In a nested popover menu, the popover submenus are only closed
when pointing to another item that also has a submenu. If the pointer
is hovering over an item without a submenu close any opened
submenus.
We want to claim the event sequence in the click gesture when appropriate,
such as activating a row or clicking an editable cell, but this is currently
done too early, preventing other gestures for drag-and-drop and rubberband
selection entirely.
Fixes#3649Fixes#3985Fixes#4669
The way we explicitly set the font on the entry
conflicts with the placeholder text styling. But the
entry isn't normally empty, so placeholder text is
not that important here. Remove it and use a tooltip
instead.
When reordering notebook tabs, updating the sensitivity state of the
arrow buttons is necessary if the tab is moved to the beginning or
end of the tab list.
When notebook tabs are reorderable, pressing the notebook arrow buttons to
change the active tab results in tabs reordering unexpectedly.
Claim the event sequence after pressing an arrow button to avoid conflicts
with the motion/drag gesture used for reordering.
A typo resulted in the tab container widget being retrieved instead of
the tab widget. If an adjacent action widget was present, an infinite
loop occurred when switching tabs while a screen reader was enabled.
This function is probably not generally useful for a Gtk+/win32 user,
and it's only used internally by gdk-win32. It's time to deprecate it, I
believe.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Test that we can expand and collapse a row, and then
add another child below it, without crashing.
Adapted from the testcase in #4595.
This tests the fix in the previous commit.
When we collapse a node, we clear out the children,
but we were not disconnecting the signal handler on
the child listmodel, leading to bad outcomes when
that model is persistent and changing.
Fixes: #4595
Right now we only support system DPI awareness in GTK4. In that case
it makes sense to scale text with the DPI of the primary monitor, like
done in GTK3.
We plan to land support for proper fractional scaling in Gdk/Win32, so
in the future the "gtk-xft-dpi" setting will be gathered as intended,
i.e. for text magnification, as an a11y feature.
As I propose to deprecate gdk_win32_surface_get_impl_hwnd() next,
replace it with the alternative.
The main difference between the two functions is that
gdk_win32_surface_get_impl_hwnd() fails gracefully by returning NULL if
the surface is not of the win32 implementation.
All the surfaces should be native surfaces here, and the existing code
doesn't seem to deal with NULL case anyway.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
The function isn't used by Gtk itself anymore, and does not help much.
It creates extra issues for bindings, as it doesn't fit well with code
doing the same job for other objects.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Commit 59f6c50df8 set the memory limit to 100M,
which turns out to exclude some large, valid jpegs.
So, bump things to 300M, matching what was done
in gdk-pixbuf.
We were disabling the insert-emoji action when the
no-emoji input hint is set, but the Ctrl-. shortcut
was bypassing the action and kept working. Make
the shortcut activate the action instead.
Fixes: #5123
When some of the Emoji have been filtered out by
a search term, arrow keynav would behave oddly and
get stuck in invisible sections. Fix this by ignoring
any filtered out children when moving between
sections for arrow keynav.
Fixes: #5076
The function is gone since commit ea65abc7e2 ("Rewrite
GdkWin32Keymap (load table directly from layout DLL)")
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Currently, the wayland IM context sends zwp_text_input_v3.commit from
a number of places, and some of them with partial data. In order to
make client state updates "atomic" and complete, make the communication
happen over an unified notify_im_change() function that happens on
a narrower set of circumstances:
- The GtkIMContext is reset
- The GtkIMContext is just focused
- The gesture to invoke the OSK is triggered
- The IM context is reacting to changes coming from the compositor
Notably, setting the cursor location or the surrounding text do not try
to commit state on their own, and now will be flushed with the corresponding
IM update or reset. But also, these requests won't be prevented from
happening individually on serial mismatch, instead it will be the whole
state commit which is held off.
With these changes in place, all client-side updates are notified
atomically to the compositor under a single .commit request.
Fixes: https://gitlab.gnome.org/GNOME/gtk/-/issues/5106
Fixes: https://gitlab.gnome.org/GNOME/gtk/-/issues/5105
During text widget manipulation (inserting or deleting text via keyboard)
the IM context is reset somewhat early, before the actual change took place.
This makes IM lag behind in terms of surrounding text and cursor position.
Shuffle these IM reset calls so that they happen after the changes, and
ensure that the IM is actually reset, since that is currently toggled on
a pretty narrow set of circumstances.
Also, fix a bug during GtkEventControllerKey::im-update where the condition
on cursor position editability to reset the IM context was inverted.
[196/296] Linking target testsuite/gtk/builder.exe
/usr/lib/gcc/x86_64-w64-mingw32/11.2.1/../../../../x86_64-w64-mingw32/bin/ld: warning: --export-dynamic is not supported for PE+ targets, did you mean --export-all-symbols?
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
During text widget manipulation (inserting or deleting text via keyboard)
the IM context is reset somewhat early, before the actual change took place.
This makes IM lag behind in terms of surrounding text and cursor position.
Shuffle these IM reset calls so that they happen after the changes, and
ensure that the IM is actually reset, since that is currently toggled on
a pretty narrow set of circumstances.
I assume this was committed by mistake. It isn't used, and some
packaging systems will automatically remove it during `clean`.
Signed-off-by: Simon McVittie <smcv@debian.org>
We need to free the queued context list in dispose
if we didn't get to register the contexts, and we also
need to free the list properly when we do get to
register them.
This showed up in valgrind as leaked GList structs.
CI is mostly interested in GTK not introducing compiler warnings, other
submodules like Wayland might have their own and that shouldn't hinder
CI testing of GTK.
Disable -Werror for the wayland submodule, and let it be fixed independently
at some point.
When GTK_EVENT_CONTROLLER_SCROLL_DISCRETE is set, accumulate deltas also
for mouse scroll so a high-resolution mouse wheel click behaves in the
in the same manner as a low-resolution mouse wheel click.
Starting with the Wayland protocol wl_pointer >= 8, discrete axis
events have been deprecated in favour of high-resolution scroll event.
Add a listener for high-resolution scroll events and, for backwards
compatibility, handle discrete events as discrete*120.
Instead of calculating the discrete scroll deltas in
GtkEventControllerScroll, move that code to the event constructor and
access the precalculated values using gdk_scroll_event_get_deltas.
Refactor, no functional changes.
Starting with Linux Kernel v5.0 two new axes are available for
mice that support high-resolution wheel scrolling: REL_WHEEL_HI_RES and
REL_HWHEEL_HI_RES.
Both axes send data in fractions of 120 where each multiple of 120
amounts to one logical scroll event. Fractions of 120 indicate a wheel
movement less than one detent.
The 120 magic number is a copy of the Windows API, so this new
constructor can be used both in Linux >= 5.0 and Windows >= Vista.
gtk_tree_view_top_row_to_dy, which is called from GtkTreeView's
size_allocate function, changes the adjustment value. Since this
conflicts with the animation when changing the active row, bail
out until the animation is finished.
Fixes#4550
When a GtkTreeView scrolled horizontally, it was not possible to
select rows outside the initial area due to an erroneous comparison
between widget and bin window coordinates.
Original change to widget coordinates occurred in commit
a0de570e47
Commit adba0b97 fixed missed pointer crossings by using a helper function that
was already present and looked like did everything that was needed. However
this function was oriented to keyboard focus and it also did update the related
widget state. Doing these changes on pointer-based crossing was misuse, and
could cause weird interactions with keyboard focus management.
Fix this by using gtkmain.c gtk_synthesize_crossing_event() that is in fact
oriented to pointers.
Fixes: adba0b97 (gtkwindow: Synthesize pointer crossing events on state changes)
Closes: https://gitlab.gnome.org/GNOME/gtk/-/issues/5094
Instead of passing an event and figuring out coordinates from it, pass
directly the toplevel coordinates so that we can use this outside event
handling.
All callers have been updated to pass the coordinates, in practical effects
they were already based on the GtkNative.
The inner loop in gtk_paned_set_focus_child() tries to find the
topmost GtkPaned, however, if the `w` variable ends up becoming
NULL after bubbling up the entire GtkWidget hierarchy, this loop
never breaks.
Check for NULL in this loop.
Closes https://gitlab.gnome.org/GNOME/gtk/-/issues/5094
c68247f63b introduced a scroll multiplier,
intended to be significantly lower than the GTK 4.6 behavior but higher
than 1. However, it was _higher_ than 4.6, since 4.6 also had a permanent
1/10 multiplier in GDK, so the cited multiplier values were really 6.4 and
9.7.
We may have situations where velocity is 0/0, but are overshooting. Places where
this happens are mouse wheels, and continuous scroll that ended up still before
finish. In this situation we also want to run the animation for overshoot, so
check for the corresponding axes to also set up the kinetic scroll helper.
Closes: https://gitlab.gnome.org/GNOME/gtk/-/issues/4784
The expected configurability is not going to arrive yet from compositors, and
it is precipitate for GTK to gain any configurability. We do know a factor of 1
feels way too slow, and we do know a factor of page_size * pow (2 / 3) feels way
way too fast.
With the previous multiplier, gtk4-demo at its default size had a vertical textview
factor of 64.332901, and maximized on a 1920x1080 screen a factor of 97.585365.
Pick a magic multiplier that is both significantly below these values and above 1,
and stick to it.
Future work will add the configurability of smooth scroll events where it belongs.
At that point this commit may be reverted so we don't pile up on magic numbers again.
Related: https://gitlab.gnome.org/GNOME/gtk/-/issues/4793
Add missing #define g_memdup2() for gdksurface-broadway.c in case of enabled
broadway-backend as used otherwise.
Copy static would_drop() replacement for g_log_writer_default_would_drop()
from gtk-builder-tool.c to gtk-reftest.c
When widgets go mapped/unmapped, we repick but don't generate crossing
events. Since there could be stateful controllers that use those in
the previously picked widget (e.g. GtkEventControllerMotion), skipping
those breaks their state.
Ensure to send the relevant crossing events on every situation that
changes the pointer focus, so these controllers get a fair opportunity
to undo their state.
Closes: https://gitlab.gnome.org/GNOME/gtk/-/issues/2877
Even though the argument is non-nullable, GTK sometimes incurs in that
by itself by destroying the surface while the event is in flight. This
is the case of popping down a GtkDropdown. When this happens we simply
ignore the crossing event, but we should let it through instead, the
compositor did not send it in vain and we possibly still have pointer
state to undo.
Drop the surface checks, so that the event is propagated along GTK.
Following what was done for pinch/swipe events, give hold gestures their
own distinct sequence as well. Without this it was NULL, which was already
distinct to other touchpad gestures.
This delaying of the cancel event was made to avoid intermediate cancellation
for >=2fg hold gestures followed by pinch/swipe gestures, and it worked as
long as everything was considered to have the same sequence.
Since each pinch/swipe pointer gesture now gets its own sequence, this no
longer applies, nor works. This results in zoom/rotate/swipe gestures being
stuck since the sequence for the touchpad events changes mid-gesture.
Sticking to this pattern of giving touchpad gestures their own sequence,
these hold events cannot be assumed to coalesce with other touchpad gestures,
it is better to let it propagate altogether so that both the hold gesture
and the incoming gesture trigger coherent begin and end/cancel phases.
In the worst case, this results in "::begin, ::cancel, ::begin , ..." before
triggering a touchpad gesture, but the extra begin/cancel ought to be a safe
no-op in widgets.
Closes: https://gitlab.gnome.org/GNOME/gtk/-/issues/5003
The textbuffer test is calling into a function defined by the AT-SPI
accessibility backend. As of commit 4ddf1b70 we only build and run the
test on Linux, but the function in question isn't really
accessibility-related: it's just a serialization function.
Let people know that they will need to use GTK with the Nahimic service
disabled or OpenGL disabled or put their GTK application into the Nahimic
backlist, or try to use GLES, since there is a known issue in the Windows
nVidia graphics drivers and Nahimic that causes GL operations to fail,
causing crashes in operations such as window resizes.
This will close issue #4113--sadly, there is nothing we can do within
GTK to fix the issue.
If gtk_builder_expose_object() is called twice with the same name, it will
result in a g_critical(). This improves that situation by checking for the
object before exposing additional times.
This turns out to be handy in situations where templates are expanded
multiple times, such as application-side implementations of UI merging.
If we get an invalid TARGETS reply, we might not have a valid 'type',
which ends up as NULL and segs in the g_str_equal.
(This is probably fallout from my fix 506566b6a4, which I still
can't reproduce reliably, so the last one just moved the seg a bit
further along, and we still don't know who is sending a bad TARGETS).
This corresponds to:
https://bugzilla.redhat.com/show_bug.cgi?id=2062143
C API users can keep dealing with the implicit equivalence of
GdkFileList and GSList, but language bindings have no idea that one type
is another, and none of them exposes GSList as a type anyway, so they
will need a way to construct a GdkFileList.
Instead of making GdkFileList mutable, and re-implement GSList, we only
provide a constructors pair that lets you create a GdkFileList from a
linked list or from an array.
The gnome-runtime-images have been recently migrated to Quay. This is already reflected in the template.
Please note this MR has been created semi-automatically. If it doesn't make sense, feel free to close it.
Sysprof has a new -Dagent=true build option which allows installing a
/usr/bin/sysprof-agent program (simimlar to sysprof-cli). It provides a
P2P D-Bus API to the process which can control subprocesses. It's used by
IDE tooling to have more control across container boundaries.
However, we do not need it for GTK CI.
Rubberband does not work when initiated past the last row
(warning is printed "Could not start rubberbanding: No item).
Clamp y at the max height of the widgets in the listview
Rubberband does not work when initiated past the last row
(warning is printed "Could not start rubberbanding: No item).
Clamp y at the max height of the widgets in the gridview
Fixes: #3462
The function gtk_grid_view_get_items_in_rect() erroneously calculates
columns less than 0 and greater than n_columns when the user attempts
to rubberband all the way to the left or right respectively. This
causes the rubberband to persistent and creates unexpected behavior.
Limit the rows to a minimum of 0 and maximum of n_columns - 1.
Fixes: https://gitlab.gnome.org/GNOME/gtk/-/issues/3445
DnD under Windows needed 3 fixes to work with Gtk.DropTarget.
1. The droptarget_w32format_contentformat_map list never gets
filled so the gdk_win32_drop_read_async throws
"No compatible transfer format found".
This is an easy fix and done the same way in the win32 clipboard code.
2. After a drop no gdk_drop_emit_leave_event gets emitted.
This causes a second drop to trigger a bunch of assertion
'self->drop == drop' failed because the first drop is still active.
This is also an easy fix and done the same way by the macos backend.
3. Handling gdk_drop_status/gdk_drop_get_actions interaction.
In gtk_drop_target_do_drop the code
```gdk_drop_finish (self->drop, gdk_drop_get_actions (self->drop));```
calls the finish operation with the actions of the drop which triggers
```g_return_if_fail (gdk_drag_action_is_unique (action));```
in gdk_drop_finish. The code assumes that GdkDrop::actions gets
narrowed down by calling gdk_drop_status. This is hard to assure
because at the same time gdk_drop_get_actions is used by
gtk_drop_target_accept to figure out if a drag is accepted.
GdkDrop::actions serves a double purpose here as the supported source
actions and the currently agreed on action. Both the x11 and the
wayland backend get this wrong somewhat too. Under wayland/x11 when
a drag coming from a source that supports both MOVE and COPY is
first hovering a drop target that only supports COPY it is afterwards
no longer accepted by other drop targets only accepting MOVE.
Under x11 this is permanent for this drag but with wayland the drag
recovers when hovering other widgets. The win32 backend now sets the
supported source actions before any enter/move/drop and narrows them
down in gdk_win32_drop_status.
The patch only touches the win32 backend and fixes all three issues,
for me restoring DnD under windows.
Closes#4498
There's a list user_widgets that contains all of the entries and
selections during authentication. This is only freed upon
finalizing the GtkMountOperation. It's possible (and true for the
GVFS SMB implementation) that a MountOperation can have the
gtk_mount_operation_ask_password_do_gtk () function called multiple
times (i.e. bad password). The user_widgets list grows with now
invalid pointers to old widgets (causing unexpected behavior and
seg faults).
Free the user_widgets list upon dialog destruction, we don't need it
anymore.
Fixes: https://gitlab.gnome.org/GNOME/gtk/-/issues/5059
Fixes: https://gitlab.gnome.org/GNOME/gtk/-/issues/5058
It is already explicitly assumed that anonymous authentication will
be used when available, but it is not clear to the user since neither
of the check buttons are selected. Select the Anonymous check button
by default.
When computing a transform value, there is nothing
to do, but we still need to copy the matrix from
src to dest, since it depends on the other transforms
in the array whether we are using the src or the
dest in the end.
This fixes cases like
-gtk-icon-transform: perspective(100px) matrix(1,2,...);
which would otherwise end up with a zero matrix.
This serial should be that from a button press/touch down/etc, use
the last implicit grab here, which will presumably be from the same
device that triggered the event.
Closes: https://gitlab.gnome.org/GNOME/gtk/-/issues/5048
Functions already exist for providing a unique drag action for gdk_drop_finish().
Reuse these functions in the drag_enter/motion callbacks, since they require
a unique action as the return value.
Fixes#3187
The XDND suggested action is a relic from when the source would control
the action for a drop. With the new GtkDropTarget the target decides
the action (not the source). That means the all of the returned
results from the ::enter and ::motion handlers will be unexpectely
ignored. Prefer to use the preferred action over the x11 suggested action.
Fixes: https://gitlab.gnome.org/GNOME/gtk/-/issues/4259
gdk_x11_drop_update_actions() sets actions to
drop_x11->suggested_action when !drop_x11->xdnd_have_actions
and then sets it again to drop_x11->suggested_action if it is.
If xdnd_have_actions is true use xdnd_actions.
For default popover arrow position and default height-for-width layout mode,
natural_width is calculated first with for_size=-1 and orientation=HORIZONTAL,
at the end of gtk_popover_measure() natural_width won't be added with tail_height.
Then to measure with for_size=natural_width and orientation=VERTICAL, obviously
for_size shouldn't be substract with tail_height.
The wrong logic will force content in popover gets less width and then text labels
in popover may get wrapped unnecessarily.
The new content-fit property was wrongly suggesting to manually set
widgets' overflow property, but that property is not really intended to
be set by external code. This commit removes those suggestions and
directly set picture's overflow to be hidden.
It allows to specify the resize mode of the paintable inside the
GtkPicture allocation. This also deprecates the keep-aspect-ratio
property.
Fixes#5027.
We were modifying the removed value before passing
it to the items-changed signal, so we always ended
up with removed == 0 in our signal emission, instead
of passing the original value on, as we should.
Pointed out in !4870
The PangoWeight enum agrees with the numeric values
we use here, so we can do this without a switch and
support numeric weight values at the same time.
Flatpak CI is failing because of unknown option "print-backends".
print-backends was renamed to print in c4d350c260
and subsequently was removed in a4aa6d79ad
(replaced by print-cups and print-cloudprint as auto options)
The width of the left gutter and the height of the top gutter
are now used while computing the child allocations for e.g.
anchors, otherwise - if such a gutter is present - the
widget would be at the wrong position.
Closes#5016
In a list with a visible scrollbar, the scrollbar usually becomes
invisible when the numbers of items is less than the required amount
to scroll. If, however, the list is emptied all at once,
the scrollbar remains. This happens because when there's an empty
list gtk_list_view_size_allocate() returns early before the scrollbar
adjustment is updated.
Given that the list is empty, simply reset the adjustment values
to zero.
Fixes: https://gitlab.gnome.org/GNOME/gtk/-/issues/4370
GtkCheckButton is not derived from GtkToggleButton anymore.
This caused some issues in GtkPrinterOptionWidget which
did not port handling of the button.
Print backends loaded in GtkPrintUnixDialog's load_print_backends()
are not freed later as done in e.g. GtkPageSetupUnixDialog.
This commit destroys and unref those print backends.
Closes#5019
Don't return to the main loop, instead force a run of the paint idle.
The paint idle will know to skip all the phases that aren't requested.
This is critically important becuase gdksurface.c assumes the
FLUSH_EVENTS and RESUME_EVENTS phases are matched, and we cannot
guarantee that if we return to the main loop and let various reentrant
code change the frame clock state.
This would lead to bugs with events being paused and never unpaused
again or even crashes.
Fixes#4941
Something like letter-spacing: -0.5px make a lot of
sense. But we were handling the number as integer
somewhere, loosing the fractional part.
Fixes: #5034
Work harder to find examples for char variation
features, and pull the feature labels out of
the font if possible. This lets us show
meaningful names like "Localised @ and & symbols"
instead of "Stylistic Set 7" or even "ss07".
Add a GtkColumnView scrolling performance test similar to the one used
previously in https://gitlab.gnome.org/GNOME/gtk/-/issues/3334.
The test creates a table with 20 columns and 10,000 rows and scrolls it
to a random position every frame, while measuring the frame times.
There is a commandline flag to pick the cell widget between none (for
benchmarking raw column view scrolling) and various label types. There
is also a commandline switch to disable automatic scrolling in case a
manual assessment is desired. Finally, there's an argument for
controlling the number of columns.
I'm not sure this is API safe, but it is necessary if we want to support
section items and canvas items.
If it's deemed API-unstable, we have to copy this object and deprecate
this one.
This way, we no longer prescribe the use of either GtkListItem or
GtkListItemWidget.
This means we can use it in other places, such as for custom section
header objects or with my Canvas ideas.
With recent updates to GLib, I now see cases where we can hit a state that
has finalized before notify (which will bump the ref count back up). This
is evident in GNOME Text Editor when showing a language submenu from a
popover, and then dismissing the popover and subsequently the tab.
With the previous commit, we at least get a warning like this, which helped
track down the issue.
Gtk-CRITICAL **: gtk_action_observable_unregister_observer: assertion 'GTK_IS_ACTION_OBSERVABLE (observable)' failed
GLib-GObject-CRITICAL **: g_object_ref: assertion '!object_already_finalized' failed
This patch fixes both of those criticals.
Fixes#5009
The menu/action system tends to be incredibly re-entrant, and while fixing
the misuse during finalization cycles should be a priority, this can help
protect just a bit more.
Related #5009
If we take the early return we don't unscale this at the bottom of the
function, causing wrong coordinates in HiDPI screens.
This bug also affects GTK3 (I noticed this running Firefox tests on X).
The GdkToplevelSize struct already has the concept of "bounds", which
means the largest size a window should reasonably have. It's practically
the equivalent of the monitor the window is intended to be mapped on,
with the "struts" (e.g. panels) cut out. It's used by GTK to use this
information to calculate a default window size that is "lagom" (swedish;
not too large, not too small).
This checks mainly that we do the right thing wrt PangoAlignment
weirdness.
0.25 and 0.75 are set to 0.0 and 1.0 currently because of Pango
limitations (and no desire to manually move lines).
But if that were to be fixed, both the ref and the test should update in
the same way and things should just keep working.
Texts usually want the alignment of each row to match the xalign of
the text itself.
Derive the alignment of the PangoLayout from the xalign property of
the inscription. Because Pango doesn't provide float row alignment,
map left, center and right from the xalign in 1 / 3 steps.
We use "label" just like GtkLabel as the two widgets differ in the way
they are measured, but they should be styled the same.
If it turns out we change our opinion on this for specific cases, we
can add style classes later.
Use set_child_visible(FALSE) on those widgets and don't allocate them.
This should usually be the majority of items, so it's quite a worthwhile
addition.
Idea by Ivan Molodetskikh.
Related: #3334
Simplify the API to just return the requirements that the user
has asked for. The rest of the code was undocumented and previously
used as a buggy source for a default value from internal code.
Since the buggy code is now fixed, remove all unnecessary cruft.
There are two reasons for this:
* First, the refactored realize code now makes sure that no
context with unsupported version is ever created.
* Second, this code could bump into false possitives and negatives, since
the user is not requested, nor expected to set_required_version
in any specific order relative to set_allowed_apis. Therefore,
some version could be rejected or accepted based on a set of
allowed apis that the user has not yet correctly configured.
Mimic the behavior of the egl context creation by stablishing
some sane logic for the api and version used. Split the decision
of the type of context (api, legacy) and the creation of a context
of a certain version and all its properties.
By setting and then getting the required version in a context, the code
was not respecting user requirements. Instead, simply get the requested
version by the user clipped by the requirements (display version)
It is useful for backends to get user set preferences while
ensuring the correctness of the result, which will be always
greater or equal than the minimum version provided
GtkGestrureDrag::drag-end can be emitted when the pointer has just
crossed the drag threshold and we have not started the rubberband yet.
This happens if another gesture has claimed the event sequence earlier
in the current event propagation chain.
In such situation, our ::drag-end calls gtk_list_base_drag_update(),
which proceeds to start the rubberband. That's obviously wrong.
Additionally, it also tries to get modifiers from an event it we are
already denied, which obviously fails with criticals:
`gdk_event_get_modifier_state: assertion 'GDK_IS_EVENT (event)' failed`
Thus, if there is no rubberband when we receive ::drag-end, do nothing.
We haven't had any scalable directories in this list.
Add some. Since we seem to have settled on including
just actions and status as subdirectories for each
size, add scalable/actions and scalable/status.
Fixes: #4960
This allows inverting the default text-direction in an application for
debugging, testing, and QA purposes. IDEs such as Builder may automate this
to encourage more application developers to test with a text-direction
different than their own.
If we have a <lookup name="foo" type="SomeInterface"> a runtime warning
would be emitted and the expression would fail to be created. This is
because the interfaces will likely be a GObject as well, meaning we check
the object type branch instead of the interface.
Instead, we need to use the fundamental type like other parts of the
expression system use.
When loading cursors at scale, we expect the
cursor images to have a size of scale * size.
If we don't find such images, load them at their
unscaled size and scale them up ourselves.
Without this, cursors will appear in unexpected
sizes depending on scales and themes.
Related: #4746
On Wayland it is a protocol violation to upload buffers with
dimensions that are not an integer multiple of the buffer scale.
Until recently, Mutter did not enforce this. When it started
doing so, some users started seeing crashes in GTK apps because the
cursor theme ended up with e.g. a 15x16 pixel image at scale of 2.
Add a small sanity check for this case.
Not updating shadow size unconditionally would lead to shadow size not
being set on map, which would lead mutter to think that we are a Window
without extents and then become confused when we suddenly set some.
Make sure that doesn't happen by always having shadows set on map, just
like GTK3.
Fixes#4136
If a context is not realized, calling gtk_at_spi_context_to_ref() will
return a null ref, because its path has not been initialized yet. This
was already done for all other cases in get_parent_context_ref(), but
was missing for the GtkStackPage case.
Fixes: https://gitlab.gnome.org/GNOME/gtk/-/issues/4944
Meson knows all private dependencies itself when passing the library as
first positional argument, no need to specify them manually. Also
simplify backend specific files by simply requiring gtk4, just like
unix-print already did.
This should fix generated gtk4-uninstalled.pc, see Meson bug report:
https://github.com/mesonbuild/meson/issues/10415
It appears that we mess up accounting for blinking
cursors sometimes, and can hit blink_cb when there
is a nonempty selection.
Instead of asserting, warn and stop blinking.
Related: #4767
This brings back a subset of what quit-mnemonic.ui tested for, but
trying a lot harder to trigger the label overdrawing its allocation,
which will cause the text to be cut off when clipping is happening.
It should not be an issue at all with GTK4, but keeping that test around
is a good idea.
Instead of asserting only in debug builds (which are generally not
shipped in distributions) we should deliver a critical log-level message
so that these can be found sooner when not developing with jhbuild,
Flatpak, etc.
Also assert that we've setup the state correctly when realizing the
GskGLRenderer object.
Fixes#4625
I can't quite figure out what this test was meant
to test, and how to make it do so in a way that
does not fall afoul of rendering issues in the GL
renderer and rounding differences in pango.
Can't win with reftests.
There were several mistakes here.
The width of subtextures was set to the width of
the main texture, the data size wasn't properly
calculated, and the preconditions were inverted.
Yay us!
Now that we use event controllers we can forward keybindings from the
external entry to the filechooserwidget at the bubble phase.
Fixes#4905
References:
* commit 1fb075dbca
* commit 686116ba61
This can happen if the group can be resolved even when doing the initial
registration of an action as observer will not yet be in the GSList of
watchers (and therefore has no weak references).
Fixes a warning like the following:
g_object_weak_unref: couldn't find weak ref
These were getting created with possible non-zero values and then inserted
into a hashtable where the readers may not know the state of the group.
Ensure those values are set to zero until we assign them below.
Those property features don't seem to be in use anywhere.
They are redundant since the docs cover the same information
and more. They also created unnecessary translation work.
Closes#4904
Previously, there was an issue with glitching after showing/hiding a
popover that was not also destroyed. This was due to the popover having
an update_freeze_count of zero after hiding the surface.
That resulted in it's toplevel continuously dropping frames such as during
high-frame-rate scrolling in textviews. This problem is much more visible
on high-frame-rate displays such as 120hz/144hz.
With this commit, we freeze the frame clock of the popup until it is
mapped again.
Having the initial layout set to VK_IMAGE_LAYOUT_GENERAL causes issues
when going from the final layout to the initial layout since the image
layout is expected to be the general layout. Setting the initial layout
to undefined doesn't have this restriction.
When a non-existing file is selected in the file chooser
for print-to-file, we weren't updating the button label
to show the new filename. Fix that.
Also, use newer file chooser api.
In GTK 3 we used to move the popovers around using set_relative_to();
this is gone in GTK 4 and the apparent direct replacement is setting
the target widget as the new parent.
But this requires a lot of careful handling least the popover become
orphan, which gets us ready to crash at any moment.
Since we only care about positioning the popovers relative to a row,
let's use the set_pointing_to() instead of reparenting. Now, the
sidebar is always the parent.
This commit adds a new meson option -Dupdate_screenshots=true.
When it is enabled, and -Dgtk_doc=true is also used, then the
build will generate images to include in the API docs from
ui files in docs/reference/gtk/images.
Note: we still keep a copy of the images in git, in order to
allow building without a display connection. To update the
images in git, the generated images need to be copied back
from the builddir to the srcdir.
This is a hot path when scrolling a ColumnView, and
g_param_spec_pool_lookup () was taking a measurable part in this hot
path. Instead, notify using pspecs to avoid the name lookup.
Related: https://gitlab.gnome.org/GNOME/gtk/-/issues/3334
freeze/thaw_notify () showed up on the perf trace for rapid ColumnView
scrolling. Track the three properties manually to make it a little
faster.
Related: https://gitlab.gnome.org/GNOME/gtk/-/issues/3334
This looks like a leftover excess invalidation from when the surrounding
code was refactored to not just be called on parent changes but also
when repositioning inside the same parent in commit
507016cafc
Ivan Molodetskikh found this problem in
https://gitlab.gnome.org/GNOME/gtk/-/issues/3334#note_1445873 which
contains a longer analysis of this problem and the performance
reductions it causes.
Related: #3334
Remove the clipping to the widget area that
GtkWidgetPaintable imposes, so we can see shadows
and other out-of-bounds rendering. This is particularly
useful for toplevel windows with client-side decorations.
This allows consumers greater control over the label without the need
to expose each of the label properties as part of GtkCheckButton interface.
Specifically, motivation for this commit is to be able to wrap the label.
Closes#4698
The fixed-size format we use currently can only handle up
to 32768 bytes of string data. If a compose file contains
more, reject it with a warning.
Fixes: #4873
Even if the FileChooserNative instance drops out on us while we're still
waiting for the portal to answer, we should keep the data and pointers
alive until the sequence of asynchronous operations is running. The code
already tries to do that, by acquiring a strong reference to the
GtkFileChooserNative instance, but it's also freeing data as soon as the
dialog is hidden, while asynchronous callbacks that will look at the
fields on that data are still in flight.
To avoid that, we defer freeing the data until the asynchronous
callbacks are invoked, and we keep a reference on the dialog while we're
emitting signals on it.
Fixes: #4883
The enum values are not compatible, and moreover, there is an extra
GTK_WRAP_NONE that PangoWrapMode doesn't have - thus,
pango_wrap_mode_to_string() will assert.
As far as I can tell, Orca does not read the wrap-mode key in the
dictionary for text attributes, anyway.
Fixes: #4869
if the loop for determining max width grows too big, print an error and
abort assuming that a satisfactory value was reached.
This will cause wrong layout and might cause widgets to overlap, but it
will not infloop.
It actually works around and doesn't really fix the primary cause of the
following bugs, but good enough to close them:
Fixes: #4252Fixes: #4517
If we get consecutive preedit string updates that announce a NULL
string, we still do end up issuing ::preedit-changed with those.
Ignore changes from NULL to NULL, it is the other combinations which
must issue this signal.
It looks like os.add_dll_directory() works in a LIFO order, so we call
os.add_dll_directory() from the end of the list of directories in %PATH%
so that the directories are searched in the correct order.
...when we are using Python 3.8.x or later. Python 3.8.x or later on Windows
require one to call os.add_dll_directory() on every directory that contains
dependent non-system DLLs of a module that are not bundled/installed with the
module.
Since we are very likely running programs that rely on dependent items in
%PATH%, make things easier for people by calling os.add_dll_directory() on
all the valid paths in %PATH% in api.py, so that the test will run
successfully on Windows with Python 3.8.x or later.
adwaita-icon-theme has more appropriate icons for showing/hiding text now.
use those, and in the process fix the fact GtkPasswordEntry has been using
them the other way around.
The root accessible object is registered asynchronously, as it needs to
call a method on the AT-SPI registry daemon. This means we need to defer
registering the GtkAtSpiContext on the accessibility bus and in the
cache until after the registration is complete.
Fixes: #4825
Direct access of the fields of the union trips compiler warnings with
GCC 12, such as:
../gtk/gtkimagedefinition.c:135:13: error: array subscript
‘GtkImageDefinition {aka union _GtkImageDefinition}[0]’ is partly
outside array bounds of ‘GtkImageDefinitionEmpty[1]’ {aka
‘struct _GtkImageDefinitionEmpty[1]’} [-Werror=array-bounds]
When changing folders, we were making the select
button insensitive when there is no folder selected.
However, the select button should be usable to
select the current folder.
Fixes#4020
It is very irritating when the entry completion popup
appears not in response to user input in the entry.
In particular, when that happens right as the dialog
is shown.
To prevent that, temporarily disable completion
when setting the entry text programmatically.
When changing folders, we were making the select
button insensitive when there's no files around.
That doesn't make sense in save mode when we don't
want to select a file but create one.
Fixes: #4851
This allows the user to navigate via tab the links in a label and exits
the widget after the last link, when moving forward, and first link,
when moving backward.
This also ensures that ellipsised links arn't focused.
Fixes: https://gitlab.gnome.org/GNOME/gtk/-/issues/4681
The `has-tooltip` property gets set to `false` for label with links if no
link is selected. This makes sure to only change the property to `true`
but never to `false`.
Instead of populating the properties right away (when the widget might
not have been allocated yet, and hence cannot know the right values),
the widget should queue an allocation, where it will populate the
values.
For reasons that only apply to the old serial handling, asking for
the surrounding after IM changes resulted in lazy handling of
commit() afterwards.
With the recent interpretation of serials, this problem became more
apparent, since it is in fact very likely that the last interaction
step after an IM change is notifying of the changed surrounding
text after the IM change was applied.
Make handling of surrounding text similar to caret position changes,
always commit() after the state change, but skip through non-changes.
This makes the compositor state fully up-to-date after an IM change.
The gesture as connected currently on the child GtkText is easily overridden
by the parent editables (and gently done so in the attempt to consume all
clicks).
Connect this gesture to the parent editable widget in these cases, so the
gesture can cohabit with the click-consuming one. It's not part of the same
group, but it won't be abruptly cancelled.
Fixes: https://gitlab.gnome.org/GNOME/gtk/-/issues/4795
Since GdkTimeCoord stores only axis values, prior to this change,
if a device didn't report GDK_AXIS_X or GDK_AXIS_Y, the history
attached to merged motion events wouldn't contain any positional
information.
Commit 6012276093 already addressed
this issue for devices without tools by storing the event position
in GdkTimeCoord using GDK_AXIS_X and GDK_AXIS_Y and augmenting the
GdkTimeCoord's axis bitmask accordingly.
This change generalizes that workaround to all devices. Note that
if a device DOES report values for GDK_AXIS_X and GDK_AXIS_Y, those
values won't be overwritten.
Closes#4809
We now collect this information during node
construction, so use it here.
The concrete change here is that we now avoid
offscreens for container nodes with multiple children,
as long as they don't overlap. In particular, this
avoid offscreens for ellipsized dim labels.
This fixes two issues with the offscreen rendering code for nodes with
bounds not aligned with the pixel grid:
1.) When drawing to an offscreen buffer the size of the offscreen buffer
was rounded up, but then later when used as texture the vertices
correspond to the original bounds with the unrounded size. This could
then result in the offscreen texture being drawn onscreen at a slightly
smaller size, which then lead to it being visually shifted and blurry.
This is fixed by adjusting the u/v coordinates to ignore the padding
region in the offscreen texture that got added by the size increase from
rounding.
2.) The viewport used when rendering to the offscreen buffer was not
aligned with the pixel grid for nodes at coordinates not aligned with
the pixel grid. Then because the content of the offscreen buffer is not
aligned with the pixel grid and later when used as textures sampling
from it will result in interpolated values for an onscreen pixel. This
could also result in shifting and blurriness, especially for nested
offscreen rendering at different offsets.
This is fixed by adding similar padding at the beginning of the
texture and also adjusting the u/v coordinates to ignore this region.
Fixes: https://gitlab.gnome.org/GNOME/gtk/-/issues/3833
When a window is minimized by user action, the `showAndMakeKey` method is not executed when idle. This prevents the window from being un-minimized immediately.
And allow programmatic minimization of a window by un-minimizing them in `_gdk_macos_toplevel_surface_present`
Closes#4811
macos: prohibit fullscreen transition if in transtion
This prevents performing additional fullscreen transitions while
a transition is already in progress.
Closes#4808
See merge request GNOME/gtk!4612
When given an invalid atom, gdk_x11_get_xatom_name_for_display can
return NULL and trigger a seg in gdk_x11_clipboard_formats_from_atoms.
Check for NULL.
Why I'm seeing a bad atom there is probably a separate question.
https://bugzilla.redhat.com/show_bug.cgi?id=2037786
Currently the GtkIMMultiContext may stick to a delegate GtkIMContext
that no longer applies after the multicontext is dissociated from
any widget.
Handle set_client_widget() so that it can handle changes between
widgets from 2 different display, but also so the delegate is made
NULL whenever the context has a NULL widget.
Doing so, any new client widget results in a new delegate IM context
lookup from the right GdkDisplay and GtkSettings, which avoids any
mix up.
Fixes: https://gitlab.gnome.org/GNOME/gtk/-/issues/4805
The call to gdk_win32_clipboard_request_contentformats() can return NULL even
without an error condition being hit (such as when the system clipboard is
empty), so check whether the returned GdkContentFormat pointer is not NULL
before calling gdk_clipboard_claim_remote(), which expects it to be not NULL,
otherwise we face a warning from that funtion and the subsequent
g_object_unref().
This at least partially fixes issue #4796.
We may well be using an EGL context that does not support Desktop (W)GL on
Windows, such as in the case of using libANGLE. So, check whether WGL is
supported for this running instance before trying to query WGL extensions.
This will get rid of warning messages from libepoxy.
Otherwise a stray scroll controller may prevent others from getting hold
events, even if it always propagates scroll events and does absolutely
nothing.
We only need a C compiler and not the whole toolchain,
and gst-plugins-bad was split into libraries and plugins.
pkg-config -> pkgconf.
This should speed the CI setup up a bit.
As documented:
> Overlay children whose alignments cause them to be positioned
> at an edge get the style classes “.left”, “.right”, “.top”,
> and/or “.bottom” according to their position.
Likely accidental regression in b7ee2cbc28
Fixes https://gitlab.gnome.org/GNOME/nautilus/-/issues/2099
WebKit's GTK 4 port can give us textures with an internal format of
GL_RGBA with GL_UNSIGNED_NORMALIZED and a bit-depth of 8. This fixes
warnings for every GdkGLTexture created/delivered to the GskGLRenderer.
The format is essentially the same as GL_RGBA8 since it is normalized
between 0.0..1.0 for 8-bit components.
Fixes#4783
When surface depth switches from non-high-depth to high-depth (or vice
versa) the current surface has to be destroyed before a new one can be
created for this window. eglDestroySurface however was getting passed a
GdkDisplay, rather than the EGLDisplay it expects. As a result the old
surface did not get destroyed and the new surface could not be created
causing rendering to freeze.
Fixes: https://gitlab.gnome.org/GNOME/gtk/-/issues/4773
If using the opacity CSS property the renderer cannot optimize these
handles without the use of offscreens due to the use of both a border
and rgb render node.
Instead, we can apply the alpha to the color values and get the same
effect in a way that the GL renderer can optimize without the use of
offscreen textures for a sizeable reduction in runtime overhead.
The pixel distance could be small enough between tick() calls that
this kind of checks might potentially become a problem. Rely only on
the calculated velocity to trigger the STOPPED phase, and use a lower
threshold to avoid cutting the animation too early.
Related: https://gitlab.gnome.org/GNOME/gtk/-/issues/4725
In order to properly accumulate scroll velocities, we need to keep
the kinetic scroll helpers after we have possibly stopped them
in the process of initiating a further scroll flick.
So, instead of stopping (and destroying) those helpers on scroll-begin,
keep them until the next scroll-end if a scroll was initiated before
kinetic scroll finished. This way we can fetch the last velocity when
calculating the extra kick.
In order to ensure the helpers don't live beyond what it is expected,
we now also remove them after a finished hold event.
Fixes the accumulation of scrolling velocity on consecutive scroll
sequences.
Do not depend on the kinetic scroll helpers existing or not before
exiting the animation, as we may want to keep those a little bit
longer after stopped.
We may want to fetch the last velocity obtained, even though we
preemptively called stop() on a kinetic scroll helper. Keep this
velocity so it can be queried later on.
On the "scroll" signal, the widget uses
gtk_event_controller_scroll_get_unit() to get the
scroll unit.
When the unit is GDK_SCROLL_UNIT_WHEEL, the
behavior is unchanged: the widget scrolls a
certain number of pixels at each wheel detent
click. This number of pixels is determined by the
window dimensions in get_wheel_detent_scroll_step().
When the delta unit is GDK_SCROLL_UNIT_SURFACE, the
widget directly adds the delta to the number of
scrolled pixels no matter the window dimensions.
Add a new GdkScrollUnit enum that represent the
unit of scroll deltas provided by GdkScrollEvent.
The unit is accessible through
gdk_scroll_event_get_unit().
This moves a lot of the texture atlas control out of the driver and into
the various texture libraries through their base GskGLTextureLibrary class.
Additionally, this gives more control to libraries on allocating which can
be necessary for some tooling such as future Glyphy integration.
As part of this, the 1x1 pixel initialization is moved to the Glyph library
which is the only place where it is actually needed.
The compact vfunc now is responsible for compaction and it allows for us
to iterate the atlas hashtable a single time instead of twice as we were
doing previously.
The init_atlas vfunc is used to do per-library initialization such as
adding a 1x1 pixel in the Glyph cache used for coloring lines.
The allocate vfunc purely allocates but does no upload. This can be useful
for situations where a library wants to reuse the allocator from the
base class but does not want to actually insert a key/value entry. The
glyph library uses this for it's 1x1 pixel.
In the future, we will also likely want to decouple the rectangle packing
implementation from the atlas structure, or at least move it into a union
so that we do not allocate unused memory for alternate allocators.
This removes the sharing of atlases across various texture libraries. Doing
so is necessary so that atlases can have different semantics for how they
allocate within the texture as well as potentially allowing for different
formats of texture data.
For example, in the future we might store non-pixel data in the textures
such as Glyphy or even keep glyphs with color content separate from glyphs
which do not and can use alpha channel only.
This allows the gskglprograms.defs a bit more control over how a shader
will get generated and if it needs to combine sources. Currently, none of
the built-in shaders do that, but upcoming shaders which come from external
libraries will need the ability to inject additional sources in-between
layers.
If the max_entry_size is zero, then assume we can add anything to the
atlas. This allows for situations where we might be uploading an arc list
to the atlas instead of pixel data for GPU font rendering.
We were missing the surface offset (e.g. shadows) at the time of expressing
the text caret location in surface coordinates. Add this offset so the
coordinates are as expected by the compositor.
Fixes: https://gitlab.gnome.org/GNOME/gtk/-/issues/4668
These are meant to always redirect events to the grabbing surface,
even for other surfaces of the same client. We weren't doing that
(instead letting the event go through unmodified), fix this handling
so GTK sees the events consistenty.
If a grab is held on a toplevel surface tree, and events happen on a
different surface tree from another toplevel/window group, we rewrite
these events so they look like generated on the window group that
holds the grab, but it missed that coordinates would fail to be
translated, so these would stay unchanged and "pointing" to random
parts of the toplevel that is holding the grab and handling the events.
Since off-surface coordinates are not specially meaningful, and in
fact impossible to obtain in some backends, just fake the coordinates
making it sure that all rewritten events point outside the surface.
The grabbing window will still handle the events, but the coordinates
in these will be harmlessly moot.
Fixes: https://gitlab.gnome.org/GNOME/gtk/-/issues/4760
The simplify and validate commands can function
without a display connection, only preview absolutely
needs one. Allow this, by using gtk_init_check().
The trickery we do with objcopy and ld to speed up
resource inclusion does not seem to work right on
32bit Arm, so just skip it there.
Fixes: #4757, #4748, #4752
When showing the native file chooser, we need to ensure we clear the
sorted surfaces in the display so that we don't risk delivering events
correctly on the next frame.
We had code to do it and it never actually got used correctly. This ensures
that the popup services are attached to the parents so that they get proper
stacking orders when displayed. Additionally, it fixes popups from being
shown as their own windows in Exposé.
If we are clicking through the shadow of a window, we need to take special
care to not raise the old window on mouseUp. This is normally done by the
display server for us, so we need to use the proper API that is public to
handle this (rather than CGSSetWindowTags()). Doing so requires us to
dispatch the event to the NSView and then cancel the activcation from
the mouseDown: event there.
If we closed a key window in response to events, we need to denote another
window as the new key window. This is easiest to do from an idle so that
we don't clobber notification pairs of "did resign"/"did become" key
window.
We have a sorted set of surfaces by display server stacking, so we can
take the first one we come across that is already mapped and re-show it
to become key/main.
If we have server-side decorations we might need to request a layout in
response to the resize notification. We don't need to do this in other
cases because we already handle that in the process of doing the resize
(and that code is that way because of delayed delivery of NSNotification).
If we are using NSWindow titled windows, we don't end up waking up the
frame clock when the window is resized on the display server. This ensures
that we do that after getting a notification of resize.
Ensure that resolution of the subproject occurs via the dependency
interface, not the "poke at subprojects manually" interface, and make
that actually work via --wrap-mode=forcefallback.
There's no need to mark it as not-required and then manually invoke
subproject(), since fallback should work correctly and it is always
needed.
However, if fallback was performed (or forced) it would error out since
get_variable() was instructed to only use pkg-config while the relevant
variable was exported by the subproject as an internal fallback
dependency.
There are cases we might want to consume a NSEvent without creating a
GdkEvent or passing it along to the NSApplication for processing. This
creates a new value we can use and check against to propagate that without
having to do out parameters at the slightly odd invalid pointer value for
a GdkEvent (similar to how MMAP_FAILED is done).
This can get in the way of how we track changes while events are actively
processing. Instead, we may want to delay this until the next main loop
idle and then check to see if we have a main window as the NSNotification
may have come in right after this.
This seems to be a problem since:
https://gitlab.gnome.org/GNOME/gtk/-/merge_requests/3565
To demo the problem, the video demo in gtk4-demo is currently set to
autoplay, but it doesn't autoplay on load as expected because the
"prepared" notification doesn't fire until the user explicitly presses
play.
Similarly if the demo is tweaked to disable autoplay then on loading a
video (or an audio-only ogg) the duration is not known or shown until
the user presses play.
In LibreOffice we want to know what the size of the video is to position
it before the user can interact with it to set it to play. We can
workaround this to some degree by listening to "invalidate-size" on the
GtkMediaStream object which updates for videos, but that doesn't wor
for audio-only streams.
So restore listening to media-info-updated but ignore -1 (which I see
for audio-only where I get -1 and then a useful value) and 0 of the
original report.
see also:
https://gitlab.gnome.org/GNOME/gtk/-/merge_requests/3550GNOME/gtk!4513
We were looking at GtkWidget:has-focus from
event controller signal handlers here, but
the widget property is only changed after
the event controllers.
Update the :has-focus property of the focus
widget when the active status of the window
changes.
We change the property after generating the
GDK_CROSSING_ACTIVE crossing events.
This one can be used for both premultiplied and non-premultiplied alpha
formats, since alpha is always 255. It is useful for opaque PNG upload
on both cairo and GL renderers.
That way, all permutations are possible. Previously it was only useful
in the cairo renderer, which required rgba8 → premultiplied bgra8, while
the GL renderer required rgba8 → premultiplied rgba8. Now both are
available.
This was only useful when building for AArch32 without -mfpu=neon, on
AArch64 or with -mfpu=neon gcc is smart enough to do the auto-
vectorisation, leading to code almost as good as what I wrote in
1fdf5b7cf8.
It appears that NVIDIA does not implement EGL_EXT_swap_buffers_with_damage
on their EGL implementation, but does implement the KHR variant of it.
This checks for a suitable implementation and stores a pointer to the
compatible implementation within the GdkGLContextPrivate struct.
We want to ensure that we recalculate the sort order of windows before
processing the motion. Generally this would be done in response from the
display server in GdkMacosWindow, but I've seen it possible to race there.
We need to handle the case where we might be racing against an incoming
configure event due to how notifications are queued from the display
server. Rather than calling configure (and possibly causing other things
to move around) this just queries the display server directly for the
coordinates that we care about.
Additionally, we can display:NO as we are in control of all the display
process now using CALayer.
We failed to handle the toplevel with transient-for case here which could
cause our X/Y calculations to be off in other areas such as best monitor
detection.
We do actually need the parent frame clock here because it is the way we
ensure that we get layout called for our popup surfaces at the same time
as the parent surface.
This doesn't appear to happen much, but if it does it is nice to setup
the window placement initially. Generally, transient-for is set after
the creation of the toplevel rather than here.
The GdkMacosBuffer object already has storage for tracking the damage
region as it is used in GdkMacosCairoContext to manually copy regions from
the front buffer to the back buffer. This makes the GdkMacosGLContext also
use that field so that we can easily drop old damage regions when the
buffer is lost. This happens during resizes, monitor changes, etc.
This helper is useful to ensure we are consistent with how we keep a
window clamped to the workarea of a monitor when placing windows on
screen. (This does not affect snap-to-edges).
Currently, we have all the plumbing in place so that GTK consumes the
startup notification ID when focusing a window through the xdg-activation
protocol.
This however misses the case that a window might be requested to be
focused with no startup ID (i.e. via interaction with the application,
not through GApplication or other application launching logic).
In this case, we let the application create a token that will be
consumed by itself. The serial used is that from the last
interaction, so the compositor will still be able to do focus prevention
logic if it applies.
Since we already do have a last serial at hand, prefer xdg-activation
all the way over the now stale gtk-shell focusing support. The timestamp
argument becomes unused, but that is a weak argument to prefer the
private protocol over the standard one. The gtk-shell protocol support
is so far left for interaction with older Mutter.
If _gdk_macos_surface_move_resize() was called with various -1 parameters
we really want to avoid changing anything even if we think we know what
the value might be. Otherwise, we risk messing up in-flight operations that
we have not yet been notified of yet.
This improves the chances we place windows in an appropriate location as
they don't et screwed up before window-manager placement.
We need to bring the application to the foreground in multiple ways, and
this call to [NSApp activateIgnoringOtherApps:YES] ensures that we become
foreground before the first window is opened. Otherwise we end up starting
applications in the background.
Fixes#4736
If we are double buffering surfaces with IOSurface then we need to copy
the area that was damaged in the previous frame to the back buffer. This
can be done with IOSurface but we need to hold the read-only lock so that
we don't cause the underlying IOSurface contents to be invalidated.
Additionally, since this is only used in the context of rendering to a
GdkMacosSurface, we know the life-time of the cairo_surface_t and can
simply lock/unlock the IOSurface buffer from begin_frame/end_frame to have
the buffer flushing semantics we want.
To ensure that we don't over damage, we store the damage in begin_frame
(and copy it) and then subtract it from the next frames damage to determine
the smallest amount we need to copy (taking scale factor into account).
We don't care to modify the damage region to swapBuffers because they
already have the right contents and could potentially fall into another
tile anyway and we'd like to avoid damaging that.
Fixes#4735
This can be used to lock a surface for reading to avoid causing the
surface contents to be invalidated. This is needed when reading back from
a front-buffer to the back-buffer as is needed when using Cairo surfaces
to implement something similar to BufferAge.
Previously, a single CVDisplayLink was used to drive updates for all
surfaces across all monitors. It used a 'best guess' rate which would
allow for updates across monitors of mixed rates. This is undesirable for
situations where you might have a 144hz monitor as it does not allow for
reaching up to that frame rate.
Instead, we want to use a per-monitor CVDisplayLink which will fire at the
rate of the monitor down to the level of updates we require. This commit
does just that.
When a surface crosses onto a new monitor, that monitor is used to drive
the GdkFrameClock.
Fixes#4732
Using the mode allows better detection of refresh rate and refresh
interval for the CVDisplayLink bridge to GdkFrameClock. Using it can help
ensure that our 144hz displays can actually reach that rather than falling
back to just 60hz.
This will also need future commits to rework the displaylink source to be
per-monitor.
When the fingers are placed on the touchpad, we get a scroll event with
the phase NSEventPhaseMayBegin. We can use this to synthesize an is_stop
event. This results in the scrolledwindow stopping scroll with stop
gestures.
This can cause another warning as well, however, which should be addressed
from #4730.
Fixes#4733
Windows can end up on different monitors despite having a parent or
transient-for ancestor. We want them to be driven by the CVDisplayLink
for the best-monitor, and so this needs to be unshared.
Currently we're using a display link that is for all active displays which
is just the display server trying to find some timings that try to overlap
as many as possible.
That was fine for a prototype, but we really need to do better for
situations with mixed frame rate (such as 60hz and 120hz promotion
displays). Additionally, the 144hz external monitor I have will never
reach 144hz using the current design.
This is just the first step in changing this, but the goal is to have
one of these attached to each GdkMacosMonitor which we can then use to
thaw surfaces specific to that monitor.
We will eventually be needing additional feedback from the display server
which would be nice to keep away from the rest of GdkMacosDisplay for
cleanliness sake. Particularly for feedback from mission control and other
environment factors that requires private API for proper integration.
This may come from different sources at around the same time, e.g.
a hold gesture while on overshoot. Avoid doing that if an
animation is already set.
Fixes: https://gitlab.gnome.org/GNOME/gtk/-/issues/4730
Instead of performing keyboard layout substitution whenever we find a matching
entry in the registry, first try to load the original layout and only attempt
substitution when that fails.
See #4724
When large viewports are passed to gsk_renderer_render_texture(), don't
fail (or even return NULL).
Instead, draw multiple tiles and assemble them into a memory texture.
Tests added to the testsuite for this.
CI currently fails with "fatal error LNK1318: Unexpected PDB error; OK (0) ''"
Google tells me it might be related to hitting a memory limit. Let's try
disabling debug for now.
There may be various reasons that an application could need access to the
underlying NSWindow that is being used to display the GdkMacosSurface
contents. This provides a minimal API to do that without exposing our
implementation details through public API.
As our rendering system is likely to change over time, we very much want
to keep GdkMacosView, GdkMacosLayer, GdkMacosTile, and GdkMacosWindow all
private implementation details which are subject to change.
As this is public API, we are a bit long-winded with the name so it is
clear what is being accessed without polluting symbol names with things
like "ns" as we used to.
When using server-side-decorations, we need to avoid potential cycles with
compute-size as it may not have the new sizing information yet. We can
just short circuit during "live resize" to get that effect.
Fixes poor window resizing from top-left on titled windows.
This doesn't give us appropriate results if we use the window delegate.
Instead, we need to adjust the frame at the same time we change the
style mask so that we end up in the same location.
Previously we had issues on macos where the overshoot would keep showing.
To fix this we need to actually use discrete events instead of the
generated deltas from macOS in the scroll wheel case. Additionally, we need
to drop the kinetic momentum events from macOS and rely on the gtk kinetic
events which are already happening anyway. We also need to submit the
is_stop event for the GDK_SCROLL_SMOOTH case when we detect it.
To keep the discrete scroll events correct, we need to alter the hack in
gtkscrolledwindow.c to use the same path as other platforms except for
when a smooth scroll event is in place. In the future, I would imagine that
this falls into the boundary of high-precision scrolling and would share
the same code paths as other platforms.
With all of these in place, kinetic scrolling with overshoot appears the
same on macOS as other platforms.
When creating new windows, it is better if we create them with a slight
offset to where they were created before so that they are visible to the
user separately from what they might be overshadowing.
This broke with the previous fixes for initial window positioning. We need
the initial positioning so that tails will be displayed correctly when the
popover surface is displayed.
If the size changes, we need to relayout the tiles. Otherwise we can keep
using what we had before. Generally, that shouldn't happen, but the
previous check was failing in a number of ways.
It looks like, particularly on the M1, we might need to double buffer the
contents of the IOSurface<->OpenGL texture bindings. This doesn't appear
to show up on the Intel macbooks I've tried, but I've seen it in the wild
on an M1.
If we have a 2x scale laptop with a 1x scale external display, we would
need to create a new IOSurface for the external display once it crosses
a boundary, otherwise we won't have something capable of displaying
correctly on the second monitor.
This provides a major shift in how we draw both when accelerated OpenGL
as well as software rendering with Cairo. In short, it uses tiles of Core
Animation's CALayer to display contents from an OpenGL or Cairo rendering
so that the window can provide partial damage updates. Partial damage is
not generally available when using OpenGL as the whole buffer is flipped
even if you only submitted a small change using a scissor rect.
Thankfully, this speeds up Cairo rendering a bit too by using IOSurface to
upload contents to the display server. We use the tiling system we do for
OpenGL which reduces overall complexity and differences between them.
A New Buffer
============
GdkMacosBuffer is a wrapper around an IOSurfaceRef. The term buffer was
used because 1) surface is already used and 2) it loosely maps to a
front/back buffer semantic.
However, it appears that IOSurfaceRef contents are being retained in
some fashion (likely in the compositor result) so we can update the same
IOSurfaceRef without flipping as long as we're fast. This appears to be
what Chromium does as well, but Firefox uses two IOSurfaceRef and flips
between them. We would like to avoid two surfaces because it doubles the
GPU VRAM requirements of the application.
Changes to Windows
==================
Previously, the NSWindow would dynamically change between different
types of NSView based on the renderer being used. This is no longer
necessary as we just have a single NSView type, GdkMacosView, which
inherits from GdkMacosBaseView just to keep the tedius stuff separate
from the machinery of GdkMacosView. We can merge those someday if we
are okay with that.
Changes to Views
================
GdkMacosCairoView, GdkMacosCairoSubView, GdkMacosGLView have all been
removed and replaced with GdkMacosView. This new view has a single
CALayer (GdkMacosLayer) attached to it which itself has sublayers.
The contents of the CALayer is populated with an IOSurfaceRef which
we allocated with the GdkMacosSurface. The surface is replaced when
the NSWindow resizes.
Changes to Layers
=================
We now have a dedicated GdkMacosLayer which contains sublayers of
GdkMacosTile. The tile has a maximum size of 128x128 pixels in device
units.
The GdkMacosTile is partitioned by splitting both the transparent
region (window bounds minus opaque area) and then by splitting the
opaque area.
A tile has either translucent contents (and therefore is not opaque) or
has opaque contents (and therefore is opaque). An opaque tile never
contains transparent contents. As such, the opaque tiles contain a black
background so that Core Animation will consider the tile's bounds as
opaque. This can be verified with "Quartz Debug -> Show opaque regions".
Changes to Cairo
================
GTK 4 cannot currently use cairo-quartz because of how CSS borders are
rendered. It simply causes errors in the cairo_quartz_surface_t backend.
Since we are restricted to using cairo_image_surface_t (which happens to
be faster anyway) we can use the IOSurfaceBaseAddress() to obtain a
mapping of the IOSurfaceRef in user-space. It always uses BGRA 32-bit
with alpha channel even if we will discard the alpha channel as that is
necessary to hit the fast paths in other parts of the platform. Note
that while Cairo says CAIRO_FORMAT_ARGB32, it is really 32-bit BGRA on
little-endian as we expect.
OpenGL will render flipped (Quartz Native Co-ordinates) while Cairo
renders with 0,O in the top-left. We could use cairo_translate() and
cairo_scale() to reverse this, but it looks like some cairo things may
not look quite as right if we do so. To reduce the chances of one-off
bugs this continues to draw as Cairo would normally, but instead uses
an CGAffineTransform in the tiles and some CGRect translation when
swapping buffers to get the same effect.
Changes to OpenGL
=================
To simplify things, removal of all NSOpenGL* related components have
been removed and we strictly use the Core GL (CGL*) API. This probably
should have been done long ago anyay.
Most examples found in the browsers to use IOSurfaceRef with OpenGL are
using Legacy GL and there is still work underway to make this fit in
with the rest of how the GSK GL renderer works.
Since IOSurfaceRef bound to a texture/framebuffer will not have a
default framebuffer ID of 0, we needed to add a default framebuffer id
to the GdkGLContext. GskGLRenderer can use this to setup the command
queue in such a way that our IOSurface destination has been
glBindFramebuffer() as if it were the default drawable.
This stuff is pretty slight-of-hand, so where things are and what needs
flushing when and where has been a bit of an experiment to see what
actually works to get synchronization across subsystems.
Efficient Damages
=================
After we draw with Cairo, we unlock the IOSurfaceRef and the contents
are uploaded to the GPU. To make the contents visible to the app,
we must clear the tiles contents with `layer.contents=nil;` and then
re-apply the IOSurfaceRef. Since the buffer has likely not changed, we
only do this if the tile overlaps the damage region.
This gives the effect of having more tightly controlled damage regions
even though updating the layer would damage be the whole window (as it
is with OpenGL/Metal today with the exception of scissor-rect).
This too can be verified usign "Quartz Debug -> Flash screen udpates".
Frame Synchronized Resize
=========================
In GTK 4, we have the ability to perform sizing changes from compute-size
during the layout phase. Since the macOS backend already tracks window
resizes manually, we can avoid doing the setFrame: immediately and instead
do it within the frame clock's layout phase.
Doing so gives us vastly better resize experience as we're more likely to
get the size-change and updated-contents in the same frame on screen. It
makes things feel "connected" in a way they weren't before.
Some additional effort to tweak gravity during the process is also
necessary but we were already doing that in the GTK 4 backend.
Backporting
===========
The design here has made an attempt to make it possible to backport by
keeping GdkMacosBuffer, GdkMacosLayer, and GdkMacosTile fairly
independent. There may be an opportunity to integrate this into GTK 3's
quartz backend with a fair bit of work. Doing so could improve the
situation for applications which are damage-rich such as The GIMP.
There are situations where our "default framebuffer" is not actually
zero, yet we still want to apply a scissor rect.
Generally, 0 is the default framebuffer. But on platforms where we need
to bind a platform-specific feature to a GL_FRAMEBUFFER, we might have a
default that is not 0. For example, on macOS we bind an IOSurfaceRef to
a GL_TEXTURE_RECTANGLE which then is assigned as the backing store for a
framebuffer. This is different than using gsk_gl_renderer_render_texture()
in that we don't want to incur an extra copy to the destination surface
nor do we even have a way to pass a texture_id into render_texture().
The GtkFileCHooserNativeQuartz injects a NSComboBox into the NSSavePanel
(which is displayed in a remote process since 10.15 whether or not you are
a sandboxed application). The style has changed and we need more space
here to not clip part of the combobox out of view.
I tried every size from 22 to 30 and this seemed to look the most natural
without skewing the location of the text within the combobox.
Previously, the popover would cause the window to go into the :backdrop
state which is not what we want for consistency with other platforms. This
fixes that by walking up the surface chain when we get notified of
loosing or acquiring "key" input from the display server.
If the rendering operation is over an opaque region, we can potentially
avoid clearing a large section of the framebuffer destination. Some cases
you do want to clear, such as when clearing the whole contents as some
drivers have fast paths for that to avoid bringing data back into the
framebuffer.
One may be using IJG libjpeg or libjpeg-turbo to build GTK, and their
build files may or may not generate pkg-config files for us. To make
things easier, we can make use of CMake's built-in support for finding
IJG libjpeg or libjpeg-turbo.
The CMake build files for libtiff may or may not generate pkg-config
files for us, so we can use Meson's CMake support to help us find
libtiff, as CMake has built-in support for finding libtiff.
Add a variable in meson.build that covers Visual Studio-like compilers,
so that we can use it to help us find depedencies using CMake rather
than via pkg-config, where applicable.
Change the existing use case for finding libpng accordingly.
We might have panels with controls in them where the window is running in
another process. The control could have a wrapper window which we would
see from this process. This can happen with the GtkFileChooserNative, but
any NSSavePanel in macOS 10.15+ is out of process (not just sandboxed
applications).
This significantly cleans up how we handle various move-resize, compute-
size, and configure (notification of changes) in the macOS GDK backend.
Originally when prototyping this backend, there were some bits that came
over from the quartz backend and some bits which did not. It got confusing
and so this makes an attempt to knock down all that technical debt.
It is much simpler now in that the GdkMacosSurface makes requests of the
GdkMacosWindow, and the GdkMacosWindow notifies the GdkMacosSurface of
changes that happen.
User resizes are delayed until the next compute-size so that we are much
closer to the layout phase, reducing chances for in-between frames.
This also improves the situation of leaving maximized state so that a
grab and drag feels like you'd expect on other platforms.
I removed the opacity hack we had in before, because that is all coming
out anyway and it's a bit obnoxious to maintain through the async flows
here.
This fixes GTK's NSWindow for toplevels so that they are allowed to enter
fullscreen. We were already handlign the state transitions from the
setStyleMask: halper, but we didn't previously tell the window we are
allowed to transition into that.
There is a bit of a mismatch here in that GTK doesn't have any such flag
that determines if a window is "allowed" by policy to enter fullscreen
since window managers on Linux are free to do that at will.
This makes it easier to figure out those values (which are mentioned in
the GtkApplication documentation) rather than working that out from the
way they're generated (or documented as being generated).
If we have GStreamer on macOS we likely have support for CGL to get an
OpenGL context we can use. This provides the missing pieces to get
accelerated video playback in gtk4-widget-factory working.
This more than halves the total runtime of this function since the
previous commit, from 8.36% to 4.02%, and is most likely memory
bandwidth limited on this specific board now.
I tried to do a SSE2 version as well, but couldn’t find any equivalent
of the LD4/ST4 ARM instruction.
On x86 on a Kaby Lake CPU, this makes it go from 6.63% of the total
execution time (loading some PNGs using the cairo backend) down to
3.20%.
On ARM on a Cortex-A7, on the same workload, this makes it go from 57%
to 8.36%.
We want our tracking area to be limited to the input region so that we
don't pass along events outside of them for the window. This improves the
chances we click-out of a popover with a large shadow.
This still doesn't let us pass-through clicks for large shadows on top-
level windows though.
We only should be asserting in static functions. Furthermore, this function
did not need to have GDK_BEGIN_MACOS_ALLOC_POOL as nothing is being
allocated there which would cause pooling to get used.
This needs to handle the boundary case where the value is exactly equal
to the edge of a rectangle (which gdk_rectangle_contains_point() does not
consider to be containing). However, if there is a monitor in the list
that is a better match, we still want to prefer it.
When using an external mouse on MacOS, the scrolling behavior is
reversed from the user's scrolling preference. Additionally, it is
noticeably sluggish.
This commit fixes both issues by negating the deltas and multiplying
them by 32 before constructing a new scroll event. 32 seems to be the
"traditional" scaling factor according to [Druid], but I'm not sure
where that value actually comes from. Regardless, scaling the deltas by
this amount makes scrolling feel a lot more responsive in the GTK demos.
Scrolling with a trackpad is not affected by either issue because it
triggers a different code path that uses more precise deltas, and
already negates them.
[Druid]: https://linebender.gitbook.io/linebender-graphics-wiki/mouse-wheel#external-mouse-wheel-vs-trackpad
We currently list everything as a dependencies, regardless of whether
it actually is; this is a source of confusion for users that read the
GTK documentation.
Gi-docgen has a new "related" key in the project configuration which
allows us to list libraries that are merely related to the namespace
we are documenting; the "dependencies" key is used to document the
actual namespace dependencies, now.
This was causing us to draw the same background content twice which is a
significant amount of bits to flip in the GPU for maximized windows,
especially twice.
This updates GtkPopover to use the new GtkNative abstraction for
reporting opaque regions of the window, in hopes that it can speed
up compositors for things like animated lists, menu transitions,
and more.
Fixes#4689
This switches to using the new GtkNative machinery for updating the
opaque region. Some amount of local calculation is still required for
determining when we should apply shadows, and this inherits what was
done previous for that.
Related #4689
This abstracts the machinery to update the opaque region for a GtkWindow
into GtkNative so it may be used from other native impelementations such
as GtkPopover.
Related #4689
Some Windows keymaps have bogus mappings for the Ctrl modifier. !4423 attempted
to fix this by ignoring the Ctrl layer, but that was not enough. We also need to
ignore combinations of Ctrl with other modifiers, i.e. Ctrl + Shift. For example,
Ctrl + Shift + 6 is mapped to the character 0x1E on a US keyboard (but it should
be treated as Ctrl + ^). Basically, always ignore Ctrl unless it is used in
conjunction with Alt, i.e. as part of AltGr.
Related issue: #4667
If any of the APIs that assumes that the entry is set already is used
before having one already set, things break pretty badly.
Fixes a downstream issue reported at https://github.com/gtk-rs/gtk4-rs/issues/873
`free` is defined in `stdlib.h`, see for example
<https://pubs.opengroup.org/onlinepubs/009604499/functions/free.html>. Without
this include compilation can fail with the following error:
```
../gdk/loaders/gdkjpeg.c: In function ‘gdk_save_jpeg’:
../gdk/loaders/gdkjpeg.c:264:7: warning: implicit declaration of function ‘free’ [-Wimplicit-function-declaration]
free (data);
^
../gdk/loaders/gdkjpeg.c:264:7: warning: incompatible implicit declaration of built-in function ‘free’
../gdk/loaders/gdkjpeg.c:264:7: note: include ‘<stdlib.h>’ or provide a declaration of ‘free’
../gdk/loaders/gdkjpeg.c:302:67: error: ‘free’ undeclared (first use in this function)
return g_bytes_new_with_free_func (data, size, (GDestroyNotify) free, NULL);
^
../gdk/loaders/gdkjpeg.c:302:67: note: each undeclared identifier is reported only once for each function it appears in
../gdk/loaders/gdkjpeg.c:303:1: warning: control reaches end of non-void function [-Wreturn-type]
}
^
```
We don't want to risk having something really weird come out if we have a
WCG colorspace, so instead only do the performance hack on systems where
the output is likely reasonable.
We will want to eventually just be drawing in the appropriate colorspace,
but that is not available yet.
When using software rendering w/ cairo, assume we're drawing in
the best-monitor's colorspace rather than RGB to avoid colorspace
conversions on every frame.
Instead of relying on cairo_t to perform drawing from our backing
image surface to the Core Graphics context, we can convert the
cairo_image_surface_t into a CGImageRef without having to copy
data if we are certain of the alignment of the image up front.
Without this, there are many situations, based on the size of the
window that could cause cairo to take a slow path and malloc/copy
the data to ensure that alignment.
The previous commit titled "macos: align image surface rowstride to
16-bytes" ensures that this invariant is true so that our drawing
code can assume we can reference the framebuffer from the
cairo_image_surface_t using a CGDataProvider.
Since GdkMacosCairoContext and GdkMacosCairoSubview are coordinating,
we can also setup the transformation/scale early when drawing the
cairo_image_surface_t instead of when copying it to Core Graphics.
Furthermore, the CGImageRef is created with an RGB colorspace so
that we are not performing colorspace conversion to the output
device. We don't get color matching between displays, but we don't
expect that anyway, particularly with the software renderer.
When creating a cairo_image_surface_t we want both the framebuffer pointer
and each row to be aligned to 16-bytes so that Core Graphics will use more
optimal paths.
However, cairo_image_surface_create() will not guarantee that the rowstride
is aligned to 16-bytes so we must do that ourselves.
We need to avoid conflating the managing of frame callbacks from
the freeze/thaw mechanics and ensure we don't perform extra thaw
requests at the wrong time.
Some keymaps on Windows contain bogus mappings for Ctrl+key for certain
keys, e.g. Ctrl+Backspace = Delete, or Ctrl+[ = 0x1B. These are never
used on Windows, so we should ignore them.
Fixes#4667
GTK's old key symbol list is missing a few symbols like the per mille
sign that is included in some keyboard layouts. This commit updates
gdkkeyuni.c to match libxkbcommon's current key symbol list.
From the GCC manpage:
> Wimplicit-fallthrough=5 doesn't recognize any comments as
> fallthrough comments, only attributes disable
> the warning.
So, check for the =5 version after checking for the simple version. This
way we get -Wfallhrough with clang and -Wfallthrough -Wfallthrough=5
with GCC, which works.
Hold gestures are used to bring existing gestures on touchpad
semantically closer to touchscreen gestures.
Touchpad gestures observe hold gestures with a matching amount of
fingers and emit their begin and end signals when fingers are detected
or removed on/from the touchpad.
When a hold cancel event is detected, it is required to wait a few
milliseconds until the next event(s) are received to avoid emitting
multiple begin signals.
Part-of: <!3454>
Handle hold events:
- GDK_TOUCHPAD_GESTURE_PHASE_BEGIN: scroll-begin is emitted.
- GDK_TOUCHPAD_GESTURE_PHASE_END: A hold gesture ends only when all
fingers are lifted from the touchpad without movement, so
scroll-end is emitted right away.
- GDK_TOUCHPAD_GESTURE_PHASE_CANCEL: A hold gesture is cancelled when
some fingers are lifted/put down or movement is detected. In this
case, scroll-end is emitted after a small timeout only if
GDK_SCROLL wasn't detected.
Part-of: <!3454>
Since the addition of GdkEventSequence in touchpad events, these
are now stored in the gesture using that sequence. This bit of touchpad
gesture handling was however missing to be updated, still looking up
the special NULL sequence.
Use the last sequence here, which will be the one coming from touchpad
gesture events.
Despite touchpad gestures having a sequence, these must use the logical
pointer focus. Avoid using the sequence for GtkPointerFocus lookups with
those events, in order to ensure those events make it all the way to the
intended target.
This is fallout from adding GdkEventSequence information to touchpad
gestures.
This change is done for 2 reasons:
- The logic to request this phase when compressing scroll events is
slightly broken. If there are multiple scroll events that are
coalesced into one, the surface frame clock will not get this request.
The worst case is having >= 2 scroll events on every frame, as the
compressed event will be left in the queue, and be further compressed
on future events.
- Even scroll events aside, this phase is requested in oddly specific
places that are not enough to cover all events, others do rely on
unrelated GdkFrameClock activity that happens to flush the events
as well.
Unify this phase request so it explicitly happens on the arrival of any
event. This ensures that events (compressed or not) will be handled
promptly after arrival.
Currently when the widget is realized after the focus in event the input
method isn't activated as enable is never sent. The call trace is
gtk_text_focus_changed ->
gtk_im_context_focus_in ->
gtk_im_context_wayland_focus_in
which returns early as self->widget is NULL since it's set up in
gtk_text_realize() via gtk_im_context_set_client_widget(). Handle that
case by invoking gtk_im_context_focus_in() from gtk_text_realize() too.
A case where the above happens is a GtkSearchEntry in a GtkSearchBar.
E.g. in gtk4-demo when starting the demo and then hitting the search
button right away.
Remember the current context on focus-in even though the text-input
isn't set up yet. This helps in the case where the text-input is not yet
created but a widget already got focused. Without that the enable()
invocation in text_input_enter() woulnd't be invoked leaving the input
method disabled.
This fixes
gtk4-demo --run=search_entry
which would initially not show the on-screen keyboard when e.g using
phoc/sway as compositor.
Tools like gtk4-launch can't set surface on the activation token so
don't require it. If the compositor requires it we can't do anything
about it anyway. This avoids a critical:
(gtk4-launch:23497): Gdk-CRITICAL **: 17:07:24.704: gdk_wayland_surface_get_wl_surface: assertion 'GDK_IS_WAYLAND_SURFACE (surface)' failed
Fixes: be4216e051 ("gdk/wayland: Support the xdg-activation wayland protocol")
Signed-off-by: Guido Günther <agx@sigxcpu.org>
As per Benjamin's suggestions, cleanup the previous implementation on
initializing the GLES context on Windows, so that we use more items that are
already in GDK proper and integrate two functions into one.
Instead of first trying to explicitly ask for a WGL 4.1 context, ask for
the WGL context version that matches what is reported via
epoxy_gl_version(), so that we get the maximum WGL version that is
supported by the graphics drivers, and make sure any WGL contexts that
are shared with this (initial) WGL context are created likewise.
We can try to do a default-bog-standard 3.2 core WGL context creation
if the need arises, but let's leave that alone for now.
The EGL context that we are actually creating must have matching OpenGL/ES
versions and allowed GL API set with the previously-created EGL context
that will be shared with it so that they can interoperate together, if
applicable.
This will fix the situation by making sure that we request for the
OpenGL/ES version and OpenGL API set that match with what we have in our shared
EGL context. Otherwise, the newly-created EGL context assumed a OpenGL/ES 2.0
context that supported desktop OpenGL, which may not be what we wanted, such as
in the case of libANGLE.
We are now able to create EGL contexts properly on Windows, but not GLES. This
tries to fix things by doing the following:
* Record the GL context type in a more proper fashion, using an Enum. This
makes things a bit cleaner.
* Force GLES-3.0+ contexts, since libANGLE requires this to properly work with
the shaders-its 2.0 contexts don't work well with our shaders.
Since now we have the shaders working on Windows under GLES with libANGLE using
a 3.0+ context, drop the check to fall back to the Cairo renderer when GLES is
being used.
We only save the size when we transition from floating to fixed, so that
we can restore the size to the one prior to being fixed.
However, we should not restore to this size whenever we see a 0x0 size
from xdg_toplevel, as it can do that any time it doesn't care about the
size, e.g. when the surface is floating and just changing state.
Fix this by only using the saved size when transitioning from fixed to
floating, not when staying floating while previously floating.
Closes: https://gitlab.gnome.org/GNOME/gtk/-/issues/4634
Calling functions inside a g_assert() means those functions will be
compiled out when building with G_DISABLE_ASSERT.
This fixes the release job in the CI pipeline.
Make GtkIMContextIME ignore ASCII control characters just like other
IMContext implementations (e.G. GtkIMContextSimple). Fixes bogus
characters appearing in text input fields (old bug 676077).
The actual code that does the IM context code handling on Windows now uses the
native Windows APIs to handle keystrokes, so this patch is no longer needed, as
it was found that it instead caused issues.
Pointed out in issue #2865.
This reverts commit fd6ce9975e.
gdk_wayland_toplevel_inhibit_idle() contained a contradictory assert
that always fail. More specifically, in the branch that is supposed to
create the idle inhibitor, there is an assertion that it must already
exist and that the refcount must be greater than zero. This causes a
crash on WMs/DEs that use the ZWP idle inhibit manager protocol such as
KDE Plasma and Sway. Fix this by just asserting that the refcount is
zero instead.
GtkBuilder uses GMarkup, which defines a boolean attribute value as:
- yes/no
- true/false
- 1/0
The ITS file for GtkBuilder UI definitions is only using the first pair,
likely because Glade only ever used those values. GTK's own tools, though,
will typically simplify the full yes/no and true/false strings to 1 and 0,
to minimise the parsing time.
Fixes: #4596
Various transforms are normalized with their next transform, and if they
end up being the identity transform will return NULL.
For example a translation by (x,y,z) and followed by (-x,-y,-z) will
result in NULL.
This makes the hotspot of DND surfaces work when using the Vulkan and
OpenGL renderers.
This bumps the CI image used to the newly built image. This is needed to
install a new enough libwayland-client.so needed for wl_surface.offset.
This is done by adding wayland as a meson subproject, building it
on-demand if the version in the system is not new enough. As
libwayland-client.so is pulled in implicitly when linking to gtk4, the
compile step needs LD_LIBRARY_PATH set to make ld find the right library
to link to.
For some users, GetKeyboardLayoutNameA() returns an alias instead of the
fully resolved keyboard layout identifier. In that case, we have to
query the registry to resolve the alias before we can look up the DLL
path.
See comments under https://gitlab.gnome.org/GNOME/gtk/-/issues/4610
Contrary to what you can read on the internet, SGCAPS keys don't work
by having capslock toggle the KBDCTRL bit, they actually have two
consecutive table entries, the first of which is for the normal
version and the second of which is for the capslocked version.
Background: SGCAPS is short for Swiss German caps because Swiss German
was the first layout to use this feature. For keys with the SGCAPS flag,
capslock has a different effect than pressing shift. For example:
Shift + ü = è, CapsLock + ü = Ü, CapsLock + Shift + ü = È
DLL loading failures should not happen under normal circumstances, but
we should at least try not to crash and and print better diagnostic
messages if they do happen.
See https://gitlab.gnome.org/GNOME/gtk/-/issues/4610
Previously, we treated CapsLock and KanaLock as part of the global
keyboard state, much like NumLock and ScrollLock, rather than using
the supplied modifier mask. This was because GDK does not have a
modifier mask for KanaLock, only for CapsLock, so it would not have been
possible to properly support it.
However, this approach ended up causing problems, with certain keyboard
shortcuts not registering when capslock was active. This was first
observed in Inkscape [0] and appears to affect shortcuts consisting of a
single key (like 'a') with no additional modifiers (wheareas shortcuts
like 'ctrl+a' work).
So now we are using the supplied GDK_LOCK_MASK instead, and dropped
support for KanaLock, which we probably don't need anyway (since regular
text input should be handled by the IME input module -- the keymap is
mainly for shortcuts and keybindings, where you don't really want
KanaLock).
[0] https://gitlab.com/inkscape/inkscape/-/issues/3082
The old code used repeated calls to `ToUnicodeEx` to populate
the translation table, which is slow and buggy. The new code
directly loads the layout driver DLLs from Windows.
See https://gitlab.gnome.org/GNOME/gtk/-/merge_requests/4338
Unref private spool_io of GtkPrintJob before setting it to a new one
in gtk_print_job_set_source_file() and gtk_print_job_set_source_fd()
to prevent a leak.
Fixes: #4627
We are no longer using PangoFT2 APIs in this demo, so make sure that we build
it on all builds since we already depend on a HarfBuzz/Pango version that
provide everything that we need here.
Drop the unnecessary pangofc-font.h include as a result.
Like what was done on gtk/language-names.c, acquire the language names via the
native Windows NLS APIs, eliminating a run-time dependency on iso-codes on
Windows.
Instead of relying on the iso-codes package, use the native Windows NLS APIs to
acquire the localized (translated) language names so that we do not need to
incur an extra runtime dependency on Windows. It's not coverering 100% of the
languages that we would like to support through this, but should cover much of
the things that are required.
We aren't really using PangoFT2 for [language|script]-names.c, and are
always using items from them, so make sure they are being built.
Also always include the pangoft2 dependency in gtk_dep if it is found.
We were handling events in the wrong order,
by doing async calls for some of them, but not
for all of them.
And we were not taking into account that GFileMonitors
RENAMED events may or may not move a file on top
of an existing file.
Fixes: #3784
Document the return value and more importantly, specify that a call to
`gsk_renderer_realize()` needs to be matched with a call
`gsk_renderer_unrealize()`.
Prevents issues like https://gitlab.gnome.org/GNOME/gtk/-/issues/4625
Without building the demos, nothing gets installed into $prefix/share/icons/hicolor. Which makes running
`gtk4-update-icon-cache` on the machine causes an error. This is easily reproducible on a Windows machine with MSVC where
there is nothing pre-installed on hicolor icon theme and that makes building gtk without the demos fails with "No such file or directory".
libpng wants to receive samples in either RGB or RGBA order, whether
each sample is big-endian or not. This resolves test failures in
testsuite/gdk/memorytexture.c (and a lot of reftests) on s390x, and
probably the PowerPC family too.
Modifying the test to show the color in use and write out the PNG bytes
to a file, and running the memorytexture test on s390x, produces a PNG
that loads with the correct color values in GIMP (on an x86_64 machine),
which seems like evidence that this is the correct change and not just
compensating errors.
Resolves: https://gitlab.gnome.org/GNOME/gtk/-/issues/4616
Signed-off-by: Simon McVittie <smcv@debian.org>
If we ended up on no output at all, keep the HiDPI scale as is, as it
likely means we were on a workspace that was switched away from. By
keeping the same scale, we avoid unnecessary scale changes that would
otherwise take place if the scale when on monitors would end up being
more than 1.
clang-tidy says:
gtklabel.c:1188:15: warning: Although the value stored to 'mid' is used in the enclosing expression, the value is never actually read from 'mid'
min = mid = text_width;
^ ~~~~~~~~~~
Which seems right since mid will be assigned to at the beginning of the
next loop iteration anyway.
If we have a GDK_ACTION_MOVE, we need to delete the selection. However,
previously this only worked when the drop target and drag source were
different applications, as the selection would get messed up along the
way.
Instead, we stash marks for the duration of the operation so that we can
delete the appropriate selection when completing the move.
That way we ensure that the GL context(s) get disposed, which they
previously weren't due to them still being the current context.
This also implicitly adds testing of gLContext destruction, which
previously wasn't ever done by any test.
The change to use ld and objcopy for resources
had some side-effects: it leaked a few symbols
and made our stack executable. We don't want that.
Use -z nonexecstack and --strip-all to avoid this.
Fixes: #4598
Everything that makes use of gtk_printer_settings_get should be nullable
Because the hashtable might not contain the key and there's no default value provided
Pango may not do this for us, so don't rely on it.
We only show one face with a given name, and we
prefer a variable face over a non-variable one.
The check for variable faces requires new Pango
API that will be in Pango 1.52.
Allowing to tweak the axes of named instances does
not do any harm. If we don't, we have to worry that
we need at least one non-named-instance in the face
list, and make it more obvious how to pick it out.
If the application window is measured with for_size -1 horizontally,
this code clearly passes something lower to the parent class measure()
implementation. Only subtract the menubar_height if we're passed a
for_size > -1.
This has lots of issues:
* It randomly crashes when data is loading while the dnd goes away.
* The data gets randomly reset at the wrong time
* Can't scroll the window on Wayland
* ...
But it's better than nothing, so better get it committed.
After performing an action such as undo/redo, we need to actually scroll
to the position where the operation occurred.
I do note that the scroll here seems to often get invalidated if it is
pages away, and we never make the full scroll. But I've seen this all over
the place elsewhere too and that needs to be handled, most likely, as a
more comprehensive fix for scrolling during line validation.
Related #4575
It's cheap to store the selection position, so always set it even if we
are in a user section. Otherwise, we risk not having the right position
when starting a delete action within a begin_user_action(),
end_user_action() pair.
Related #4575
This adds a test to expose the failure of #4575 which results in the
selection being incorrect when performing a delete as we are likely
already in a begin_user_action()/end_user_action() pair.
Related #4575
We don't need to apply these here, as it will clear the selection which is
needed for the undo. Otherwise we won't be able to test that we end up at
the right selection afterwards.
Instead of just passing major/minor, pass them twice, once for GL and
once for GLES. This way, we don't need to check for GL and GLES
separately.
If something is supported unconditionally, passing 0/0 works fine.
That said, I'd like to group the arguments somehow, because otherwise
it's just a confusing list of numbers - but I have no idea how to do
that.
We want critical GL debug messages to be critical, so that the testsuite
sudokus itself when they appear.
This is relevant in particular for GLES warnings in the GLES runner,
because its warnings can cause crashes on GL drivers less forgiving than
Mesa.
Related: #4571
At last as long as widgets like GtkFlowBox and
GtkGrid still trigger this, it is not a great
idea to have this warning in a stable release.
So remove it for 4.6
When destroying the EGLSurface or GLXDrawable of a GdkSurface, make sure
the current context is not still bound to it.
If it is, clear the current context.
Fixes#4554
We now have a boolean setting that determines whether the high-contrast
theme should be used. Support it by automatically setting the existing
`gtk-theme-name` and `gtk-icon-theme-name` properties when enabled.
With that, it is no longer necessary to change the regular theme settings
for high-contrast, so toggling between high-contrast and a non-default
theme finally works reliably.
Limit the diff region to 30 rectangles (randomly chosen because it
looked big enough to not trigger by accident and small enough to not
cause performance issues).
If the diff region gets more complicated, we abort to the parent node
and use its bounds as the diff region instead and then continue diffing
the rest of the node tree.
Fixes: #4560Fixes: #2396
Functional package managers such as GNU Guix rely on environment
variables such as GI_TYPELIB_PATH to discover the system libraries and
resources; extend rather than override them.
* testsuite/introspection/meson.build (env): New variable that extends
rather than override the GI_TYPELIB_PATH and LD_PRELOAD environment
variables.
(api): Use the above as the value of the 'env' keyword argument.
The introspection tests depend on the pygobject module, but we currently
are not checking if it's available at configuration time, which means we
can get build failures like:
> ModuleNotFoundError: No module named 'gi'
when running the test suite.
Generates a graph visualizing calls to gtk_widget_measure().
Generation of the graph can be slow - like when it forces Pango to wrap
a huge label 1000s of times.
You can dnd the graph to look at it closer or to impress people in
gitlab issues.
It makes sense to connect the begin/update/end events
for touchpad swipes and pinches in a sequence. This
commit adds the plumbing for it, but not backends
are setting sequences yet.
We now require a Pango version that requires Visual Studio 2015 or later to
build, and non-UCRT-based (VS2013) binaries may not bode well with
UCRT-based binaries (VS2015+). Drop the support for VS2013 as a result.
This reverts commit e208e0e07886248d4d86118aa5591c9882f0ed5c.
We run into trouble on X11 if the widgets
in the drag icon have drop targets attached.
Prevent this by suppressing event delivery
to drag icons outright.
We finish the write to the output stream long after the stream has been
closed, so we want to keep the event handler around to do just that.
Instead, remove the handler on finalize.
The OutputStream needs to write a 0 byte end of stream Property. We need
to track if that has been written, and we do that with that new
property.
We also use that property to always request flushes when the stream is
being closed, so that we don't wait for another flush() call.
We need to be very careful when writing data, because if we aren't, sync
functions will be called on the output stream and X11 does not like that
at all.
We were sometimes ending printer enumeration prematurely,
and the code was confused about the meaning of found_printer.
The new setup follows these rules:
- We *only* end the search prematurely if found_printer
is set, which indicates that we found the right printer
- We *always* call find_printer_idle exactly once, and
make it return less than perfect matches like the
default printer, or the first printer we found
Fixes: #4439
If we've already done the tracking into the parent muxer, there is no need
to do it again. This can save a great deal of recursive work when adding
items to the muxer.
This makes showing the context menu in gnome-text-editor repeatedly fast
even as spelling corrections are changed.
It is likely that this could fix#4422 as well.
Fixes#4519
Fixes https://gitlab.gnome.org/GNOME/gnome-text-editor/-/issues/220
When handling action-added callbacks the code was previously using a
freeze_notify/thaw_notify in all cases. This turns out to allocate a
significant amount of memory when called a lot.
That said, it shouldn't be getting called this much but given the current
state of affairs elsewhere in GtkActionMuxer, this brought temporary
allocations down from 9MiB to 9KiB in gnome-text-editor after showing
the context menu a few times.
Related #4422
I saw this coming across through a ffi boundary in Sysprof, and we wanted
to keep most things within GDK using native marshalling to improve
profiler results when frame pointers are not used.
Instead of allocation width for height for width for height or whatever
that code was doing, actually allocate the size we were given or the
requested size, whatever is larger.
Don't just pass on measure() calls, but actually behave in the way we
behave during size allocate.
This should improve cases where GtkScrolledWindow is used with GTK_POLICY_NEVER.
When loading .mp3 files the duration is initially unknown. Before this
change it was reported as a large integer (since GST_CLOCK_TIME_NONE is
-1). Now it's correctly reported as 0.
We want this to take precedence in the wayland platform to other
modules that might be loaded via the IO extension point. None of
those is going to bode well in this platform.
Fixes: https://gitlab.gnome.org/GNOME/gtk/-/issues/4443
This adds a new row to the Global/Information section which displays the
GTK im-module that is likely to be in use unless changed by an application.
It responds to updates of GtkSettings:gtk-im-module unless the
GTK_IM_MODULE environment variable is set.
Fixes#4512
When returning surrounding context to input methods,
include at least 2 words before and after the insertion
point.
Update the affected input method tests.
For libANGLE to work with our shaders, we must use "300 es" for
the #version directive in our shaders, as well as using the non-legacy/
non-GLES codepath in the shaders. In order to check whether we are
using the GLSL 300 es shaders, we check whether we are using a GLES 3.0+
context. As a result, make ->glsl_version a const char* and make sure
the existing shader version macros are defined apprpriately, and add a
new macro for the "300 es" shader version string.
This will allow the gtk4 programs to run under Windows using EGL via
libANGLE. Some of the GL demos won't work for now, but at least this
makes things a lot better for using GL-accelerated graphics under Windows
for those that want to or need to use libANGLE (such as those with
graphics drivers that aren't capable of our Desktop (W)GL requirements in
GTK.
.. when creating the surface (with the HWND associated with the
newly-created surface) as well as destroying the surface (with NULL,
since the HWND is going to be destroyed), so that we can tie the EGL
calls to the HWND that we want to do the EGL stuff.
If we set the placeholder text before setting a buffer, we end up with
both the placeholder *and* the buffer's contents visible at the same
time.
Fixes: #4376
We use gtk_gesture_get_last_event() underneath at places that need to
work during ::proximity emission. Since GtkGesture only tracks events
while there are button/touch presses involved, this is not going to
bring the right result there.
Use gtk_event_controller_get_current_event() consistently inside,
which always pokes at the event being handled (which is the correct
intent here).
In some circumstances (e.g. activating with a stylus something that
closes a window), we can receive zwp_tablet_tool.proximity_out without
receiving a zwp_tablet_tool.up beforehand.
In those cases, we are not expecting neither .up nor .button, so
reset the stylus device button modifiers on proximity_out.
Fixes: https://gitlab.gnome.org/GNOME/gtk/-/issues/4103
We are looking up the seat logical pointer modifiers (i.e. the wl_pointer),
not the ones for the tablet tool device. This breaks accounting further
along in GTK leaving stuck implicit grabs.
Fixes: https://gitlab.gnome.org/GNOME/gtk/-/issues/4102
The idea of within-margin is to scroll as little
as possible to bring the mark within the margins
defined by the factor. The code was achieving
that when scrolling down, but not when scrolling
up. This change makes things symmetrical.
Fixes: #4325
Update the functions that were updated in the previous commit to have all
GdkSurface variables named as 'surface' instead of the GTK-3.x-era window, to
make things more consistent across the board. Also fix formatting a bit.
Make the toplevel surface respond to size computations unless it is just being
created, or maximized, made fullscreen or underwent an AeroSnap operation.
This will ensure that the surface size is properly computed in time, so that
surfaces can be resized as needed.
This will fix issues 3728 and 3799.
On Windows with nVidia drivers at least, when we create a legacy context
via wglCreateContext(), we may still get a (W)GL 4.x context. Allow
such contexts to also use GLSL version 130 instead of 110, so that
things do continue to work.
It turns out we can't just use the size returned
by the memory stream as-is, since it may contain
unfilled garbage at the end, which utf8 validation
will choke on. So, cut it off at the first '\0'
we find.
When the iter is at the end of the buffer,
gtk_text_view_get_iter_location returns a
rectangle with width 0, which in turn makes
gdk_rectangle_intersect return FALSE.
Avoid that by always giving the rectangle
non-empty dimensions.
Fixes: #4503
As far as I can tell, the code here is redundant and probably ended up
this way for historical reasons. A drag surface without
`->is_drag_surface` would be created if `gdk_display_create_surface`
were called with `GDK_SURFACE_TEMP`, but drag surfaces never seem to be
created that way.
In `gtk4-demos`, drag and drop and popovers seem to be working normally
with this.
Setting variations to their default value causes
them to show up in the serialization of the font
description - a font description has no idea about
the default values, so can't filter them out.
Avoid that.
Try to compute a min size that matches the current aspect ratio.
This means that when interactively resizing, we adapt the min size to
the current window area dynamically.
And that means that we always have a min size that is large enough, but
users can interactively cause it to be small-width x large-height,
large-width x small-width or anything inbetween.
Printing the affected widget leads people to assume that it is to blame
for the error. However, the widget is the object the function is being
called on, not the caller. And the caller is doing it wrong.
Usually the caller is the parent widget, so we could print that one, but
it's only usually, it can be an issue propagating from a grandparent and
it doesn't tell you from where the function is called (allocation or
measuring), so you need a debugger anyway.
So don't put anything there instead.
When the stack is homogeneous in only one direction, the other direction
may produce min sizes to small for all children. Make sure to query at
least the min size for those.
If halign=fill, force adjustment to height-for-width.
If valign=fill, force adjustment to width-for-height.
Otherwise look at request mode.
This way we don't try to adapt the filled dimension and only adjust
the one that is not set to fill.
It's not expensive to check it because we'll cache the dfault size
request anyway, and people do it wrong a lot.
As a bonus, don't do any return_if_fail(), just use the min size
instead.
Ensure that we take the DPI scaling into account so that surfaces will
be placed at their correct positions upon an AeroSnap operation on HiDPI
displays.
Also, use the X coordinate of the surface as-is during snap up so that
we do not inadvertently move the surface to the very left. Also fix the
AeroSnap indicator drawing for snap up so that it is drawn at the
correct places.
Since we are updating these functions, make the old GdkWindow-era
variable names to match better the names we use nowadays.
g_log_writer_standard_streams just puts all the logs
out onto stderr and stdout if we don't stop it. Pango
recently grew a bunch of g_debug calls, and those were
now showing up, making all the reftests fail.
When the compose file is a symbolic link, take the link itself's
modification time into account (in addition to its target's) in
determining whether to invalidate the compose cache.
This is useful e.g. on NixOS systems where the compose file might point
to a store path with an irrelevant modification time, and we want the
cache to expire when the symlink itself changes.
This grab-induced crossing event may come from outer means while there are
buttons pressed (e.g. WM window drags/resizes in X11), the implicit active
state should be undone in that situation.
Also, separate the handling of GDK_LEAVE_NOTIFY, as it's fundamentally
different from GDK_TOUCH_END/CANCEL handling.
Fixes: https://gitlab.gnome.org/GNOME/gtk/-/issues/4416
The sequence should be cancelled from the gesture despite its current state.
Also, there was a piece of pointer emulation that was not dropped here,
maybe breaking things further for the pointer emulated touchpoint.
Fixes: https://gitlab.gnome.org/GNOME/gtk/-/issues/4387
By adding the `docs_url` key in the project configuration file,
gi-docgen will generate an OpenSearch XML file, which allows to add
docs.gtk.org/<reference> as a "search engine" in web browsers.
I forgot to remove the '-Werror=' part from all the extra warnings, so
the warning/error flags we generated were '-Werror=-Werror=warning-flag'
or 'W-Werror=warning-flag' - but because our compiler flag checking
infrastructure works so nicely, it just ignored these obviously wrong
flags.
Fixes commit 362e91c40b
We only want to determine the size pixel-exact, not pango-unit-exact, so
don't spend lots of time wondering if text is half a pixel or a quarter
pixel wider.
Do kep them for debug and debugoptimized builds though.
Keeping -Werror flags in release builds causes issues with forward
compatibility, when new compiler releases or different toolchains
suddenly cause those warnings to be emitted during compilation.
While we certainly want those issues to be investigated and fixed, they
should not prevent anyone from building GTK until they are.
Resolves#4388
We have a tight coupling with pango, whenever new
pango API appears, our build usually breaks. So
just make our flatpak manifests build pango from git.
Non-root widgets should unrealize their ATContext, if they have one,
when they are unrooted, as they don't have a connection to a top level
any more.
Fixes: #4421
Use the debug envvar 'GDK_DEBUG=gl-egl' to determine whether we want to try to
initialize EGL first before trying WGL, as a means for people to more easily
enable EGL support on Windows to test EGL there (such as to debug the shaders,
for instance)
This will clean up the EGL code in GDK-Win32, as well as fixing crashes caused
by using an invalid EGL context in gdk_gl_context_make_current() as we did not
store up the EGL context in the correct place (lost during the transition to
the common EGL initialization code).
On the Windows/libANGLE side, the initialization of EGL has now fully moved to
the common code in GDK, but we will still default on WGL for now. Help is
really appreciated for fixing the shaders on libANGLE!
We need to ensure that gdk_display_get_egl_display() is available even if EGL
is not enabled in the build, so that things will continue to link and work.
For builds without EGL, just return NULL.
This will port the EGL code in GDK-Win32 to use the common GDK code to
initialize EGL. However, at the current state, although EGL is
correctly initialized, this code is disabled for now since
gdk_gl_context_make_current() fails as the shaders do not work for EGL
via libANGLE on Windows.
We can now clean things up in gdkglcontext-win32-egl.c as a result.
<property name="label">“Copy” will copy the selected data the clipboard, “Paste” will show the current clipboard contents. You can also drag the data to the bottom.</property>
<property name="text">Grumpy wizards make toxic brew for the evil Queen and Jack. A quick movement of the enemy will jeopardize six gunboats. The job of waxing linoleum frequently peeves chintzy kids. My girl wove six dozen plaid jackets before she quit. Twelve ziggurats quickly jumped a finch box.
Разъяренный чтец эгоистично бьёт пятью жердями шустрого фехтовальщика. Наш банк вчера же выплатил Ф.Я. Эйхгольду комиссию за ценные вещи. Эх, чужак, общий съём цен шляп (юфть) – вдрызг! В чащах юга жил бы цитрус? Да, но фальшивый экземпляр!
<property name="text">Grumpy wizards make toxic brew for the evil Queen and Jack. A quick movement of the enemy will jeopardize six gunboats. The job of waxing linoleum frequently peeves chintzy kids. My girl wove six dozen plaid jackets before she quit. Twelve ziggurats quickly jumped a finch box.
Разъяренный чтец эгоистично бьёт пятью жердями шустрого фехтовальщика. Наш банк вчера же выплатил Ф.Я. Эйхгольду комиссию за ценные вещи. Эх, чужак, общий съём цен шляп (юфть) – вдрызг! В чащах юга жил бы цитрус? Да, но фальшивый экземпляр!
"I'd just like to interject for a moment. What you're referring to as Linux, is in fact, GNU/Linux, or as I've recently taken to calling it, GNU plus Linux. Linux is not an operating system unto itself, but rather another free component of a fully functioning GNU system made useful by the GNU corelibs, shell utilities and vital system components comprising a full OS as defined by POSIX.\n"
"\n"
"Many computer users run a modified version of the GNU system every day, without realizing it. Through a peculiar turn of events, the version of GNU which is widely used today is often called \"Linux\", and many of its users are not aware that it is basically the GNU system, developed by the GNU Project.\n"
"\n"
"There really is a Linux, and these people are using it, but it is just a part of the system they use. Linux is the kernel: the program in the system that allocates the machine's resources to the other programs that you run. The kernel is an essential part of an operating system, but useless by itself; it can only function in the context of a complete operating system. Linux is normally used in combination with the GNU operating system: the whole system is basically GNU with Linux added, or GNU/Linux. All the so-called \"Linux\" distributions are really distributions of GNU/Linux.");
@@ -13,6 +13,8 @@ Each node has its own `<node-name>` and supports a custom set of properties, eac
When serializing and the value of a property equals the default value, this value will not be serialized. Serialization aims to produce an output as small as possible.
To embed newlines in strings, use \A. To break a long string into multiple lines, escape the newline with a \.
# Nodes
### container
@@ -135,6 +137,23 @@ Creates a node like `gsk_cross_fade_node_new()` with the given properties.
Creates a node like `gsk_debug_node_new()` with the given properties.
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
