This broke when the event type check in gdk_key_event_matches
was removed and replaced by a precondition that accepts both
key press and release events.
Add the check in gtk_keyval_trigger_trigger instead.
Our new approach to modifiers works with a fixed set,
there is really no need to customize the modifier
masks if the backends are all supposed to deliver
the same modifiers.
This removes the use of the context menu and shift group
intents in gdkevents.c. If it turns out to be important,
we need to introduce vfuncs for gdk_event_triggers_context_menu
and gdk_event_matches.
Reviewing the existing settings, the only backend with
some differences in the modifier intent settings is OS X,
and we would rather have that implemented by interpreting
the existing modifiers in the appropriate way.
X11 Wayland Win32 OS X
primary ctrl ctrl ctrl mod2
mnemonic alt alt alt alt
context menu - - - ctrl
extend sel shift shift shift shift
modify sel ctrl ctrl ctrl mod2
no text alt|ctrl alt|ctrl alt|ctrl mod2|ctrl
shift group varies - - alt
GTK now uses the following modifiers:
primary ctrl
mnemonic alt
extend sel shift
modify sel ctrl
no text alt|ctrl
The context menu and shift group intents were not used
in GTK at all.
Update tests to no longer expect <Primary> to roundtrip
through the accelerator parsing and formatting code.
This code needs to be redone differently, since keymaps are no
longer going to be exposed. There should really not be this much
ifdef-ed backend-specific code here anyway. Or any, really.
Add all of the keyboard translation results in the key event,
so we can translate the keyboard state at the time the event
is created, and avoid doing state translation at match time.
We actually need to carry two sets of translation results,
since we ignore CapsLock when matching accelerators, in
gdk_event_matches().
At the same time, drop the scancode field - it is only ever
set on win32, and is basically unused in GTK.
Update all callers.
The win32 backend is using GDK_MOD2_MASK for AltGr,
so define GDK_MOD2_MASK locally to keep this working,
but remove any mention of GDK_MOD3_MASK,...,GDK_MOD5_MASK.
These are never used in practice, and we never want to
see them in the UI, so stop supporting them. This is
in preparation for cleaning up GdkModifierType.
With C compilers defaulting to -fcommon, this isn't an issue, but
upcoming compilers (GCC 10 and Clang 11) will default to -fno-common,
ending up with duplicate definitions of these variables.
The colorbutton contains a button which contains a colorswatch.
We want the focus to go straight to the button, nowhere else,
so mark the swatch as !can-focus.
Adapt tests to match.
In the paths where len > MAX_LEN and cursor/anchor are separated by
at least MAX_LEN from text edges, we were clamping the right end of
the surrounding string at MAX_LEN. Oops.
This end anchor may go as far as the string length, although just
up to len - MAX_LEN in real terms (due to the condition above that
caches cursor/anchor positions being near enough the text end).
Closes: https://gitlab.gnome.org/GNOME/gtk/-/issues/2565
(cherry-picked from commit d7fb15c822)
It is hard to avoid widgets with the same name in a
large ui file - try harder to record a full focus chain
before decide that we've wrapped, by including the widget
address in the comparison. Note that we don't include
the addresses in the generated output, since that would
make expected output vary from run to run.
With the removal of `gdk_seat_grab` we do not need to keep the
definitions of `GdkGrabStatus` and `GdkGrabOwnership` public.
Move those definitions to become internal only.
`get_option('buildtype')` will return `'custom'` for most combinations
of `-Doptimization` and `-Ddebug`, but those two will always be set
correctly if only `-Dbuildtype` is set. So we should look at those
options directly.
For the two-way mapping between `buildtype` and `optimization`
+ `debug`, see this table:
https://mesonbuild.com/Builtin-options.html#build-type-options
When we reconfigure, `configure_file()` is called again, and
`*.gresource.xml` files are regenerated, which causes many (all?)
binaries to be relinked. Now we only write those out if the contents
actually changed (or if the output didn't already exist).
This is exactly what Meson already does with `configure_file()` when
`command:` is not used.
While we're at it, also do the same for `gen-c-array.py` and
`gentypefuncs.py` for completeness. Now even if the input to those
changes, re-building of those custom targets may not result in
relinking if the outputted C files have the same contents.
Entries and menubuttons are no longer focusable themselves,
they have focusable children. Since we don't have accessible
objects for those, transfer the focus-related state (focusable
and focused) from the children to the main accessible object.
We don't get a focus-out on the event controller, when
the surface is losing keyboard focus, since we are not
moving our focus to some other widget, so we are never
unsetting the mnemonics-visible property. Do that in
response to surface state changes instead.
When we `Alt+Tab` away from a GTK application, it loses keyboard focus.
If we don't clear the modifiers, events from other devices that we
receive while unfocused will assume `Alt` is still pressed. This results
in e.g. Firefox navigating through the history instead of scrolling the
page when using the mouse wheel on it.
We don't get any information about modifiers while we are missing
keyboard focus, so assuming no modifiers are active is the best we can
do.
The shell sends us a modifier update immediately before we regain
keyboard focus, so the state shouldn't get out of sync.
Fixes https://gitlab.gnome.org/GNOME/gtk/-/issues/2112
We are not loading the Compose file for individual contexts,
it just gets added to a global list. So don't pass an im context
along. This will let us move the loading out of the initialization
of individual contexts, and only do it once.
In addition to the traditional library directory lib and the 64-bit
multilib directory lib64, this will cover Debian-style multiarch
(lib/x86_64-linux-gnu etc.), Arch Linux 32-bit (lib32), x32 and
various others.
Signed-off-by: Simon McVittie <smcv@debian.org>
We were not properly setting the new_descendent field
in Crossing structs for GTK_CROSSING_OUT events. This
was causing extraneous ::leave signals to be emitted,
and make model buttons in popover menus flicker when
hovered.
Fixes: https://gitlab.gnome.org/GNOME/gtk/-/issues/2536
It doesn't work anymore, since popovers now need
support in the parent, and we don't really need
a demo just for popovers. They are used everywhere
already.
Fixes: https://gitlab.gnome.org/GNOME/gtk/-/issues/2429
Under grabbing circumstances we used to get several crossing events,
some corresponding to the grab itself and some corresponding to
pointer motion.
The backends now do a better job at keeping those simple, which
means we sit listening for events that don't actually arrive. This
triggers pointer focus issues when dragging windows or opening
grabbing popups.
Actually obey those events, they will be the only ones we get now.
Win32 backend doesn't have support for inhibit shortcuts, yet it needs
support the standard set of GdkToplevel properties.
Add support for the "inhibit-list" object property to GdkToplevel on
win32.
Broadway doesn't have support for inhibit shortcuts, yet it needs to
support the standard set of GdkToplevel properties.
Add support for the "inhibit-list" object property to GdkToplevel on
Broadway.
On X11, there is no such equivalent to the inhibit shortcut protocol
found on Wayland.
To implement the inhibit_system_shortcuts API on X11, we emulate the
same behavior using grabs on the keyboard.
To avoid keeping active grabs on the keyboard that would affect other
X11 applications even when the surface isn't focused, the X11
implementation takes care of releasing the grabs as soon as the toplevel
loses focus.
With the current implementation, we use a `wl_seat` as the key for our
internal has table where we store the Wayland shortcuts inhibitors.
There is however no technical reason for this, and we could use a
GdkSeat instead, which will ease the implementation of the GdkToplevel
shortcut inhibition API.
With the removal of grabs from the public API, we need a replacement API
to let applications bypass system keyboard shortcuts.
A typical use case for this API is remote desktop or virtual machine
viewers which need to inhibit the default system keyboard shortcuts so
that the remote session or virtual host gets those instead of the local
environment.
Close: https://gitlab.gnome.org/GNOME/gtk/issues/982
We are setting the month property to 10 different values,
checking that the change succeeds. But the calendar defaults
to the current date, so on every 30th of the month, we
try to set a date of Febuary 30, which fails.
Lets fix this before the 31st, by setting the calendar
to a good date.
When no printer has been selected (e.g. because we don't
find any printers), the 'print at' radio group should be
insensitive, except for the 'now' choice. Selecting another
option in this situation will lead to a crash.
When we stopped translating event coordinates in-place,
this function inadvertently started returning surface-relative
bounding boxes instead of widget-relative ones, as expected.
Fix this by using the widget-relative coordinates that we
already store.
We no longer translate event coordinates in-place,
so gdk_event_get_position() returns surface-relative
coordinates, not widget-relative ones. Just use the
coordinates we are given.
After commit 2ab9be54fb we had to rename
the generated CSS files to be included into the GResource bundle; we
kept the URI stable to avoid too much churn, and allow backporting the
change to the 3.24 stable branch. This had the adverse effect of making
it harder to debug issues, as the on-disk file name does not match the
location in the GResource that will be used to print out warnings,
errors, and debugging messages.
We're not returning a full reference for GtkNeverTrigger, but we are
returning full references for mnemonic and keyval triggers; this means
we're either going to leak mnemonic and keyval triggers if we consider
this function a "transfer none" one, or we are going to trigger an
assertion failure when finalizing a never trigger, if we consider this
function a "transfer full" one.
Let's be consistent, and always return a full reference to the caller.
Unfortunately, this involves copying a bunch of
code from gtkwindow.c. The only difference here
is that we add a private method to turn this off,
which will be used by GtkPopoverMenu to implement
its own auto mnemonics.
When a model button in a popover displays a shortcut,
it is probably from the global shortcut controllers,
and will not work inside the popover, since that is
a different native. Install a shortcut using the same
trigger that just activates the model button. This
shortcut will end up in the managed shortcut controller
of the popover.
The lightweight inheritance mechanism used for GtkShortcutTrigger is not
going to be usable by bindings, because boxed types cannot have derived
types.
We could use GTypeInstance and derive everything from that, like
GParamSpec, but in the end shortcuts are not really a performance
critical paths, unlike CSS values or render nodes.
GTK defines various types that are meant to be derivable only within GTK
itself, and "final" from the perspective of consumers of the GTK API.
The existing macros defined by GObject, such as G_DECLARE_FINAL_TYPE and
G_DECLARE_DERIVABLE_TYPE, lack this functionality.
While we wait for GObject to get this kind of macro, we should define
our own.
Make GtkShortcutController collect matching shortcuts
in the same way GtkKeyHash did (accept fuzzy matches
if we don't have any exact matches), and cycle among
the matches if we have multiple.
Copy the logic from GtkKeyHash for matching key events
to shortcuts.
Adapt shortcuts test to work with the better matching,
by creating more complete key events.
Allow GtkShortcutTrigger to return partial matches.
Currently, no triggers produce such results, and
GtkShortcutController treats partial matches like
exact ones.
People should use shortcut controllers instead (global, capture).
A side effect of this is that GtkAccelLabel now lost its method to
magically look up accelerators to display. Somebody needs to add that
back later.
API remains the same, but activation is now done via a
shortcutcontroller.
The code uses a controller with global scope so that the
shortcuts are managed with all the other global shortcuts.
This is mainly for internal use, but I can't see a reason to not have it
public for people who want to maintain their own lists.
I'm sure gnome-builder will never ever find a way to misuse it.
When creating shortcuts, there almost always are a trigger and an action
available for use. So make gtk_shortcut_new() take those as arguments.
Also add gtk_shortcut_new_with_arguments() so people can easily pass
those in, too.
Similar to GtkShortcutTrigger, GtkShortCutAction provides all the
different ways to activate a shortcut.
So far, these different ways are supported:
- do nothing
- Call a user-provided callback
- Call gtk_widget_activate()
- Call gtk_widget_mnemonic_activate()
- Emit an action signal
- Activate an action from the widget's action muxer
It's an outdated technology now that everybody is using GActionGroups.
If somebody wanted to support changeable shortcuts, they'd need to
reintroduce it in another way.
This adds an interface for taking care of shortcut controllers with
managed scope.
Only GtkWindow currently implements this interface, so we need to ensure
that we check if any top-level widget we reach is a shortcuts manager
before we call into it.
Mnemonics need to be triggered with help from the controllers (who
determine the modifiers). Support for that has been added, too.
Mnemonics do not use this yet though.
Allow setting the scope for a controller. The scope determines at what
point in event propagation the shortcuts will be activated.
Local scope is the usual activation, global scope means that the root
widget activates the shortcuts - ie they are activated at the very
start of event propagation (for global capture events) or the very end
(for global bubble events).
Managed scope so far is unimplemented.
This is supposed to be used to replace accelerators and mnemonics.
The function lives in gtkaccelgroup.c, so there's no need to have that
call a private function in another source file. Instead, make that
other source file call gtk_accelerator_get_label() instead.
The shortcut controllers are limited to same-native,
so we need to duplicate the Tab and arrow key bindings
for focus handling, as well as the Enter bindings for
activation.
And use it.
I just added it to GtkWidget just to show that I can.
The real reason I want it is for gamepad/joystick triggers
in games, so that it becomes possible to select 2 different
triggers (gamepad and keyboard) for the same shortcut.
This is a very barebones controller that currently does nothing but
activate the binding signals. Yay.
And because we have bindings on every widget (Yes, a GtkGrid has a
keybinding - 2 in fact), we need that controller everywhere.
This function is the replacement for
gtk_binding_entry_add_signall().
The GVariant will be demarshalled and passed to the action signal upon
binding activation. The same rules apply as used to apply for
GtkBindingArg, in that long, double and string args are now replaced by
"x", "d" and "s" variant types.
Add an api to retrieve the model containing a given
item in a flatten listmodel. This is useful when the
individual items in the list don't have backpointers.
We need to cleanup state here immediately so that we do not potentially
access the g_class private data after it been finalized. This ensures that
the borrowed reference is dropped by the muxer.
We used to either make the inspector see- and click-thru
or lower it, but sadly translucency broke after we
removed surface opacity, and lowering doesn't work
on Wayland. So just hide the inspector window while
we are picking.
Fixes: #2528
When inserting Pango markup into a text buffer, translate
Pango attributes for overlines and hyphenation control
into the corresponding text tag properties.
Add support for recently added Pango attributes
for overlines and hyphenation control. The new
properties of GtkTextTag are
overline, overline-rgba, allow-breaks, show-spaces
and insert-hyphens.
Before this commit, adding GtkWidgetAction to class private data would
require copying the actions to each subclass as they were built or
modified. This was convenient in that it is a sort of "copy on write"
semantic.
However, due to the way that GTypeInstance works with base _init()
functions, the "g_class" pointer in GTypeInstance is updated as each
_init() function is called. That means you cannot access the subclasses
class private data, but only the parent class private data.
If instead we use a singly linked list of GtkWidgetAction, each subclass
has their own "head" yet all subclasses share the tail of the
GtkWidgetAction chain.
This creates one bit of complexity though. You need a stable way to know
which "bit" is the "enabled" bit of the action so we can track enabled
GAction state. That is easily solved by calculating the distance to the
end of the chain for a given action so that base classes sort ahead of
subclasses. Since the parent class always knows its parent's actions, the
position is stable.
A new dynamic bitarray helper also helps us avoid allocations in all the
current cases (up to 64 actions per widget) and dynamically switches to
malloc if that is to ever be exceeded.
We want access to the private data from the action muxer so we can just
move the structures to the gtkwidgetprivate.h header. Alternatively we
could create accessors, but given that we'll probably need to use this
in other areas, seems reasonable to just put it there.
For some reason, these tests are flaky in ci,
they always work locally for me. So, until
we use the data these tests produce for something,
lets just turn them off.
The problem is caused by gtk_im_multicontext_set_slave(), which forgets
to disconnect these signal handlers:
* gtk_im_multicontext_retrieve_surrounding_cb
* gtk_im_multicontext_delete_surrounding_cb
If slave GtkImContext emits signal after GtkIMMulticontext context is
destroyed, this leads to reading freed memory, sometimes causing a crash.
Fixes: #2365
This makes meson actually parse the individual test
results. Most of the time, it does not make a difference,
but one case where it does is when all the individual
tests of a binary are skipped, meson will mark the
test as skipped.
The background-image-multiple.ref.ui file uses
non-existing properties, which gives us a g_warning,
and the glib test framework insists on treating
warnings as fatal, so we end up doing exit(133),
which in turn makes the meson TAP parser ignore
its xfails.
Comment out the nonexisting properties, so we can
fail properly, and then in turn xfail properly.
At the bottom, it sometimes has to fight for the same position than
text handles, besides might not be ergonomically convenient (eg.
finger/hand partly covering the popover). Move it at the top to fix
both.
At the bottom, it sometimes has to fight for the same position than
text handles, besides might not be ergonomically convenient (eg.
finger/hand partly covering the popover). Move it at the top to fix
both.
This ensures the popover will follow the new position parameters. This is
necessary for popovers like the text magnifier that can be repositioned
while visible.
Instead of being a GObject managing two GtkWidgets, make GtkTextHandle
a GtkWidget subclass, representing a single handle.
From the perspective of users (GtkText and GtkTextView), this is not a
big leap since they have to be aware of a great deal of text handles'
state. It actually makes things more direct and simple.
With text handles being widgets, those can be actual children of the
widget, and may have their own GdkSurface that we move around at will.
This is the second major aspect of this refactor.
People should use shortcut controllers instead (global, capture).
A side effect of this is that GtkAccelLabel now lost its method to
magically look up accelerators to display. Somebody needs to add that
back later.
API remains the same, but activation is now done via a
shortcutcontroller.
The code uses a controller with global scope so that the
shortcuts are managed with all the other global shortcuts.
Reduce the amount of special casing by using a list model
for global and managed shortcuts, too.
This way, the ListModel API will work for the ShortcutController in the
GtkShortcutManager and GtkRoot.
The only special case remaining is shortcut activation, which needs to
pass the right widget to the controller in the global/managed case.
This is mainly for internal use, but I can't see a reason to not have it
public for people who want to maintain their own lists.
I'm sure gnome-builder will never ever find a way to misuse it.
When creating shortcuts, there almost always are a trigger and an action
available for use. So make gtk_shortcut_new() take those as arguments.
Also add gtk_shortcut_new_with_arguments() so people can easily pass
those in, too.
Similar to GtkShortcutTrigger, GtkShortCutAction provides all the
different ways to activate a shortcut.
So far, these different ways are supported:
- do nothing
- Call a user-provided callback
- Call gtk_widget_activate()
- Call gtk_widget_mnemonic_activate()
- Emit an action signal
- Activate an action from the widget's action muxer
- Activate a GAction
It's an outdated technology now that everybody is using GActionGroups.
If somebody wanted to support changeable shortcuts, they'd need to
reintroduce it in another way.
This adds an interface for taking care of shortcut controllers with
managed scope.
Only GtkWindow currently implements this interface, so we need to ensure
that we check if any top-level widget we reach is a shortcuts manager
before we call into it.
Mnemonics need to be triggered with help from the controllers (who
determine the modifiers). Support for that has been added, too.
Mnemonics do not use this yet though.
Allow setting the scope for a controller. The scope determines at what
point in event propagation the shortcuts will be activated.
Local scope is the usual activation, global scope means that the root
widget activates the shortcuts - ie they are activated at the very
start of event propagation (for global capture events) or the very end
(for global bubble events).
Managed scope so far is unimplemented.
This is supposed to be used to replace accelerators and mnemonics.
The function lives in gtkaccelgroup.c, so there's no need to have that
call a private function in another source file. Instead, make that
other source file call gtk_accelerator_get_label() instead.
The shortcut controllers are limited to same-native,
so we need to duplicate the Tab and arrow key bindings
for focus handling, as well as the Enter bindings for
activation.
And use it.
I just added it to GtkWidget just to show that I can.
The real reason I want it is for gamepad/joystick triggers
in games, so that it becomes possible to select 2 different
triggers (gamepad and keyboard) for the same shortcut.
This is a very barebones controller that currently does nothing but
activate the binding signals. Yay.
And because we have bindings on every widget (Yes, a GtkGrid has a
keybinding - 2 in fact), we need that controller everywhere.
This function is the replacement for
gtk_binding_entry_add_signall().
The GVariant will be demarshalled and passed to the action signal upon
binding activation. The same rules apply as used to apply for
GtkBindingArg, in that long, double and string args are now replaced by
"x", "d" and "s" variant types.
If we have never seen a GtkTextTag in the GtkTextTagTable with the
invisible bit set, then we do not need to go through the process of
checking the accumulated tags.
Not using invisible tags is overwhelmingly the common case.
The shortcut controllers are limited to same-native,
so we need to duplicate the Tab and arrow key bindings
for focus handling, as well as the Enter bindings for
activation.
Without this, the back buffers of the wrong size
keep being used, causing flickery misdraws, as
seen when expanding the expander in the popover
in widget-factory.
surface->x/y (and various x,y arguments) should be in the parent
coordinates, so treat it as such. We also keep track of the root coords
as these are needed for popup positioning.
Also, drop the isTemp property server side and the weird initial
placement at (100, 100) in the daemon. We now fully control window
placement from the client instead. If this is not we want we should do
a serious design for that but until then lets do the simplest thing.
In firefox, onload will trigger when the image is loaded, but at
that point it may not be decoded yet so showing it will sometimers
trigger flashes. We use the new decode() feature instead which ensures
both that the image is loaded *and* decoded, thus fixing the flashes.
These fixes were done blindly, to make the ci pass,
and will need review by somebody with access to an
actual win32 system to make sure the surface subtypes
are implemented properly.
There is no shape combining going on anymore, so
call this just gdk_surface_set_input_region, and
remove the offset arguments too. All callers pass
0 anyway.
Update all callers and implementations.
This is not quite right, and only temporary, since
it makes GDK_IS_POPUP (surface) true for every surface.
Eventually, the implementation will be moved to the
backends.
The label and action_name entries of GtkPadActionEntry are supposed to
be const, so copy them into a private ActionEntryData struct that we
later free.
The iter may be invalid, so we may not read from it.
testsuite/gtk/treemodel tests this and valgrind is shouting about it,
but it never crashed until I just ran it...
This bug is from 2004 and the test is from 2007. I guess invalid memory
accesses don't get caught by CI much.
Sprinkle various g_assert() around the code where gcc cannot figure out
on its own that a variable is not NULL and too much refactoring would be
needed to make it do that.
Also fix usage of g_assert_nonnull(x) to use g_assert(x) because the
first is not marked as G_GNUC_NORETURN because of course GTester
supports not aborting on aborts.
The `rename-to` annotation is used to "shadow" a symbol with another
one, which means both symbols need to exist. It can't be used to rename
a symbol to something else.
This way, we can ensure that for local same-type drops the GValue
is set when ::enter is emitted.
This is the common case for dnd between widgets inside larger
applications, so it's worth it to speed it up.
Before, gtk_drag_icon_new_for_drag() allowed creating new drag icons.
This could cause multiple drag icons to exist for a single drag.
Now, gtk_drag_icon_get_for_drag() makes sure that only one drag icon is
created.
This is a huge reorganization of GtkDropTarget. I did not know how to
split this up, so it's unfortunately all one commit.
Highlights:
- Split GtkDropTarget into GtkDropTarget and GtkDropTargetAsync
GtkDropTarget is the simple one that only works with GTypes and offers
a synchronous interface.
GtkDropTargetAsync retains the full old functionality and allows
handling mime types.
- Drop events are handled differently
Instead of picking a single drop target and sending all DND events to
it, every event is sent to every drop target. The first one to handle
the event gets to call gdk_drop_status(), further handlers do not
interact with the GdkDrop.
Of course, for the ultimate GDK_DROP_STARTING event, only the first
one to accept the drop gets to handle it.
This allows stacking DND event controllers that aren't necessarily
interested in handling the event or that might decide later to drop
it.
- Port all widgets to either of those
Both have a somewhat changed API due to the new event handling.
For the ones who should use the sync version, lots of cleanup was
involved to operate on a sync API.
First, it should have been a GdkDrop, but even then, proper DND code
should not rely on internals.
It's only been used in an unused signal emission anyway.
This might happen for slow filesystems where a fast-content-type might
be provided instead. Don't try to manipulate that content_type if it's
NULL, otherwise we'll either throw warnings (at best) or crash (at
worse).
Conflicts:
gtk/gtkfilechooserwidget.c
It is enough to just set the parent (and make the parent
call gtk_native_check_resize in size_allocate).
This commit removes the relative_to argument to the
constructors of GtkPopover and GtkPopoverMenu, and
updates all callers.
Drop the input-mode, since it only makes sense for
floating devices, which we don't have anymore. And renamt
::input-source to ::source, to match the getter.
Update all users.
replace all uses with const char * (non-interned).
Also remove a lot fo juggling from atom to GdkAtom to string and back.
The X Atom hash table is now mapping to (again, non-interned) strings.
We were not properly converting the coordinates we
got to root coordinates. This was showing up as offsets
between the actual drop target and the area where drops
can happen, e.g. when dragging over a stack switcher
to switch pages.
We were forgetting to clean up the ::xevent signal
handler in some error cases. Move the signal connection
later, when we know the drag is going forward, and
use g_signal_connect_object to make sure the signal
handler is not forgotten.
The preview widget harks from a platform before time, when we didn't
have GIO, or a thumbnail specification.
Very few applications use it correctly, if at all; it has an horrid hack
to deal with the ownership of the widget's instance when accessed
through the getter function; it messes up the layout of the widget and
its label is less than useful when it comes to file names longer than a
dozen characters; it's a poor substitute for a proper thumbnail view.
GtkFileChooser's API predates GIO by a few years, so it started off with
filenames and URI as character arrays. After introducing GIO as a
dependency, the API included GFile-based entry points.
It's much more appropriate to use GFile everywhere, as we want to
encourage people to use GIO instead of passing random bytes to low level
POSIX API.
See: #2455
... and use one controller per button instead of using it on the
switcher and then going through lots of pain attempting to find the
right button for the location under the mouse.
This is in particular relevant for the ::is-focus property, because
updating that one doesn't cause enter/leave events.
But it also checks that notify and enter/leave happen in the right
order.
Emit crossing events - with a new GTK_CROSSING_DROP type - like we do
for motion events. There is no more special casing for them.
Note that the gesture has not been updated yet, so some obscure behavior
may occur.
This allows treating drop events like touch events, which GTK groups by
event sequence.
It's a bit ugly that we just case the GdkDrop pointer, but event
sequences are only meant to be unique pointer ids, so it's fine.
And in particular, only do it if the widget doesn't use ALIGN_FILL.
This avoids lots of measuring in the common case and speeds up
size_allocate() by about 25%.
And because size_allocate() is the bottleneck in the fishbowl, this also
gets ~25% more fishies.
Widgets should be given the actual size they will be allocated, so they
can do something with it.
If they want to clamp themselves to their natural size, nothing's
stopping them, they know their natural size after all.
It's the native's job to request a 1px x 1px size, not the job of
gtk_widget_size_allocate()
Also saves 10% of size_allocate() time because checking for an interface
is really expensive.
FIXME: Is this necessary?
Could the surfaces just clamp to 1x1 themselves?
We recently declared that surfaces can decide on whatever size they want
so natives need to inspect the size they requested anyway.
We are using (dddd) variants to store colors in variants,
which is dangerous now that GdkRGBA members are just floats.
Avoid passsing the GdkRGBA members directly to any varargs
functions.
When a popup is already showing, and gdk_surface_present_popup() is
called, if the layout didn't change, we're not really interested in
relayouting.
In the future, we'll be able to get notified if position of the popup
would change by some environmental changes, but until then, just don't
support it.
Transforming identity by an other transform does not mean we need to
painstakingly apply the individual steps of other to construct a new
transform, it means we can just return other.
Or in math terms:
I * B = B
so just return B.
We don't want to expose the GtkCrossingData struct, and manually
feeding events to event controllers is not something we want to
encourage, going forward.
Split the focus tracking into a separate
GtkEventControllerFocus, and change the API one more time.
We are back to having ::focus-in and ::focus-out signals.
Update all users.
Add fields for direct descendents to GtkCrossingData,
and populate them when emitting focus change events.
Also add accessors for these fields to GtkEventControllerKey,
and verify that they are set properly in the focus test.
Not done yet: Do the same for pointer crossing events.
Rearrange a few things, and move some booleans
into the Any struct, by using a bitfield there.
Some more cleanup could be done - the flags field
with its PENDING and FLUSHED members appears
entirely unused. Nobody is setting those flags.
Restructure the getters for event fields to
be more targeted at particular event types.
Update all callers, and replace all direct
event struct access with getters.
As a side-effect, this drops some unused getters.
Instead of relying on gdk's antiquated crossing events,
create a new GtkCrossingData struct that contains the
actual widgets, and a new event controller vfunc that
expects this struct. This also saves us from making sense
of X's crossing modes and details, and makes for a
generally simpler api.
The ::focus-in and ::focus-out signals of GtkEventControllerKey
have been replaced by a single ::focus-change signal that
takes GtkCrossingData as an argument. All callers have
been updated.
We want to make events readonly, so stop translating
their coordinates and instead pass the translated
coordinates separately, when propagating events.
Make the event translator return a new event, instead of
filling in a half-constructed one.
Update the two implementation in GdkX11Display and
GdkDeviceManagerXI2.
Instead of passing a half-constructed event and expect
it to be filled in, pass the surface as in argument, and
add an out argument for a newly constructed GdkEvent.
Add private API to construct events. This is a step towards
making events readonly, and not objects anymore.
The constructors here are sufficient to convert the Wayland
backend over. More may be added for other backends as needed.
Open issues:
- history
This is triggered by typing / or hitting Ctrl+L. Since we don't have a
visual indicator for this mode right now anyway, the reason for not
allowing it in recent mode cited in the comment just above the
early-exit is irrelevant.
Closes#2178
Replace the gdk_surface_move_to_rect() API with a new GdkSurface
method called gdk_surface_present_popup() taking a new GdkPopupLayout
object describing how they should be laid out on screen.
The layout properties provided are the same as the ones used with
gdk_surface_move_to_rect(), except they are now set up using
GdkPopupLayout.
Calling gdk_surface_present_popup() will either show the popup at the
position described using the popup layout object and a new unconstrained
size, or reposition it accordingly.
In some situations, such as when a popup is set to autohide, presenting
may immediately fail, in case the grab was not granted by the display
server.
After a successful present, the result of the layout can be queried
using the following methods:
* gdk_surface_get_position() - to get the position relative to its
parent
* gdk_surface_get_width() - to get the current width
* gdk_surface_get_height() - to get the current height
* gdk_surface_get_rect_anchor() - to get the anchor point on the anchor
rectangle the popup was effectively positioned against given
constraints defined by the environment and the layout rules provided
via GdkPopupLayout.
* gdk_surface_get_surface_anchor() - the same as the one above but for
the surface anchor.
A new signal replaces the old "moved-to-rect" one -
"popup-layout-changed". However, it is only intended to be emitted when
the layout changes implicitly by the windowing system, for example if
the monitor resolution changed, or the parent window moved.
We can map a non-grabbing popup wherever, it's just the grabbing
popup-chain that needs to be ensured not to break any ordering rules.
Fix this by managing two lists; one of open popups, and another for
grabbing ones.
The returned position should be relative to the parent surface, but
GdkSurface::x,y were only managed properly for O-R windows. This makes
it correct for regular windows too.
Now popups surfaces are always created with the parent set, so we don't
need to implement vorious guess work to try to find what the parent
might be. Remove that code and just use GdkSurface::parent which is
where the parent set during construction ends up at.
Add event queues specifically for surface configuration events
(xdg_surface.configure, xdg_toplevel.configure, xdg_popup.configure etc)
so that a configuration can be completed without having side effects on
other surfaces. This will be used to synchronously configure specific
GdkSurfaces, as is needed by the Gtk layout mechanisms.
The freezing is conditioned on various state, so lets make the thawing a
bit more robust. Without this there was a risk that we'd thaw too many
times if there was a frame callback requested while the conditions for
the freezing were not met.
Changing the autohide property means the popover needs to be remapped.
Remapping may need user interaction, so lets just unrealize the popover
if the property changes, forcing the application to remap it should it
be shown again.
Add properties, and use string arrays instead of lists.
Among other things, this renames gtk_icon_theme_list_icons
to gtk_icon_theme_get_icon_names.
Fixes: https://gitlab.gnome.org/GNOME/gtk/issues/2410
By running it in the capture phase, it will not be starved for events by
the button's click source and make drags actually start a color drag
operation.
Actually use GValues for the DND operation instead of sending GBytes of
pointer addresses through pipes.
This is a bit complicated because we need to special-case rootwindow
drops, because they're handled on the source side, so we need a custom
ContentProvider.
Enter the Emoji inseration in the undo history.
Also, stop stashing away the selection when we
pop up the Emoji chooser, and use the selection
as-is when we insert the Emoji.
The old code did mimetype checks everywhere when type compatibility has
since been moved to the GtkDropTarget::accept signal.
So the code can now just assume a compatible mime type exists.
Content providers are meant to be immutable, apart from very special
cases, but in those cases they need to emit
gdk_content_provider_content_changed().
Having a constructor that just uses a get_func invites abuse of this
by not making developers aware of those requirments.
In fact, all users in GTK failed to do this.
Instead, code should use the GtkDragSource::prepare signal to create
content providers when needed.
The same problem exists with gdk_content_provider_new_with_formats(),
but this commit doesn't touch that.
In Vala and JS at least, gtk_widget_get_css_name() and
gtk_widget_class_get_css_name() are resolved to
GtkWidget.get_css_name().
To avoid this problem, we rename the class version.
Otherwise the compositor gets all confused when it's trying to make
drag happen but we know it's not going to happen.
After all, we exchange data behind its back, we just need to keep it
informed.
1. GdkDrop does deserialization, so add the deserialize formats
2. If the drop is local, we can copy straight from the drag, so we can
also copy all its formats. This fixes cases where the backend would
drop formats it doesn't support.
Accessors like these are weird to have and we can add widgets to the
content area via gtk_container_add() as well as add widgets to the
action area via gtk_info_bar_add_action_widget().
Some systems (notably macOS) will not allow enumeration of an extension that has been promoted to core OpenGL for context in use. This change assumes that GL_ARB_timer_query is available on OpenGL 3.3+.
I could not find definitive information on whether GL_ARB_debug_output or GL_KHR_debug have been added to core. Other extensions in use were addressed by https://gitlab.gnome.org/GNOME/gtk/merge_requests/1422 .
For a given OpenGL context, macOS in particular does not support enumeration / detection of OpenGL features that have been promoted to core OpenGL functionality. It is possible other drivers are the same. This change assumes support for GL_ARB_texture_non_power_of_two with OpenGL 2.0+, GL_ARB_texture_rectangle with OpenGL 3.1+ and GL_EXT_framebuffer_blit with OpenGL 3.0+. I failed to find definitive information on whether GL_GREMEDY_frame_terminator has been promoted to OpenGL core, or whether GL_ANGLE_framebuffer_blit or GL_EXT_unpack_subimage have been promoted to core in OpenGL ES. This change results in a significant GtkGLArea performance boost on macOS.
Closes#2428
The function is fundamentally broken for unbounded surfaces.
If a surface is unbounded, we cannot represent this as a
cairo_rectangle_int_t, and using the return value doesn't work because
it's already used for something else.
In GTK3, unbounded surfaces aren't a problem, but GTK4 uses recording
surfaces.
So better remove that function before we keep using it and using it
wrong.
Compute the pattern matrix directly instead of transforming the cairo_t.
This ensures that when node_size / texture_size is some obscure floating
point value, we don't get rounding issues from scaling by it once we
draw the texture_size rectangle.
I have no actual failure where this comes in handy, but I had written
the code anyway, so decided to keep it.
graphene treats equality for contains() operations as always matching,
so do the same thing.
This is because unlike integer math, floating point cannot do the "as
close as possible to the point, but not reaching it" operation that
integer does by just subtracting 1.
Commit 47c44644b1 was a bit overzealous in fixing
compiler warnings. We still need to call collect_textures,
even if we don't need the number that it returns.
It seems that Meson's gnome.compile_resources() cannot deal with two
files with the same name under different directories, which breaks the
build parallelism because the GResource file ends up not depending on
either the Adwaita or the HighContrast gtk-contained.css file.
This commit only changes the on-disk names of the Adwaita and
HighContrast SCSS files, and the corresponding generated CSS files; the
files in the GResource are going to be aliased to the old file names, to
minimise the breakage. We might want to change the theme entry points at
some later date, if we decide to commit to this naming scheme.
Fixes: #2423
See Meson bug: https://github.com/mesonbuild/meson/issues/6615
We currently disable when draw()ing nodes using the cairo fallback path,
which means we can't just use cairo_paint(). Use a proper rectangle
instead.
Fixes#2431
The marks are averaged based on the name, so this makes more sense.
Also rename the map/unmap marks to have the same capitalization as
everything else.
I was getting CI failures like:
../gdk/gdkprofiler.c: In function ‘add_markvf’:
../gdk/gdkprofiler.c:111:3: error: function ‘add_markvf’ might be a candidate for ‘gnu_printf’ format attribute [-Werror=suggest-attribute=format]
This drops the marks for before/after-paint as they are internal
things that very rarely use any time, and also flush/resume-events
as any events reported here will get separate marks so will be easy
to see anyway.
Also, we rename the entire frameclock cycle to "frameclock cycle"
rather than "paint_idle" which is rather cryptic.
These don't take a duration, instead they call g_get_monotonic_time() to
and subtract the start time for it.
Almost all our calls are like this, and this makes the callsites clearer
and avoids inlining the clock call into the call site.
When we use if (GDK_PROFILER_IS_RUNNING) this means we get an
inlined if (FALSE) when the compiler support is not compiled in, which
gets rid of all the related code completely.
We also expand to G_UNLIKELY(gdk_profiler_is_running ()) in the supported
case which might cause somewhat better code generation.
usec is the scale of the monotonic timer which is where we get almost
all the times from. The only actual source of nsec is the opengl
GPU time (but who knows what the actual resulution of that is).
Changing this to usec allows us to get rid of " * 1000" in a *lot* of
places all over the codebase, which are ugly and confusing.
This allows us to avoid hand-rolling g_strdup_printf calls,
but also moves the printf into the called function where
it doesn't bloat the code of the calling function if the profiler
is not running.
This is similar to how we share texture atlases. Some added complexity
in that the program state also needed to be shared, so it had to move to
the shared Programs object.
With this change realization of additional GskRenderers when opening
popups went from ~60msec to ~35 msec on average.
We need to investigate release-specific failures, and possibly fix our
test suite to deal with debug-specific poking through the internal
state.
For the time being, allow the release job to fail, but this is strictly
a temporary measure.
We are going to need to hide the report generation into the test runner
script, as we want the job to produce the reports even in case of
failure, instead of bailing out immediately.
Now that we figured out why the build was failing on Fedora when the
profiling code was enabled, we can go back to building both shared and
static libraries by default.
We should have a single job for building both static and shared
versions of GTK. On the other hand, having a separate job for the
release build would be a plus.
Additionally, we shouldn't use an opaque script to build GTK; the only
step in the process that requires hand-holding is running the tests
suites under Xvfb, and having the build options visible from the YAML
file gives us a better idea of what kind of build we're running.
As pointed out in https://gitlab.gnome.org/GNOME/gtk/issues/1481
and seen from critical warnings with swinging revealers in widget-factory
there are some size allocation issues in GtkRevealer.
What happens is that we request a size of the revealer itself
based on the child natural size and the current stage of the transition
by applying a scale to the natural size. We then round up to nearest
int size. However, we want the widget to render as if it did get the
natural size so we can transform it, rather than the scaled down size.
For example, a label should not start ellipsizing in the animation.
So we inverse the scale when allocating the child.
Unfortunately, for very small scales the inversion of the scale can
result in very large sizes, and for such scales we rounded up the
requested size to 1, so we will be allocating huuuuge children.
In order to avoid such issue we pick an arbitrary maximum upscale
scale factor of 100. This means that in the case where the allocated
size is 1 we never allocate the child at > 100 px. This means
that in large downscaling cases we may run into the clipping issue
described above. However, at these downscaling levels (100 times!)
we're unlikely to notice much detail anyway.
I was getting assertions that normalize_angle() failed the
result < 260 check. Doing some research on this it turns out
to be a precision issue. If the incomming angle is very slightly
below zero, then adding 360 to it may end up with exactly 360.
I simplified the code a bit to avoid division and rounding, because in
practice most angles will be "just outside" the 0-360 degree anyway.
And i also added a workaround for the "result is 360" case by just
setting it to 0.
When rendering ops to an offscreen texture we take max-texture-size
in consideration and modify the scale we use such that the required
texture does not exceed the limit.
This means some rendering will be blocky/fuzzy, but that is better
than it being clipped.
We can't just use the outline rect and apply the border radius because
the outline box is the border box grown by the outline offset, which
will also grow the resulting border radius.
Fixes#2425
This tests was testing gestures by faking an event in the
middle of a window that has a hbox with an expanding image in it.
For me (and I guess this depends on all sorts of issues like whether
CSD is enabled, font sizes, etc) the hbox ended up centered horizontally
but not vertically (probably because of csd at the top), so no events
ever hit the inner widgets.
This is fixed by emitting the events at allocation.x/y of the
hbox, which should contain both the hbox and the image (as it expands).
All the code in e.g. init_randr15() divides the physical resolutions with
the screen scale, however if we get the screen scale from xsettings
rather than e.g. GDK_SCALE the initial setup is using the wrong value.
So, whenever the screen scale size is changed we need to trigger
a re-read of the randr data
We test this by looking at the produced render nodes now that
we don't actualluy scale the icon. Also, it turns out that this
code was broken due to some typos, so we also fix those.
If you called gtk_icon_theme_lookup(), then always return some useful
icon name from gtk_icon_paintable_get_icon_name(), even if we picked
an unthemed icon.
Also rewrite the gtk_icon_paintable_get_icon_name() docs to make this
clearer.
In GTK2, the filechooser was using a Paned, so switching between sidebar
and files list with the arrow keys didn't work (the slider would be
selected instead). So in
https://bugzilla.gnome.org/show_bug.cgi?id=161489 a crude hack was added
to make this possible.
Over the years the filechooser code has changed so that it now would do
this by default, yet the hack had been retained.
It is not great to put a function in the public api and
document it as "do not call this" only so we can refer
to its docs in other places. Therefore, fold the docs
directly into the input handling overview chapter.
These are always set to the same value as the corresponding border
radius properties. They are also non-standard, so remove them and
replace them with the border radius properties everywhere.
Fixes#2414
When we are loading symbolic pngs or svgs, we know
that we need to the png or svg loader, so there is
no need to go through (surprisingly expensive) mime
sniffing to find the right loader.
It doesn't really make sense to treat double clicks here different than
single clicks (and is bad UX), and it also breaks switching months by
quickly trying to single-click the last/first days in the calendar.
This is an unused feature that's way too complicated for a default
calendar widget and complicates the implementation a lot. Since we want
to eventually replace this with actual widgets, remove the details
support now.
These will replace the previous gtk_snapshot_new_with_parent(), which
allocated an entirely new GObject just to push()/pop() some state. This
is already a problem but will be more important in the future as we
start using this more.
When reaching this point, it is impossible that all border styles are
HIDDEN or NONE, but up to 3 of them can still be that style. In any
case, the "none or solid" border style is the most common on there is,
so try to make this simpler here by just appending a border node
directly instead of going through the snapshot_border path.
Hide the expensive GTK_IS_ROOT() checks behind the cheaper realized,
mapped, etc. checks. This way we only check for the widget being a root
if the invariant does not hold.
This gets pop_verify_invariants() from 16% to 6% when running the
scrolling benchmark in the widget-factory.
When the css is validated we know the css size, so we can
create the paintable at that point, and we do so passing the
LOAD_IN_THREAD flag.
This causes us to load most icons early on, in parallel instead of
during the first snapshot.
Instead of having the IconTheme have a hashtable that owns
individual strings and then IconThemeDirSize have a similar
hash (but with the strings owned by the other hash), we
have a consecutive memory chunks where we store the icon names
and then the hashtable has pointers into this.
This means we can avoid a bunch of individual strdup()s in a
way that is less fragmented and wastes less space. Additionally,
since we do an initial lookup anyway we have the internalized
icon name during lookup which means we can use g_direct_hash/equal
instead of g_str_hash/equal making the lookup faster too.
If there is a passive grab and the pointer leaves the window we would
receive a GDK_CROSSING_NORMAL event when the pointer moves outside
the window, and a GDK_CROSSING_UNGRAB event when we do release the
button and the implicit grab.
We currently would react to the first, but want to react to the
second. In the time between both events, the client would still receive
pointer motion that will reach the implicitly grabbed widget.
Closes: https://gitlab.gnome.org/GNOME/gtk/issues/13
We've started to turns containers into widgets which
just happen to have children, and some of these need
to be exposed to the a11y stack.
This adds a very minimal implementation, it does not
currently emit change notification when children are
added or removed.
Downloading the subproject during the GTK build fails
in a flatpak build due to lack of network access.
flatpak-builder insists on having these things explicitly
spelled out as dependencies.
These now render the paintable to a cairo surface and convert that
to a texture. This is sort of a hack, but its only used in two
special cases internally and in two hacky test apps.
This changes gtk_text_buffer_insert_texture() to
gtk_text_buffer_insert_paintable() which is strictly more useful
(as textures are paintables). It also fixes the code to actually
support drawing the paintables (as well as tracking changes
to the paintables.
If icon lookup fails or if loading it fails later, just always
fall back to the built in image-missing icon. Nobody is handling
missing icons in a sane way anyway.
If you *truly* need to handle missing icons, you need to manually
use gtk_icon_theme_has_icon().
While changing the loading code I also fixed an issue where it
was always passing "png" to pixbuf, now it also handles "xpm" if
that is the filename suffix.
We had a pretty complex setup where we tried to avoid scaling up themes from dirs
that specified a size. However, not only was it very complex, but it didn't quite
work with window scales, because when using e.g. a size 32 directory for 16@2x
the dir size is wrong anyway. Additionally it turns out most code either picks
an existing icon size, or uses the FORCE_SIZE flags, so it doesn't seem
like a useful behaviour.
This change drops the FORCE_SIZE flags, and always scales
icons. Additionally it moves the scaling of the icon to rendering,
which seems more modern, and allows us to (later) share icons loaded
for different sizes that happened to use the same source file (at
different scales).
Note that this changes the behaviour of
gtk_icon_paintable_download_texture() is it now returns the unscaled
source icon. However, ignore thats, as I plan to remove this function
and replace it with a way to render a paintable to a cairo-surface
instead.
It never makes sense to paint a texture that needs recoloring. If
you call the regular snapshot on a symbolic texture we just use the
default recoloring colors.
To support this we also change gtk_css_style_snapshot_icon_paintable()
to call gtk_icon_paintable_snapshot_with_colors() for IconPaintables
so that we get the correct colors, and we make it not emit the color
matrix.
Since we now rely on the icon to do the recoloring we also drop the
recolor argument in gtk_icon_paintable_snapshot_with_colors() as its
not needed anymore.
It it hard to control which of the csd style classes we get,
since it depends on details of the X server or compositor.
Explicitly ignore this difference by replacing .solid-csd
with .csd in the output.
When we dismantle our children in dispose, we
trigger a11y children-changed signals which end
up calling back into the notebook. Handle this
without critical warnings.
Only update the action state when we have a text buffer,
there is no need to do it otherwise, since we are going
to get a buffer before we get shown. This avoids triggering
the action state updates from finalize, which is a bad
time to be recreating the action muxer.
The accessible gets properties of the entry, and
resetting the entry icons triggers accessible change
notification, so do that before we dismantle the entry
too far to respond to a g_object_get () call.
Stylecontexts are on their way out and I'm removing API that the
testsuite was relying on, so remove the tests.
Put the useful parts of the tests elsewhere.
1. Rename the thing
2. Turn it from a signal to a vfunc
3. Pass the GtkCssStyleChange to it
We don't export any public API about the GtkCssStyleChange yet, it's
just a boring opaque struct.
Instead, rely on people passing fallbacks explicitly.
Alternatively, GThemedIcon provides the functionality to create
fallbacks, which is what GtkImage and the testsuite now use.
That method is slightly better, too, so the expected test results
have been updated accordingly.
There is no way to query contexts or do anything useful with them.
So don't keep track of them and don't make them an argument in public
APIs with the docs saying "I don't know what to use here, maybe read
some spec somewhere".
Those functions are unused and the documentation says "Returns some
random number that the icon theme creator chose" which does not seem at
all useful and an implementation detail.
So get rid of it.
We're not in the business of adding Cairo APIs. That's Cairo's job.
Also, we don't need this API anywhere like the original commit claimed,
so there's no need to make it available in any way.
This reverts commit afa6cc2369.
We expose no API to get at any colors for drawing symbolics, so we
shouldn't have APIs to draw with them.
Apart from that, those APIs look like a box of crayons, not like an
icontheme.
Most users were just forgetting to set the proper flags.
And flags aren't the right way to set this anyway, it was just
acceptable as a workaround during GTK3 to not break API.
The API encouraged wrong usage - most of the users were indeed wrong.
Use the correct version instead:
gtk_icon_theme_get_for_display (gtk_widget_get_display ())
All the a11y tests were failing for me with a window state diff
like this:
- state: active enabled resizable sensitive showing visible
+ state: enabled resizable sensitive showing visible
I guess the windows in the CI always gets the focus, but not when
I run it here. Generally focus seems asynchronous and hard to rely
on so I just made the test ignore the active state on toplevels.
These days initilizing gtk may create a connection to the sesson bus,
so we have to initialize GTestDBus before initalizing gtk, or we'll
use the address of the "real" session bus (and remember that in the
global).
To further muck things up, g_test_dbus_up() resets important env
vars like DISPLAY and XDG_RUNTIME_DIR, which we have to re-set.
This was blocking the clean exit from the testdbus shutdown in
the defaultvalues test. The proxy was keeping the connection alive
which blocks g_test_dbus_down().
Fix up the index computation. We have duplicate entries
in the type enum, so to go from one of the 'initial' types
to it corresponding type you subtract one, but to find
the size array entry for a type, you divide by 2.
It turns out with the icon cache now using the virtual SYMBOLIC_PNG_SUFFIX
flag the two enums are now identical, so lets just use one of them, the
one GtkIconCache (so we move it to the header).
This adds a GDK_DEBUG=default-settings flag which disables reads
from xsettings and Xft resources, and enables this for the testsuite.
This is one less way to get different testresults depending on the
environment. In particular, it was failing the css tests for me
due to getting the wrong font size because i have a different dpi.
This is a useful widget to have, and it has minimal api.
Not having it public forces apps to recreate a lot of
complicated machinery for not good reason, if they need
an Emoji chooser in a different context.
Traditionally the icon lookup for a theme has been:
lookup (icon_name, size):
best_directory = NULL
forearch theme
foreach directory in theme
if dir_size_matches (directory, size) && dir_has_icon (directory, icon-name)
best_directory = chose_best_size_dir (best_directory, directory)
if best_directory
return icon from best_directory
However, it turns out that there are a lot of subdirectories which have the same
size, as they differ only in the (essentially useless) "context" value. For example
the "16x16/apps" subdirectory is essentially the same as the "16x16/actions" one.
So, instead rathern than keeping all the directories as separate we store the
all the directories with the same size as a single entity (DirSize) and the
icon lookup in that DirSize looks up not only which suffix to use for that icon
but also which subdir it is in.
Additionally we keep a hashtable with all icon names that are
available in the entire theme (i.e. all DirSizes), which allows use
both to store each icon name only once, but also to do a quick
negative lookup and early exit in case we're looking up an icon that
doesn't exist. This is pretty common because we often look up sets of
icons like "image-png-symbolic", "image-png", "image", expecting some
to fail.
This brings down the time of the initial css validation from 20msec to 15msec for
me when running icon-factory.
This lists the icons in a particular director, with their flags in a
hashtable. We also convert from "icon.symbolic" + SUFFIX_PNG to
"icon" + SUFFIX_SYMBOLIC_PNG.
This avoids the build from erroring out on C4819 (Unicode handling issue in
Visual Studio compiler), notably when running on Chinese, Japanese and
Korean locales.
Also apply -D_USE_MATH_DEFINES, -FImsvc_recommended_pragmas.h and -utf-8 to
the C++ compiler options as well.
We only have implementations of this on X11 and Win32,
so make it available as backend api there.
Update all callers to use either the backend api, or
just monitor 0.
Instead of requiring sassc to be installed add meson subprojects
which build libsass and sassc (currently both forks of mine, tested
under linux/mingw/msvc) when needed.
This allows us to drop the generated .css files and build scripts from git.
See #1502
In gtk_icon_theme_get_for_display() we were calling
gtk_icon_theme_set_display() which eventually (via the css machinery)
called back into gtk_icon_theme_get_for_display() which created a
second icon theme. We avoid this by setting the user-data earlier so
that the css machinery gets back the currently initializing theme
instead.
We look at whether a widget will be mapped (the actual state is not
yet set, so we can't rely on that at css validation time) and use
that to set the i/o priority of the async task.
This means that its likely that widgets that will be displayed soon
are loaded before those that are not yet going to be needed.
This limits the amount of preloading we to, which can for instance
avoid trashing if the icon cache is full, and in general do less work
when its likely to be wasted such as when e.g. background-color for an
icon helper changes.
At the end of GtkImage css validation (during style-updated) when the
css properties (like the icon size) are valid we call _gtk_icon_helper_preload
which does an async icon theme lookup and load. This will happen on a thread
in parallel with the rest of the css machinery, and hopefully by the
time we need the icon it will be ready. If not we will block when we need
it, but during that blocking all the other icons will be loaded.
Testing widget-factory this changes the time of snapshot() from 31 to
25 msec, but on the other hand we also load a few more icons that we
didn't before causing the css validation phase to be about 8 msec slower.
This is because we're preloading all the images in the window, not only
the ones that are visible.
Unfortunately we still load a bunch of icons in snapshot(), from
GtkCssImageIconTheme, and ideally we should try to preload those also.
This happens when we first get the theme for a display, or then the
icon theme setting changes.
This means we don't have to do this scan in the first snapshot
and can do the i/o it in parallel with other stuff. This moves
a 10msec block from the first snapshot cycle to early setup.
If some other thread is lock the icon or icon theme locks they are likely
to do so for a long time, doing i/o. So, switch to trylock() for the
nonblocking part of _async(). This way we can return directly if the
result is available, but do a thread otherwise, never blocking the
calling (main) thread.
Move the lru cache under the global cache lock to avoid some ABBA
style deadlocks when going from icon_theme->icon lock an icon->icon_theme.
We also move all the icon lock uses to a small part of code and make
sure that code never calls out or blocks with any locks held.
Rename the GtkIcon->cache_lock to texture_lock to avoid confusion withe
the global cache_lock.
Removed any mentions of threadsafety from the API docs, we don't
want apps to rely on this, but rather use it outselves internally.
This name can show up in error messages or profiler
traces, so it is nice to provide some hint what
file we are dealing with.
<GtkFileChoser template> is a lot more helpful
than <input>.
This was added in 0b1c9b7cc2 to protect
against reentrancy from the theme-changed signal, but we only emit this
from an idle these days, so thats not necessary anymore, and the recursion
check was causing issues with the async operations where a different
thread loading the theme caused the calling thread to thing the
theme is valid.
This makes GtkIconInfo directly implement paintable by loading
the icon as needed. This is done in a blocking fashion for now, but
could be made more async in the future.
It also means we can't return errors to the called, but I doubt
anyone actually does anything useful with them other than showing
nothing (which we already do).
This also changes a fringe behaviour for unthemed icons. They used to
be never scaled down, but that means we can't tell without i/o the
size of the paintable. Since this is the only case we can't know the
size i took an executive decision and removed that behaviour. I don't
think picking some arbitrary much larger than requested size is ever
right, nor do i think using GtkIconTheme with unthemed icons is overly
useful. If you want to display some random non-iconish image, use
GtkImage instead.
Replace uses of gtk_css_style_get_value with direct access,
throughout the tree. We don't replace all uses, just those
where we are dealing with a fixed property. Be careful to
handle the currentColor special case for color properties.
Introduce refcounted structs for groups of related css properties,
and use them to store the style values. Both GtkCssStaticStyle and
GtkCssAnimatedStyle fill in the structs in GtkCssStyle, and we
can avoid vfuncs for value access, which should be much faster.
We can even start accessing style->core->color directly.
We rely on a specific minimum version of gtk-doc to be able to build the
GTK API reference for the new API. In order to be able to use gtk-doc as
a subproject, though, we need to use a recent version of Meson.
Add GtkWidget API for adding and removing style classes, as well as
checking whether a widget has a style class applied.
Everyone has to go through GtkStyleContext for this these days but with
GtkStyleContext eventually going away, it makse sense for GtkWidget to
have API for this.
Instead of foreaching through all the previous selectors every time we
bloom-filter, just bloom-filter the current element and return a special
value if that filter fails (FALSE). If that happens, don't try
filter-matching more nodes in the caller as we know it's an abort.
We have so many properties that it is basically impossible that all of
them are set and the time spent checking is higher than the time saved
if it does indeed happen.
This was a good idea back in GTK3 when popovers were toplevels, but now
they're regular child widgets, so they should behave that way.
Also, with the introduction of the bloom filter, gtk_css_node_validate()
now assumes it's only called on root nodes, so assert that that is the
case.
Instead of a foreach() function, introduce an iterator, so that the
caller can drive the iteration.
This allows doing stuff inbetween callbacks and avoids closures when
more than one data object should be passed.
As a side effect I even get a small, but noticeable performance
improvement in the 2-10% range depending on benchmark, I guess that's
because there's no function pointer passing going on anymore.
The FileChooser ToolKit (fctk) had its own machinery to handle default
sizes which was completely busted and trying to marshal random numbers
through the widget hierarchy that maybe made sense in 2012 but don't do
now.
Get rid of it, just keep the dialog's GSetting - which funnily enough
used to be written by the dialog but written by the widget.
But that's fctk for you.
Instead of just doing radical change matching on the node itself, also
consider the parent nodes via the bloom filter.
This means a radical change is now also one where the parent
name/id/classes change, but since that's considered a radical change on
the parent already, those things are slow anyway.
Improves the benchmark times for CSS validation during backdrop
transitions in widget-factory from 45ms to 35ms on my machine.
:not() selectors cannot be radical because the bloomfilter only knows if
a value is set in any of the nodes, but cannot determine the opposite
(if a value is not set in at least one node), but that would be required
for:not() selectors.
However, this is very unlikely to happen in the real world, so it's not
worth optimizing.
Unfortunately, change tracking could know this, so by excluding the
:not() selectors from radical changes, the change tracking will now pick
them up. If that turns out to be a performance problem, we need to add a
special category for radical not filters, so change tracking and bloom
filters can deal with them.
The testcase demonstrating the problem in widget-factory has been
extrated and added.
Properly handle diff(1) failing.
In this particular case, the test passed a NULL input file to the diff
(that was fixed, too) and then diff only found one input file and
aborted.
But without this fix, we'd also not catch other abortion reasons for
diff() - as long as it exited in any way, we were happy.
Add a fast path for parent selector matching that uses a bloom filter to
quickly discard selectors that can't possibly match.
Keep in mind that we match using a bloom filter, so we might
accidentally include too many selectors when hash/bucket collisions
occur.
That's not a correctness problem though, because we'll do a real check
afterwards.
The idea for this change is taken from browsers, in particular WebKit.
The reason for this is simply that I want to get hash functions that
have their values close together, so they can fit in a smaller range
(the goal here is 12 bits). By using GQuark, we get consecutive numbers
starting with 1 (and applications have <1000 quarks usually), whereas
interned strings can be all over the place.
As a side effect we also save 64 bytes per declaration.
The function was not selector-specific, so putting it with all the other
utility functions makes more sense.
Also use the utility function in the node declaration printing.
When a device is added, there are two references to it by the device
manager, the initial one and the one used for the id_table. Removing a
device only removed the reference added by the id_table resulting in the
GdkDevice being leaked.
https://gitlab.gnome.org/GNOME/gtk/merge_requests/1358
This is not meant to be a full GtkCalendar conversion to use widgets
instead of custom drawing, but we lost the arrows in the calendar header
when builtin icons were removed. Using proper button for the year/month
buttons brings them back.
According to the ICCCM spec [1], one should subtract the base size from
the window size before checking that the aspect ratio falls in range.
This change fixes shrinking Firefox Picture-in-Picture windows when
running KDE Plasma (with KWin as the window manager).
[1] https://tronche.com/gui/x/icccm/sec-4.html#s-4.1.2.3
Hangul inputs treat pre-edit text as output text and the pre-edit
text won't be moved with mouse click.
Now the reset signal is always emitted simply with mouse click and
each IM engine could handle the signal whether the preedit is committed,
cleared or kept.
Closes#1534
It just gets overridden to do something else, as the 1st GtkWidget’s
class_init() adds it as a binding to toggle tooltips with the keyboard.
The last entity to hook it (& return TRUE) is the only one who gets it.
So, worse: If users needed to manually set accels for a ShortcutsWindow,
coincidentally waited until after the 1st GtkWidget init() to do it, &
copied what GtkApplication said in an attempt to be good & consistent —
they inadvertently broke the keyboard tooltips (except for users with a
GDK_KEY_KP_F1 – whatever that is) as their handler blocked GtkWidget’s.
So, one side has to drop this accelerator, and it seems clear that being
able to open tooltips with the keyboard is more important than having a
second accel for the help-overlay. We can make up a replacement later.
https://gitlab.gnome.org/GNOME/gtk/issues/626
2018-08-24 14:51:21 +03:00
1611 changed files with 109190 additions and 122351 deletions
<span allow_breaks="false">A</span> hyphenation algorithm is a set of rules, especially one codified for implementation in a computer program, that decides at which points a word can be broken over two lines with a hyphen. For example, a hyphenation algorithm might decide that impeachment can be broken as <span allow_breaks="false">impeach‧ment</span> or <span allow_breaks="false">im‧peachment</span> but not <span allow_breaks="false">impe‧achment.</span>
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.