/show_bug.cgi?id=747295
tracker:uri-is-descendant/parent has the unfortunate side effect of
rendering the collation mechanisms in the database useless, so those
require full table scans to be validated.
Performing these as pure string comparisons will perform much better,
as those allow the underlying sqlite to rely on its own collation
to perform the search, which can be significantly faster with many
elements in the database.
https://bugzilla.gnome.org/show_bug.cgi?id=758407
It turns out that it is nicer in glade to have just a single
widget that can show either a shortcut or a gesture, so make
GtkShortcutsShortcut do it both.
GtkShortcutsGesture is now redundant and will be removed before
the next stable release.
The current code in gtkshortcutswindow.c is good enough to
construct a widget once from a .ui file, but fails to handle
changes at runtime, as happen e.g. in glade. Fix this by
listening for changes to section-name and title.
This prevents normal application windows (and other kinds of windows)
from being moved up in Z-order to be above windows that have the
always-on-top bit set. Doing so would make the previously-normal windows
in question also always-on-top implicitly.
Windows that are already always-on-top will be restacked on top of other
always-on-top windows too.
https://bugzilla.gnome.org/show_bug.cgi?id=746745
Empty underlines are hard to make out. Since we get somewhat
unreliable section information from the CSS parser, we just
make sure that we always underline at least one character.
The builder syntax for tags was invalid here (why did this not
get flagged as error ?!). While we're at it, give the warning
underline a nice, orange color.
If the buffer of a cursor is NULL, for example if its an empty cursor,
just set the cursor surface to NULL as well. Not doing this we'll use
uninitialized hotspot coordinates, dimensions and scales.
https://bugzilla.gnome.org/show_bug.cgi?id=758025
We can't use up_panel and down_panel as differentiators for the buttons,
because these window system resources don't exist before realize().
Just use a one-off enum for this purpose.
https://bugzilla.gnome.org/show_bug.cgi?id=758094
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
